From: "Heiko Stübner" <heiko@sntech.de>
To: arm@kernel.org
Cc: soc@kernel.org, linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [GIT PULL] Rockchip dts64 changes for 6.19 #1
Date: Tue, 13 Jan 2026 14:48:41 +0100 [thread overview]
Message-ID: <12544161.zAa99ISigo@diego> (raw)
In-Reply-To: <3166289.xgJ6IN8ObU@diego>
Am Dienstag, 13. Januar 2026, 14:47:36 Mitteleuropäische Normalzeit schrieb Heiko Stuebner:
> Hi soc maintainers,
>
> please find below and in the next mails Rockchip changes for for 6.20 .
darn ... subject was also supposed to be 6.20
sorry for the typo
Heiko
>
> Please pull.
> Thanks
> Heiko
>
>
> The following changes since commit 8f0b4cce4481fb22653697cced8d0d04027cb1e8:
>
> Linux 6.19-rc1 (2025-12-14 16:05:07 +1200)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git tags/v6.20-rockchip-dts64-1
>
> for you to fetch changes up to da0de806d8b46238ac3891a894806da4d1c26cdf:
>
> arm64: dts: rockchip: Add the vdpu383 Video Decoder on rk3576 (2026-01-09 20:58:40 +0100)
>
> ----------------------------------------------------------------
> New boards: Orange Pi CM5 module + Baseboard, Radxa CM5 module + IO-board.
> PCIe-slot-overlay for rk3576-evb1
>
> New peripherals: some of the video decoders on rk3576 and rk3588
>
> Enabled peripherals: many RK3588-NPUs and a lot of other peripherals on
> a plethora of boards.
>
> ----------------------------------------------------------------
> Alexey Charkov (7):
> arm64: dts: rockchip: Add overlay for the PCIe slot on RK3576 EVB1
> arm64: dts: rockchip: enable UFS controller on FriendlyElec NanoPi M5
> arm64: dts: rockchip: Use a readable audio card name on NanoPi M5
> arm64: dts: rockchip: Enable HDMI sound on FriendlyElec NanoPi M5
> arm64: dts: rockchip: Enable HDMI sound on Luckfox Core3576
> arm64: dts: rockchip: Enable HDMI sound on RK3576 EVB1
> arm64: dts: rockchip: Enable analog sound on RK3576 EVB1
>
> Chris Morgan (1):
> arm64: dts: rockchip: Add HDMI to Gameforce Ace
>
> Chukun Pan (4):
> arm64: dts: rockchip: remove rtc regulator for ArmSoM Sige5
> arm64: dts: rockchip: fix hp-det pin for ArmSoM Sige5
> arm64: dts: rockchip: enable saradc for ArmSoM Sige5
> arm64: dts: rockchip: Enable PCIe for ArmSoM Sige1
>
> David Petry (1):
> arm64: dts: rockchip: Enable second HDMI output on CM3588
>
> Detlev Casanova (2):
> arm64: dts: rockchip: Add the vdpu381 Video Decoders on RK3588
> arm64: dts: rockchip: Add the vdpu383 Video Decoder on rk3576
>
> FUKAUMI Naoki (4):
> arm64: dts: rockchip: Add EEPROMs for Radxa ROCK 4 boards
> arm64: dts: rockchip: Add EEPROMs for Radxa rk35xx boards
> dt-bindings: arm: rockchip: fix description for Radxa CM3I
> dt-bindings: arm: rockchip: fix description for Radxa CM5
>
> Heiko Stuebner (5):
> arm64: dts: rockchip: add gmac reset property to rk3368
> arm64: dts: rockchip: add mdio subnode to gmac on rk3368
> arm64: dts: rockchip: Correctly describe the ethernet phy on rk3368-lion
> arm64: dts: rockchip: enable NPU on rk3588-tiger
> arm64: dts: rockchip: enable NPU on rk3588-jaguar
>
> Joseph Kogut (3):
> dt-bindings: arm: rockchip: Add Radxa CM5 IO board
> arm64: dts: rockchip: Add rk3588 based Radxa CM5
> arm64: dts: rockchip: Add support for CM5 IO carrier
>
> Laurent Pinchart (2):
> dt-bindings: arm: rockchip: Add Orange Pi CM5 Base
> arm64: dts: rockchip: Add rk3588s-orangepi-cm5-base device tree
>
> Ondrej Jirman (3):
> arm64: dts: rockchip: Add accelerometer sensor to Pinephone Pro
> arm64: dts: rockchip: Add magnetometer sensor to Pinephone Pro
> arm64: dts: rockchip: Add light/proximity sensor to Pinephone Pro
>
> Raphaël Jakse (1):
> arm64: dts: rockchip: Fix Bluetooth on the RockPro64 board
>
> Ricardo Pardini (3):
> arm64: dts: rockchip: Enable the NPU on NanoPC T6/T6-LTS
> arm64: dts: rockchip: Enable the NPU on FriendlyElec CM3588
