linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: ygardi@codeaurora.org (ygardi at codeaurora.org)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] phy: qcom-ufs: export symbols needed by main drivers
Date: Mon, 2 Feb 2015 14:42:51 -0000	[thread overview]
Message-ID: <116ee863da7b4ad774c6dc3ff7995a10.squirrel@www.codeaurora.org> (raw)
In-Reply-To: <1840882.huchmEIh5K@wuerfel>

Reviewed-by: Yaniv Gardi <ygardi@codeaurora.org>

> The qcom ufs phy support is split into three separate loadable
> modules, however none of the interfaces are exported, resulting
> in a link error:
>
> ERROR: "ufs_qcom_phy_power_off" [drivers/phy/phy-qcom-ufs-qmp-20nm.ko]
> undefined!
> ERROR: "ufs_qcom_phy_power_on" [drivers/phy/phy-qcom-ufs-qmp-20nm.ko]
> undefined!
> ERROR: "ufs_qcom_phy_exit" [drivers/phy/phy-qcom-ufs-qmp-20nm.ko]
> undefined!
> ERROR: "ufs_qcom_phy_generic_probe" [drivers/phy/phy-qcom-ufs-qmp-20nm.ko]
> undefined!
> ERROR: "ufs_qcom_phy_init_vregulators"
> [drivers/phy/phy-qcom-ufs-qmp-20nm.ko] undefined!
> ERROR: "ufs_qcom_phy_init_clks" [drivers/phy/phy-qcom-ufs-qmp-20nm.ko]
> undefined!
> ERROR: "ufs_qcom_phy_calibrate" [drivers/phy/phy-qcom-ufs-qmp-20nm.ko]
> undefined!
> ERROR: "ufs_qcom_phy_remove" [drivers/phy/phy-qcom-ufs-qmp-20nm.ko]
> undefined!
> ERROR: "get_ufs_qcom_phy" [drivers/phy/phy-qcom-ufs-qmp-20nm.ko]
> undefined!
> ERROR: "ufs_qcom_phy_power_off" [drivers/phy/phy-qcom-ufs-qmp-14nm.ko]
> undefined!
> ERROR: "ufs_qcom_phy_power_on" [drivers/phy/phy-qcom-ufs-qmp-14nm.ko]
> undefined!
> ERROR: "ufs_qcom_phy_exit" [drivers/phy/phy-qcom-ufs-qmp-14nm.ko]
> undefined!
> ERROR: "ufs_qcom_phy_generic_probe" [drivers/phy/phy-qcom-ufs-qmp-14nm.ko]
> undefined!
> ERROR: "ufs_qcom_phy_init_vregulators"
> [drivers/phy/phy-qcom-ufs-qmp-14nm.ko] undefined!
> ERROR: "ufs_qcom_phy_init_clks" [drivers/phy/phy-qcom-ufs-qmp-14nm.ko]
> undefined!
> ERROR: "ufs_qcom_phy_calibrate" [drivers/phy/phy-qcom-ufs-qmp-14nm.ko]
> undefined!
> ERROR: "ufs_qcom_phy_remove" [drivers/phy/phy-qcom-ufs-qmp-14nm.ko]
> undefined!
> ERROR: "get_ufs_qcom_phy" [drivers/phy/phy-qcom-ufs-qmp-14nm.ko]
> undefined!
>
> This exports all of the symbols that are provided by the base library
> module and used by the two driver modules.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Fixes: adaafaa393ef ("phy: qcom-ufs: add support for QUALCOMM Technologies
> UFS PHY drivers")
> ---
>
> The broken patch is currently in the scsi tree, so if the phy maintainer
> thinks that my fix is correct, it should go there too.
>
> An alternative approach would be to link all three phy-qcom-ufs source
> files into a single module.
>
>  drivers/phy/phy-qcom-ufs.c | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
>
> diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c
> index 44ee983d57fe..c8f8c2dac18c 100644
> --- a/drivers/phy/phy-qcom-ufs.c
> +++ b/drivers/phy/phy-qcom-ufs.c
> @@ -73,6 +73,7 @@ int ufs_qcom_phy_calibrate(struct ufs_qcom_phy
> *ufs_qcom_phy,
>  out:
>  	return ret;
>  }
> +EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate);
>
>  struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev,
>  				struct ufs_qcom_phy *common_cfg,
> @@ -110,6 +111,7 @@ struct phy *ufs_qcom_phy_generic_probe(struct
> platform_device *pdev,
>  out:
>  	return generic_phy;
>  }
> +EXPORT_SYMBOL_GPL(ufs_qcom_phy_generic_probe);
>
>  /*
>   * This assumes the embedded phy structure inside generic_phy is of type
> @@ -121,6 +123,7 @@ struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy
> *generic_phy)
>  {
>  	return (struct ufs_qcom_phy *)phy_get_drvdata(generic_phy);
>  }
> +EXPORT_SYMBOL_GPL(get_ufs_qcom_phy);
>
>  static
>  int ufs_qcom_phy_base_init(struct platform_device *pdev,
> @@ -228,6 +231,7 @@ ufs_qcom_phy_init_clks(struct phy *generic_phy,
>  out:
>  	return err;
>  }
> +EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_clks);
>
>  int
>  ufs_qcom_phy_init_vregulators(struct phy *generic_phy,
> @@ -252,6 +256,7 @@ ufs_qcom_phy_init_vregulators(struct phy *generic_phy,
>  out:
>  	return err;
>  }
> +EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_vregulators);
>
>  static int __ufs_qcom_phy_init_vreg(struct phy *phy,
>  		struct ufs_qcom_phy_vreg *vreg, const char *name, bool optional)
> @@ -443,6 +448,7 @@ out_disable_src:
>  out:
>  	return ret;
>  }
> +EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_ref_clk);
>
