From: srinidhi.kasagar@stericsson.com (srinidhi kasagar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/8] [ARM] ST-Ericsson's U8500 SMP platform, a new patch set
Date: Thu, 15 Oct 2009 03:47:33 +0530 [thread overview]
Message-ID: <1255558653.21542.426.camel@vinay-desktop> (raw)
In-Reply-To: <1255300015.21542.404.camel@vinay-desktop>
The v3 patch is same as v2 which I have sent on 24th September, with some fixes
and re-ordering of patches are done in this version.
regards,
Srinidhi
On Mon, 2009-10-12 at 03:56 +0530, srinidhi kasagar wrote:
> From: srinidhi kasagar <srinidhi.kasagar@stericsson.com>
>
> This adds a new machine support for ST-Ericsson's U8500 platform. This is
> an entry level patch which has bindings to existing modules like GIC, SCU,
> TWD, PL011 UART. This also adds a new SPI device AB4500 (odler name STW4500)
> which uses ARM pl022 bus driver.
>
> There are similarly numbered platforms will appear in the near future bearing
> ux500 naming scheme, and hence this patch set has this name for the first
> U8500 platform. This is v3 patch re-based to linux-2.6.32-rc3, and fixed most
> of the review comments. For the patch 7/7 to work on hardware, get the
> patch 5741 from Russell's patch tracking system.
>
> srinidhi kasagar (7):
> [ARM]: U8500 register definitions
> [ARM]: U8500 clock framework
> [ARM]: U8500 core machine support
> [ARM]: U8500 Makefile.boot
> [ARM]: U8500 integrate to ARM architecture
> [ARM]: adds AB4500 as pl022 device
> mfd: add AB4500 SPI used in U8500
>
> arch/arm/Kconfig | 19 ++-
> arch/arm/Makefile | 1 +
> arch/arm/mach-ux500/Kconfig | 15 ++
> arch/arm/mach-ux500/Makefile | 8 +
> .../{mach-footbridge => mach-ux500}/Makefile.boot | 0
> arch/arm/mach-ux500/board-mop500.c | 146 +++++++++++
> arch/arm/mach-ux500/clock.c | 95 +++++++
> arch/arm/mach-ux500/cpu-u8500.c | 78 ++++++
> arch/arm/mach-ux500/headsmp.S | 38 +++
> .../include/mach/clkdev.h | 0
> arch/arm/mach-ux500/include/mach/debug-macro.S | 19 ++
> arch/arm/mach-ux500/include/mach/entry-macro.S | 89 +++++++
> arch/arm/mach-ux500/include/mach/hardware.h | 129 ++++++++++
> arch/arm/mach-ux500/include/mach/io.h | 22 ++
> arch/arm/mach-ux500/include/mach/irqs.h | 71 ++++++
> arch/arm/mach-ux500/include/mach/memory.h | 18 ++
> arch/arm/mach-ux500/include/mach/mtu.h | 53 ++++
> arch/arm/mach-ux500/include/mach/setup.h | 22 ++
> arch/arm/mach-ux500/include/mach/smp.h | 32 +++
> arch/arm/mach-ux500/include/mach/system.h | 25 ++
> arch/arm/mach-ux500/include/mach/timex.h | 6 +
> arch/arm/mach-ux500/include/mach/uncompress.h | 58 +++++
> arch/arm/mach-ux500/include/mach/vmalloc.h | 18 ++
> arch/arm/mach-ux500/localtimer.c | 28 ++
> arch/arm/mach-ux500/platsmp.c | 186 ++++++++++++++
> arch/arm/mach-ux500/timer.c | 163 ++++++++++++
> drivers/mfd/Kconfig | 10 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/ab4500-core.c | 207 +++++++++++++++
> include/linux/mfd/ab4500.h | 262 ++++++++++++++++++++
> 30 files changed, 1815 insertions(+), 4 deletions(-)
> create mode 100644 arch/arm/mach-ux500/Kconfig
> create mode 100644 arch/arm/mach-ux500/Makefile
> copy arch/arm/{mach-footbridge => mach-ux500}/Makefile.boot (100%)
> create mode 100644 arch/arm/mach-ux500/board-mop500.c
> create mode 100644 arch/arm/mach-ux500/clock.c
> create mode 100644 arch/arm/mach-ux500/cpu-u8500.c
> create mode 100644 arch/arm/mach-ux500/headsmp.S
> copy arch/arm/{mach-bcmring => mach-ux500}/include/mach/clkdev.h (100%)
> create mode 100644 arch/arm/mach-ux500/include/mach/debug-macro.S
> create mode 100644 arch/arm/mach-ux500/include/mach/entry-macro.S
> create mode 100644 arch/arm/mach-ux500/include/mach/hardware.h
> create mode 100644 arch/arm/mach-ux500/include/mach/io.h
> create mode 100644 arch/arm/mach-ux500/include/mach/irqs.h
> create mode 100644 arch/arm/mach-ux500/include/mach/memory.h
> create mode 100644 arch/arm/mach-ux500/include/mach/mtu.h
> create mode 100644 arch/arm/mach-ux500/include/mach/setup.h
> create mode 100644 arch/arm/mach-ux500/include/mach/smp.h
> create mode 100644 arch/arm/mach-ux500/include/mach/system.h
> create mode 100644 arch/arm/mach-ux500/include/mach/timex.h
> create mode 100644 arch/arm/mach-ux500/include/mach/uncompress.h
> create mode 100644 arch/arm/mach-ux500/include/mach/vmalloc.h
> create mode 100644 arch/arm/mach-ux500/localtimer.c
> create mode 100644 arch/arm/mach-ux500/platsmp.c
> create mode 100644 arch/arm/mach-ux500/timer.c
> create mode 100755 drivers/mfd/ab4500-core.c
> create mode 100644 include/linux/mfd/ab4500.h
>
>
prev parent reply other threads:[~2009-10-14 22:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-11 22:26 [PATCH v3 0/8] [ARM] ST-Ericsson's U8500 SMP platform, a new patch set srinidhi kasagar
2009-10-11 22:27 ` [PATCH v3 1/7] [ARM]: U8500 register definitions srinidhi kasagar
2009-10-17 14:31 ` Jean-Christophe PLAGNIOL-VILLARD
2009-10-14 22:17 ` srinidhi kasagar [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1255558653.21542.426.camel@vinay-desktop \
--to=srinidhi.kasagar@stericsson.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).