> arm64: dts: rockchip: Enable the NPU on Turing RK1
>
> Rob Herring (Arm) (1):
> arm64: dts: rockchip: Add missing everest,es8388 supplies to rk3399-roc-pc-plus
>
> Shawn Lin (2):
> arm64: dts: rockchip: Add PCIe clkreq stuff for RK3588 EVB1
> arm64: dts: rockchip: add dma-coherent for pcie and gmac of RK3576
>
> Torsten Duwe (1):
> arm64: dts: rockchip: Enable SPDIF audio on Rock 5 ITX
>
> .../devicetree/bindings/arm/rockchip.yaml | 15 +-
> arch/arm64/boot/dts/rockchip/Makefile | 7 +
> arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi | 22 +-
> arch/arm64/boot/dts/rockchip/rk3368.dtsi | 8 +
> .../boot/dts/rockchip/rk3399-pinephone-pro.dts | 45 ++
> .../arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts | 4 +
> arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 1 -
> .../boot/dts/rockchip/rk3399-rock-4c-plus.dts | 8 +
> arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts | 12 +
> arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi | 8 +
> .../boot/dts/rockchip/rk3399-rockpro64-v2.dts | 7 +
> arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts | 7 +
> .../boot/dts/rockchip/rk3528-armsom-sige1.dts | 18 +
> .../arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi | 10 +-
> arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 8 +
> arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts | 8 +
> .../boot/dts/rockchip/rk3576-armsom-sige5.dts | 19 +-
> .../boot/dts/rockchip/rk3576-evb1-v10-pcie1.dtso | 31 ++
> arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts | 107 +++++
> .../boot/dts/rockchip/rk3576-luckfox-core3576.dtsi | 8 +
> arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts | 34 +-
> arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts | 14 +
> arch/arm64/boot/dts/rockchip/rk3576.dtsi | 40 ++
> arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 74 ++++
> arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts | 7 +-
> .../rockchip/rk3588-friendlyelec-cm3588-nas.dts | 38 ++
> .../dts/rockchip/rk3588-friendlyelec-cm3588.dtsi | 35 +-
> arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts | 35 +-
> arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi | 36 +-
> arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts | 23 +
> .../boot/dts/rockchip/rk3588-rock-5b-plus.dts | 10 +
> arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts | 10 +
> arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi | 35 +-
> .../arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi | 35 +-
> .../boot/dts/rockchip/rk3588s-gameforce-ace.dts | 63 +++
> .../dts/rockchip/rk3588s-orangepi-cm5-base.dts | 355 ++++++++++++++++
> .../boot/dts/rockchip/rk3588s-orangepi-cm5.dtsi | 472 +++++++++++++++++++++
> .../boot/dts/rockchip/rk3588s-radxa-cm5-io.dts | 339 +++++++++++++++
> .../arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi | 280 ++++++++++++
> 39 files changed, 2262 insertions(+), 26 deletions(-)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-evb1-v10-pcie1.dtso
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-cm5-base.dts
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-cm5.dtsi
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5-io.dts
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi
>
next prev parent reply other threads:[~2026-01-13 13:48 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-13 13:47 [GIT PULL] Rockchip dts64 changes for 6.19 #1 Heiko Stuebner
2026-01-13 13:48 ` Heiko Stübner [this message]
2026-01-22 15:42 ` Krzysztof Kozlowski
-- strict thread matches above, loose matches on Subject: below --
2025-11-17 22:24 Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=12544161.zAa99ISigo@diego \
--to=heiko@sntech.de \
--cc=arm@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox