From: shinel@foxmail.com (Shine Liu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] ARM:S3C2440: MINI2440 Remove some improper __initdata qualifiers
Date: Thu, 19 Nov 2009 14:53:06 +0800 [thread overview]
Message-ID: <1258613586.2676.77.camel@shinel> (raw)
In-Reply-To: <200910211129.26044.jbe@pengutronix.de>
Hi, Ben
I resend this patch has been posted to linux-arm-kernel last month.
Orignal mail refer http://www.spinics.net/lists/arm-kernel/msg75741.html
Best Regards,
Shine
Signed-off-by: Michel Pollet <buserror@gmail.com>
Signed-off-by: Shine Liu <liuxian@redflag-linux.com>
------------------------------------------------------
--- a/arch/arm/mach-s3c2440/mach-mini2440.c 2009-10-21 10:18:52.000000000 +0800
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c 2009-10-21 21:29:44.000000000 +0800
@@ -61,7 +61,7 @@
#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300)
-static struct map_desc mini2440_iodesc[] __initdata = {
+static struct map_desc mini2440_iodesc[] = {
/* nothing to declare, move along */
};
@@ -233,7 +233,7 @@
/* MMC/SD */
-static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
+static struct s3c24xx_mci_pdata mini2440_mmc_cfg = {
.gpio_detect = S3C2410_GPG(8),
.gpio_wprotect = S3C2410_GPH(8),
.set_power = NULL,
@@ -242,7 +242,7 @@
/* NAND Flash on MINI2440 board */
-static struct mtd_partition mini2440_default_nand_part[] __initdata = {
+static struct mtd_partition mini2440_default_nand_part[] = {
[0] = {
.name = "u-boot",
.size = SZ_256K,
@@ -267,7 +267,7 @@
},
};
-static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
+static struct s3c2410_nand_set mini2440_nand_sets[] = {
[0] = {
.name = "nand",
.nr_chips = 1,
@@ -277,7 +277,7 @@
},
};
-static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
+static struct s3c2410_platform_nand mini2440_nand_info = {
.tacls = 0,
.twrph0 = 25,
.twrph1 = 15,
@@ -288,7 +288,7 @@
/* DM9000AEP 10/100 ethernet controller */
-static struct resource mini2440_dm9k_resource[] __initdata = {
+static struct resource mini2440_dm9k_resource[] = {
[0] = {
.start = MACH_MINI2440_DM9K_BASE,
.end = MACH_MINI2440_DM9K_BASE + 3,
@@ -310,11 +310,11 @@
* The DM9000 has no eeprom, and it's MAC address is set by
* the bootloader before starting the kernel.
*/
-static struct dm9000_plat_data mini2440_dm9k_pdata __initdata = {
+static struct dm9000_plat_data mini2440_dm9k_pdata = {
.flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
};
-static struct platform_device mini2440_device_eth __initdata = {
+static struct platform_device mini2440_device_eth = {
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(mini2440_dm9k_resource),
@@ -341,7 +341,7 @@
* | | +----+ +----+
* .....
*/
-static struct gpio_keys_button mini2440_buttons[] __initdata = {
+static struct gpio_keys_button mini2440_buttons[] = {
{
.gpio = S3C2410_GPG(0), /* K1 */
.code = KEY_F1,
@@ -384,12 +384,12 @@
#endif
};
-static struct gpio_keys_platform_data mini2440_button_data __initdata = {
+static struct gpio_keys_platform_data mini2440_button_data = {
.buttons = mini2440_buttons,
.nbuttons = ARRAY_SIZE(mini2440_buttons),
};
-static struct platform_device mini2440_button_device __initdata = {
+static struct platform_device mini2440_button_device = {
.name = "gpio-keys",
.id = -1,
.dev = {
@@ -399,41 +399,41 @@
/* LEDS */
-static struct s3c24xx_led_platdata mini2440_led1_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led1_pdata = {
.name = "led1",
.gpio = S3C2410_GPB(5),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "heartbeat",
};
-static struct s3c24xx_led_platdata mini2440_led2_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led2_pdata = {
.name = "led2",
.gpio = S3C2410_GPB(6),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "nand-disk",
};
-static struct s3c24xx_led_platdata mini2440_led3_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led3_pdata = {
.name = "led3",
.gpio = S3C2410_GPB(7),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "mmc0",
};
-static struct s3c24xx_led_platdata mini2440_led4_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led4_pdata = {
.name = "led4",
.gpio = S3C2410_GPB(8),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "",
};
-static struct s3c24xx_led_platdata mini2440_led_backlight_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = {
.name = "backlight",
.gpio = S3C2410_GPG(4),
.def_trigger = "backlight",
};
-static struct platform_device mini2440_led1 __initdata = {
+static struct platform_device mini2440_led1 = {
.name = "s3c24xx_led",
.id = 1,
.dev = {
@@ -441,7 +441,7 @@
},
};
-static struct platform_device mini2440_led2 __initdata = {
+static struct platform_device mini2440_led2 = {
.name = "s3c24xx_led",
.id = 2,
.dev = {
@@ -449,7 +449,7 @@
},
};
-static struct platform_device mini2440_led3 __initdata = {
+static struct platform_device mini2440_led3 = {
.name = "s3c24xx_led",
.id = 3,
.dev = {
@@ -457,7 +457,7 @@
},
};
-static struct platform_device mini2440_led4 __initdata = {
+static struct platform_device mini2440_led4 = {
.name = "s3c24xx_led",
.id = 4,
.dev = {
@@ -465,7 +465,7 @@
},
};
-static struct platform_device mini2440_led_backlight __initdata = {
+static struct platform_device mini2440_led_backlight = {
.name = "s3c24xx_led",
.id = 5,
.dev = {
@@ -475,14 +475,14 @@
/* AUDIO */
-static struct s3c24xx_uda134x_platform_data mini2440_audio_pins __initdata = {
+static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = {
.l3_clk = S3C2410_GPB(4),
.l3_mode = S3C2410_GPB(2),
.l3_data = S3C2410_GPB(3),
.model = UDA134X_UDA1341
};
-static struct platform_device mini2440_audio __initdata = {
+static struct platform_device mini2440_audio = {
.name = "s3c24xx_uda134x",
.id = 0,
.dev = {
@@ -498,7 +498,7 @@
.page_size = 16,
};
-static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
+static struct i2c_board_info mini2440_i2c_devs[] = {
{
I2C_BOARD_INFO("24c08", 0x50),
.platform_data = &at24c08,
prev parent reply other threads:[~2009-11-19 6:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-21 3:33 [PATCH] ARM:S3C2440: MINI2440 Remove some improper __initdata qualifiers Shine Liu
2009-10-21 9:29 ` Juergen Beisert
2009-10-21 10:13 ` Shine Liu
2009-10-21 14:13 ` [PATCH v2] " Shine Liu
2009-11-19 6:53 ` Shine Liu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1258613586.2676.77.camel@shinel \
--to=shinel@foxmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).