>  static
>  int ufs_qcom_phy_disable_vreg(struct phy *phy,
> @@ -485,6 +491,7 @@ void ufs_qcom_phy_disable_ref_clk(struct phy
> *generic_phy)
>  		phy->is_ref_clk_enabled = false;
>  	}
>  }
> +EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_ref_clk);
>
>  #define UFS_REF_CLK_EN	(1 << 5)
>
> @@ -523,16 +530,19 @@ static void ufs_qcom_phy_dev_ref_clk_ctrl(struct phy
> *generic_phy, bool enable)
>  		phy->is_dev_ref_clk_enabled = enable;
>  	}
>  }
> +EXPORT_SYMBOL_GPL(ufs_qcom_phy_dev_ref_clk_ctrl);
>
>  void ufs_qcom_phy_enable_dev_ref_clk(struct phy *generic_phy)
>  {
>  	ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, true);
>  }
> +EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_dev_ref_clk);
>
>  void ufs_qcom_phy_disable_dev_ref_clk(struct phy *generic_phy)
>  {
>  	ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, false);
>  }
> +EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_dev_ref_clk);
>
>  /* Turn ON M-PHY RMMI interface clocks */
>  int ufs_qcom_phy_enable_iface_clk(struct phy *generic_phy)
> @@ -561,6 +571,7 @@ int ufs_qcom_phy_enable_iface_clk(struct phy
> *generic_phy)
>  out:
>  	return ret;
>  }
> +EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_iface_clk);
>
>  /* Turn OFF M-PHY RMMI interface clocks */
>  void ufs_qcom_phy_disable_iface_clk(struct phy *generic_phy)
> @@ -573,6 +584,7 @@ void ufs_qcom_phy_disable_iface_clk(struct phy
> *generic_phy)
>  		phy->is_iface_clk_enabled = false;
>  	}
>  }
> +EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_iface_clk);
>
>  int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
>  {
> @@ -589,6 +601,7 @@ int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
>
>  	return ret;
>  }
> +EXPORT_SYMBOL_GPL(ufs_qcom_phy_start_serdes);
>
>  int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32
> tx_lanes)
>  {
> @@ -606,6 +619,7 @@ int ufs_qcom_phy_set_tx_lane_enable(struct phy
> *generic_phy, u32 tx_lanes)
>
>  	return ret;
>  }
> +EXPORT_SYMBOL_GPL(ufs_qcom_phy_set_tx_lane_enable);
>
>  void ufs_qcom_phy_save_controller_version(struct phy *generic_phy,
>  					  u8 major, u16 minor, u16 step)
> @@ -616,6 +630,7 @@ void ufs_qcom_phy_save_controller_version(struct phy
> *generic_phy,
>  	ufs_qcom_phy->host_ctrl_rev_minor = minor;
>  	ufs_qcom_phy->host_ctrl_rev_step = step;
>  }
> +EXPORT_SYMBOL_GPL(ufs_qcom_phy_save_controller_version);
>
>  int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B)
>  {
> @@ -636,6 +651,7 @@ int ufs_qcom_phy_calibrate_phy(struct phy
> *generic_phy, bool is_rate_B)
>
>  	return ret;
>  }
> +EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate_phy);
>
>  int ufs_qcom_phy_remove(struct phy *generic_phy,
>  			struct ufs_qcom_phy *ufs_qcom_phy)
> @@ -647,6 +663,7 @@ int ufs_qcom_phy_remove(struct phy *generic_phy,
>
>  	return 0;
>  }
> +EXPORT_SYMBOL_GPL(ufs_qcom_phy_remove);
>
>  int ufs_qcom_phy_exit(struct phy *generic_phy)
>  {
> @@ -657,6 +674,7 @@ int ufs_qcom_phy_exit(struct phy *generic_phy)
>
>  	return 0;
>  }
> +EXPORT_SYMBOL_GPL(ufs_qcom_phy_exit);
>
>  int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy)
>  {
> @@ -671,6 +689,7 @@ int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy)
>  	return ufs_qcom_phy->phy_spec_ops->
>  			is_physical_coding_sublayer_ready(ufs_qcom_phy);
>  }
> +EXPORT_SYMBOL_GPL(ufs_qcom_phy_is_pcs_ready);
>
>  int ufs_qcom_phy_power_on(struct phy *generic_phy)
>  {
> @@ -725,6 +744,7 @@ out_disable_phy:
>  out:
>  	return err;
>  }
> +EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_on);
>
>  int ufs_qcom_phy_power_off(struct phy *generic_phy)
>  {
> @@ -743,3 +763,4 @@ int ufs_qcom_phy_power_off(struct phy *generic_phy)
>
>  	return 0;
>  }
> +EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_off);
>
>

  parent reply	other threads:[~2015-02-02 14:42 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-28 16:18 [PATCH] phy: qcom-ufs: export symbols needed by main drivers Arnd Bergmann
2015-02-02 14:31 ` ygardi at codeaurora.org
2015-02-02 14:37   ` Kishon Vijay Abraham I
2015-02-02 14:42 ` ygardi at codeaurora.org [this message]
2015-02-02 15:30 ` James Bottomley
2015-02-02 16:26   ` hch at lst.de
2015-02-02 17:55     ` James Bottomley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=116ee863da7b4ad774c6dc3ff7995a10.squirrel@www.codeaurora.org \
    --to=ygardi@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).