From: kgene.kim@samsung.com (Kukjin Kim)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/4] ARM: EXYNOS: PL330 MDMA1 fix for revision 0 of Exynos4210 SOC
Date: Fri, 09 Nov 2012 19:19:58 +0900 [thread overview]
Message-ID: <0e8801cdbe63$c52b6e50$4f824af0$%kim@samsung.com> (raw)
In-Reply-To: <201211081054.41649.b.zolnierkie@samsung.com>
Bartlomiej Zolnierkiewicz wrote:
>
> Ah, okay. Here is full simplified patch.
>
> From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> Subject: [PATCH v2] ARM: EXYNOS: PL330 MDMA1 fix for revision 0 of
> Exynos4210 SOC
>
> Commit 8214513 ("ARM: EXYNOS: fix address for EXYNOS4 MDMA1")
> changed EXYNOS specific setup of PL330 DMA engine to use 'non-secure'
> mdma1 address instead of 'secure' one (from 0x12840000 to 0x12850000)
> to fix issue with some Exynos4212 SOCs. Unfortunately it brakes
> PL330 setup for revision 0 of Exynos4210 SOC (mdma1 device cannot
> be found at 'non-secure' address):
>
> [ 0.566245] dma-pl330 dma-pl330.2: PERIPH_ID 0x0, PCELL_ID 0x0 !
> [ 0.566278] dma-pl330: probe of dma-pl330.2 failed with error -22
>
> Fix it by using 'secure' mdma1 address on Exynos4210 revision 0 SOC.
>
> Reviewed-by: Tomasz Figa <t.figa@samsung.com>
> Cc: Kukjin Kim <kgene.kim@samsung.com>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> arch/arm/mach-exynos/dma.c | 3 +++
> arch/arm/mach-exynos/include/mach/map.h | 1 +
> 2 files changed, 4 insertions(+)
>
> Index: b/arch/arm/mach-exynos/dma.c
> ===================================================================
> --- a/arch/arm/mach-exynos/dma.c 2012-11-07 18:20:36.561743865 +0100
> +++ b/arch/arm/mach-exynos/dma.c 2012-11-08 10:48:23.445067606 +0100
> @@ -275,6 +275,9 @@ static int __init exynos_dma_init(void)
> exynos_pdma1_pdata.nr_valid_peri =
> ARRAY_SIZE(exynos4210_pdma1_peri);
> exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
> +
> + if (samsung_rev() == EXYNOS4210_REV_0)
> + exynos_mdma1_device.res.start = EXYNOS4_PA_S_MDMA1;
> } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
> exynos_pdma0_pdata.nr_valid_peri =
> ARRAY_SIZE(exynos4212_pdma0_peri);
> Index: b/arch/arm/mach-exynos/include/mach/map.h
> ===================================================================
> --- a/arch/arm/mach-exynos/include/mach/map.h 2012-11-07
> 18:20:44.801743862 +0100
> +++ b/arch/arm/mach-exynos/include/mach/map.h 2012-11-08
> 10:48:40.597067605 +0100
> @@ -92,6 +92,7 @@
>
> #define EXYNOS4_PA_MDMA0 0x10810000
> #define EXYNOS4_PA_MDMA1 0x12850000
> +#define EXYNOS4_PA_S_MDMA1 0x12840000
> #define EXYNOS4_PA_PDMA0 0x12680000
> #define EXYNOS4_PA_PDMA1 0x12690000
> #define EXYNOS5_PA_MDMA0 0x10800000
Looks good to me, and I think, this can be handled separate from this
series.
Vinod, if you're ok, let me pick this up into Samsung tree.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
next prev parent reply other threads:[~2012-11-09 10:19 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-29 9:59 [PATCH 0/4] DMA: PL330 fixes Bartlomiej Zolnierkiewicz
2012-10-29 9:59 ` [PATCH 1/4] DMA: PL330: fix locking in pl330_free_chan_resources() Bartlomiej Zolnierkiewicz
2012-10-29 21:48 ` Jassi Brar
2012-11-30 10:59 ` Bartlomiej Zolnierkiewicz
2012-11-30 18:07 ` Vinod Koul
2012-12-12 15:08 ` Bartlomiej Zolnierkiewicz
2012-10-29 9:59 ` [PATCH 2/4] ARM: EXYNOS: PL330 MDMA1 fix for revision 0 of Exynos4210 SOC Bartlomiej Zolnierkiewicz
2012-10-29 17:24 ` Kukjin Kim
2012-10-30 8:56 ` Bartlomiej Zolnierkiewicz
2012-11-08 4:49 ` Kukjin Kim
2012-11-08 9:54 ` Bartlomiej Zolnierkiewicz
2012-11-09 10:19 ` Kukjin Kim [this message]
2012-11-20 12:23 ` Kukjin Kim
2012-10-29 9:59 ` [PATCH 3/4] ARM: dts: exynos4: add node for PL330 MDMA1 controller Bartlomiej Zolnierkiewicz
2012-11-22 10:57 ` Bartlomiej Zolnierkiewicz
2012-11-23 1:56 ` Kukjin Kim
2012-10-29 9:59 ` [PATCH 4/4] DMA: PL330: add device tree property for DMA_MEMCPY capability Bartlomiej Zolnierkiewicz
2012-10-29 21:45 ` Jassi Brar
2012-10-30 9:21 ` Bartlomiej Zolnierkiewicz
2012-11-09 6:11 ` Jassi Brar
2012-11-30 10:56 ` Bartlomiej Zolnierkiewicz
2012-12-12 7:36 ` Jassi Brar
2012-12-12 15:04 ` Bartlomiej Zolnierkiewicz
2012-10-29 10:05 ` [PATCH 0/4] DMA: PL330 fixes Tomasz Figa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='0e8801cdbe63$c52b6e50$4f824af0$%kim@samsung.com' \
--to=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox