From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: "Maxime Ripard" <mripard@kernel.org>,
"Chen-Yu Tsai" <wens@csie.org>, "Clément Bœsch" <u@pkh.me>
Cc: "Willy Liu" <willy.liu@realtek.com>,
"Rob Herring" <robh+dt@kernel.org>,
"David S. Miller" <davem@davemloft.net>,
"Andrew Lunn" <andrew@lunn.ch>,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
"Clément Bœsch" <u@pkh.me>
Subject: Re: [PATCH] arm64: dts: sun50i: h5: NanoPI Neo 2: phy-mode rgmii-id
Date: Mon, 30 Aug 2021 22:49:37 +0200 [thread overview]
Message-ID: <116454729.UZi3dMzWh7@jernej-laptop> (raw)
In-Reply-To: <20210830151645.18018-1-u@pkh.me>
Hi!
Dne ponedeljek, 30. avgust 2021 ob 17:16:45 CEST je Clément Bœsch napisal(a):
> Since commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay
> config") network is broken on the NanoPi Neo 2.
>
> This patch changes the phy-mode to use internal delays both for RX and
> TX as has been done for other boards affected by the same commit.
>
> Fixes: bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config")
This commit fixes DT issue, so "fixes" tag should be:
Fixes: 44a94c7ef989 ("arm64: dts: allwinner: H5: Restore EMAC changes")
Here, a node with wrong phy-mode property was added to NanoPi Neo 2 board DT.
Other than that, this patch is fine and once fixes tag is fixed, you can add:
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
For next version, you should:
- change fixed tag
- add my review-by tag right above your signed-off-by tag
- mark patch as v2 (add "-v2" parameter to git format-patch)
- describe change right under "---" line
Note, if you borked something when sending, you should mark patch or patch
series as "RESEND", so recipients don't look for changes in two subsequent e-
mails (--subject-prefix="RESEND PATCH").
Thanks for the fix!
Best regards,
Jernej
> Signed-off-by: Clément Bœsch <u@pkh.me>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
> b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts index
> 02f8e72f0cad..05486cccee1c 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
> @@ -75,7 +75,7 @@ &emac {
> pinctrl-0 = <&emac_rgmii_pins>;
> phy-supply = <®_gmac_3v3>;
> phy-handle = <&ext_rgmii_phy>;
> - phy-mode = "rgmii";
> + phy-mode = "rgmii-id";
> status = "okay";
> };
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-08-30 20:51 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-30 15:16 [PATCH] arm64: dts: sun50i: h5: NanoPI Neo 2: phy-mode rgmii-id Clément Bœsch
2021-08-30 20:49 ` Jernej Škrabec [this message]
2021-08-30 21:25 ` Clément Bœsch
2021-08-31 20:17 ` Jernej Škrabec
2021-08-30 21:50 ` Andrew Lunn
2021-08-31 19:53 ` Jernej Škrabec
2021-08-31 20:53 ` Andrew Lunn
2021-09-01 15:31 ` Jernej Škrabec
2021-09-03 9:21 ` Maxime Ripard
2021-09-05 0:20 ` [PATCH v2] arm64: dts: allwinner: h5: NanoPI Neo 2: Fix ethernet node Clément Bœsch
2021-09-05 0:42 ` Andrew Lunn
2021-09-06 8:03 ` Maxime Ripard
2021-08-30 21:52 ` [PATCH] arm64: dts: sun50i: h5: NanoPI Neo 2: phy-mode rgmii-id Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=116454729.UZi3dMzWh7@jernej-laptop \
--to=jernej.skrabec@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=mripard@kernel.org \
--cc=robh+dt@kernel.org \
--cc=u@pkh.me \
--cc=wens@csie.org \
--cc=willy.liu@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox