From: srinidhi.kasagar@stericsson.com (srinidhi kasagar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/8] [ARM] ST-Ericsson's U8500 SMP platform, new patch set
Date: Thu, 24 Sep 2009 02:42:06 +0530 [thread overview]
Message-ID: <1253740326.21542.186.camel@vinay-desktop> (raw)
In-Reply-To: <1253735221.21542.159.camel@vinay-desktop>
I request you to apply this patch set only on stable 2.6.31 kernel.
Since there are issues in bring up the secondary core in the
mainstream kernel I did not re-base to the mainstream. I am
working on it. Apologise for not mentioning before.
- srinidhi
On Thu, 2009-09-24 at 01:17 +0530, srinidhi kasagar wrote:
> From: srinidhi kasagar <srinidhi.kasagar@stericsson.com>
>
> This adds a new machine support for ST-Ericsson's U8500 platform. This is
> an entry level patch which has bindings to existing modules like GIC, SCU,
> TWD, PL011 UART. This also adds a new SPI device STw4500 which uses ARM pl022
> bus driver. The patch is based on v2.6.31 kernel and tested on mop500 hardware
> with SMP enabled.
>
> This time I have split the patches for better readability. Also, for mfd
> device support, I have incorporated the review comments.
>
> srinidhi kasagar (8):
> [ARM]: enable SMP support for U8500 architecture
> [ARM] U8500: adds secondary cpu support, local timers
> [ARM] U8500: adds mop500 platform
> [ARM] U8500: adds basic SoC support for U8500 CPU
> [ARM] U8500: adds basic clock framework
> [ARM] U8500: adds stw4500 as pl022 device
> mfd: add U8500 STw4500 SPI device support
> pl022: fix peripheral id for ST vendor
>
> arch/arm/Kconfig | 20 ++-
> arch/arm/Makefile | 1 +
> arch/arm/mach-ux500/Kconfig | 15 ++
> arch/arm/mach-ux500/Makefile | 8 +
> .../{mach-footbridge => mach-ux500}/Makefile.boot | 0
> arch/arm/mach-ux500/board-mop500.c | 146 +++++++++++
> arch/arm/mach-ux500/clock.c | 95 +++++++
> arch/arm/mach-ux500/cpu-u8500.c | 78 ++++++
> arch/arm/mach-ux500/headsmp.S | 38 +++
> .../include/mach/clkdev.h | 0
> arch/arm/mach-ux500/include/mach/debug-macro.S | 22 ++
> arch/arm/mach-ux500/include/mach/entry-macro.S | 80 ++++++
> arch/arm/mach-ux500/include/mach/hardware.h | 129 ++++++++++
> arch/arm/mach-ux500/include/mach/io.h | 22 ++
> arch/arm/mach-ux500/include/mach/irqs.h | 71 ++++++
> arch/arm/mach-ux500/include/mach/memory.h | 18 ++
> arch/arm/mach-ux500/include/mach/mtu.h | 53 ++++
> arch/arm/mach-ux500/include/mach/setup.h | 22 ++
> arch/arm/mach-ux500/include/mach/smp.h | 29 +++
> arch/arm/mach-ux500/include/mach/system.h | 25 ++
> arch/arm/mach-ux500/include/mach/timex.h | 6 +
> arch/arm/mach-ux500/include/mach/uncompress.h | 58 +++++
> arch/arm/mach-ux500/include/mach/vmalloc.h | 18 ++
> arch/arm/mach-ux500/localtimer.c | 28 ++
> arch/arm/mach-ux500/platsmp.c | 181 ++++++++++++++
> arch/arm/mach-ux500/timer.c | 163 ++++++++++++
> drivers/mfd/Kconfig | 10 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/stw4500.c | 207 +++++++++++++++
> drivers/spi/amba-pl022.c | 2 +-
> include/linux/mfd/stw4500.h | 262 ++++++++++++++++++++
> 31 files changed, 1803 insertions(+), 5 deletions(-)
> create mode 100644 arch/arm/mach-ux500/Kconfig
> create mode 100644 arch/arm/mach-ux500/Makefile
> copy arch/arm/{mach-footbridge => mach-ux500}/Makefile.boot (100%)
> create mode 100644 arch/arm/mach-ux500/board-mop500.c
> create mode 100644 arch/arm/mach-ux500/clock.c
> create mode 100644 arch/arm/mach-ux500/cpu-u8500.c
> create mode 100644 arch/arm/mach-ux500/headsmp.S
> copy arch/arm/{mach-ep93xx => mach-ux500}/include/mach/clkdev.h (100%)
> create mode 100644 arch/arm/mach-ux500/include/mach/debug-macro.S
> create mode 100644 arch/arm/mach-ux500/include/mach/entry-macro.S
> create mode 100644 arch/arm/mach-ux500/include/mach/hardware.h
> create mode 100644 arch/arm/mach-ux500/include/mach/io.h
> create mode 100644 arch/arm/mach-ux500/include/mach/irqs.h
> create mode 100644 arch/arm/mach-ux500/include/mach/memory.h
> create mode 100644 arch/arm/mach-ux500/include/mach/mtu.h
> create mode 100644 arch/arm/mach-ux500/include/mach/setup.h
> create mode 100644 arch/arm/mach-ux500/include/mach/smp.h
> create mode 100644 arch/arm/mach-ux500/include/mach/system.h
> create mode 100644 arch/arm/mach-ux500/include/mach/timex.h
> create mode 100644 arch/arm/mach-ux500/include/mach/uncompress.h
> create mode 100644 arch/arm/mach-ux500/include/mach/vmalloc.h
> create mode 100644 arch/arm/mach-ux500/localtimer.c
> create mode 100644 arch/arm/mach-ux500/platsmp.c
> create mode 100644 arch/arm/mach-ux500/timer.c
> create mode 100755 drivers/mfd/stw4500.c
> create mode 100644 include/linux/mfd/stw4500.h
>
>
prev parent reply other threads:[~2009-09-23 21:12 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-23 19:47 [PATCH 0/8] [ARM] ST-Ericsson's U8500 SMP platform, new patch set srinidhi kasagar
2009-09-23 21:12 ` srinidhi kasagar [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1253740326.21542.186.camel@vinay-desktop \
--to=srinidhi.kasagar@stericsson.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox