* [[clock v2]] ARM: SAMSUNG: Move <plat/clock.h> to plat-samsung
2009-12-08 2:07 Samsung clock updates v2 Ben Dooks
@ 2009-12-08 2:07 ` Ben Dooks
2009-12-08 2:07 ` [[clock v2]] ARM: S3C64XX: Cleanup common init code in s3c6400-clock.c Ben Dooks
` (6 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Ben Dooks @ 2009-12-08 2:07 UTC (permalink / raw)
To: linux-arm-kernel
Move the <plat/clock.h> header to plat-samsung where it can be used by all
the platforms, and readies it for the next round of clock updates where
the clock code will be amalgamated.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/plat-s3c/include/plat/clock.h | 89 ----------------------------
arch/arm/plat-samsung/include/plat/clock.h | 89 ++++++++++++++++++++++++++++
2 files changed, 89 insertions(+), 89 deletions(-)
delete mode 100644 arch/arm/plat-s3c/include/plat/clock.h
create mode 100644 arch/arm/plat-samsung/include/plat/clock.h
diff --git a/arch/arm/plat-s3c/include/plat/clock.h b/arch/arm/plat-s3c/include/plat/clock.h
deleted file mode 100644
index d86af84..0000000
--- a/arch/arm/plat-s3c/include/plat/clock.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/clock.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * http://www.simtec.co.uk/products/SWLINUX/
- * Written by Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/spinlock.h>
-
-struct clk {
- struct list_head list;
- struct module *owner;
- struct clk *parent;
- const char *name;
- int id;
- int usage;
- unsigned long rate;
- unsigned long ctrlbit;
-
- int (*enable)(struct clk *, int enable);
- int (*set_rate)(struct clk *c, unsigned long rate);
- unsigned long (*get_rate)(struct clk *c);
- unsigned long (*round_rate)(struct clk *c, unsigned long rate);
- int (*set_parent)(struct clk *c, struct clk *parent);
-};
-
-/* other clocks which may be registered by board support */
-
-extern struct clk s3c24xx_dclk0;
-extern struct clk s3c24xx_dclk1;
-extern struct clk s3c24xx_clkout0;
-extern struct clk s3c24xx_clkout1;
-extern struct clk s3c24xx_uclk;
-
-extern struct clk clk_usb_bus;
-
-/* core clock support */
-
-extern struct clk clk_f;
-extern struct clk clk_h;
-extern struct clk clk_p;
-extern struct clk clk_mpll;
-extern struct clk clk_upll;
-extern struct clk clk_epll;
-extern struct clk clk_xtal;
-extern struct clk clk_ext;
-
-/* S3C64XX specific clocks */
-extern struct clk clk_h2;
-extern struct clk clk_27m;
-extern struct clk clk_48m;
-
-/* exports for arch/arm/mach-s3c2410
- *
- * Please DO NOT use these outside of arch/arm/mach-s3c2410
-*/
-
-extern spinlock_t clocks_lock;
-
-extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
-
-extern int s3c24xx_register_clock(struct clk *clk);
-extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
-
-extern int s3c24xx_register_baseclocks(unsigned long xtal);
-
-extern void s3c64xx_register_clocks(void);
-
-extern void s3c24xx_setup_clocks(unsigned long fclk,
- unsigned long hclk,
- unsigned long pclk);
-
-extern void s3c2410_setup_clocks(void);
-extern void s3c2412_setup_clocks(void);
-extern void s3c244x_setup_clocks(void);
-extern void s3c2443_setup_clocks(void);
-
-/* S3C64XX specific functions and clocks */
-
-extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable);
-
-/* Init for pwm clock code */
-
-extern void s3c_pwmclk_init(void);
-
diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
new file mode 100644
index 0000000..d86af84
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -0,0 +1,89 @@
+/* linux/arch/arm/plat-s3c/include/plat/clock.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * http://www.simtec.co.uk/products/SWLINUX/
+ * Written by Ben Dooks, <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/spinlock.h>
+
+struct clk {
+ struct list_head list;
+ struct module *owner;
+ struct clk *parent;
+ const char *name;
+ int id;
+ int usage;
+ unsigned long rate;
+ unsigned long ctrlbit;
+
+ int (*enable)(struct clk *, int enable);
+ int (*set_rate)(struct clk *c, unsigned long rate);
+ unsigned long (*get_rate)(struct clk *c);
+ unsigned long (*round_rate)(struct clk *c, unsigned long rate);
+ int (*set_parent)(struct clk *c, struct clk *parent);
+};
+
+/* other clocks which may be registered by board support */
+
+extern struct clk s3c24xx_dclk0;
+extern struct clk s3c24xx_dclk1;
+extern struct clk s3c24xx_clkout0;
+extern struct clk s3c24xx_clkout1;
+extern struct clk s3c24xx_uclk;
+
+extern struct clk clk_usb_bus;
+
+/* core clock support */
+
+extern struct clk clk_f;
+extern struct clk clk_h;
+extern struct clk clk_p;
+extern struct clk clk_mpll;
+extern struct clk clk_upll;
+extern struct clk clk_epll;
+extern struct clk clk_xtal;
+extern struct clk clk_ext;
+
+/* S3C64XX specific clocks */
+extern struct clk clk_h2;
+extern struct clk clk_27m;
+extern struct clk clk_48m;
+
+/* exports for arch/arm/mach-s3c2410
+ *
+ * Please DO NOT use these outside of arch/arm/mach-s3c2410
+*/
+
+extern spinlock_t clocks_lock;
+
+extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
+
+extern int s3c24xx_register_clock(struct clk *clk);
+extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
+
+extern int s3c24xx_register_baseclocks(unsigned long xtal);
+
+extern void s3c64xx_register_clocks(void);
+
+extern void s3c24xx_setup_clocks(unsigned long fclk,
+ unsigned long hclk,
+ unsigned long pclk);
+
+extern void s3c2410_setup_clocks(void);
+extern void s3c2412_setup_clocks(void);
+extern void s3c244x_setup_clocks(void);
+extern void s3c2443_setup_clocks(void);
+
+/* S3C64XX specific functions and clocks */
+
+extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable);
+
+/* Init for pwm clock code */
+
+extern void s3c_pwmclk_init(void);
+
--
1.5.6.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [[clock v2]] ARM: S3C64XX: Cleanup common init code in s3c6400-clock.c
2009-12-08 2:07 Samsung clock updates v2 Ben Dooks
2009-12-08 2:07 ` [[clock v2]] ARM: SAMSUNG: Move <plat/clock.h> to plat-samsung Ben Dooks
@ 2009-12-08 2:07 ` Ben Dooks
2009-12-08 2:07 ` [[clock v2]] ARM: S3C64XX: Compress s3c6400-clock.c code Ben Dooks
` (5 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Ben Dooks @ 2009-12-08 2:07 UTC (permalink / raw)
To: linux-arm-kernel
Remove the four fields from clksrc_clk.clk which are always the same
and init them when the clock is registered. This helps remove the amount
of repeated code.
This is a re-work of Harald Welte's clock changes for the latest kernel.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/plat-s3c64xx/s3c6400-clock.c | 49 +++-----------------------------
1 files changed, 5 insertions(+), 44 deletions(-)
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 6ffa21e..5882470 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -364,10 +364,6 @@ static struct clksrc_clk clk_mmc0 = {
.id = 0,
.ctrlbit = S3C_CLKCON_SCLK_MMC0,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_MMC0_SHIFT,
.mask = S3C6400_CLKSRC_MMC0_MASK,
@@ -382,10 +378,6 @@ static struct clksrc_clk clk_mmc1 = {
.id = 1,
.ctrlbit = S3C_CLKCON_SCLK_MMC1,
.enable = s3c64xx_sclk_ctrl,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .set_parent = s3c64xx_setparent_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_MMC1_SHIFT,
.mask = S3C6400_CLKSRC_MMC1_MASK,
@@ -400,10 +392,6 @@ static struct clksrc_clk clk_mmc2 = {
.id = 2,
.ctrlbit = S3C_CLKCON_SCLK_MMC2,
.enable = s3c64xx_sclk_ctrl,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .set_parent = s3c64xx_setparent_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_MMC2_SHIFT,
.mask = S3C6400_CLKSRC_MMC2_MASK,
@@ -418,10 +406,6 @@ static struct clksrc_clk clk_usbhost = {
.id = -1,
.ctrlbit = S3C_CLKCON_SCLK_UHOST,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_UHOST_SHIFT,
.mask = S3C6400_CLKSRC_UHOST_MASK,
@@ -436,10 +420,6 @@ static struct clksrc_clk clk_uart_uclk1 = {
.id = -1,
.ctrlbit = S3C_CLKCON_SCLK_UART,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_UART_SHIFT,
.mask = S3C6400_CLKSRC_UART_MASK,
@@ -456,10 +436,6 @@ static struct clksrc_clk clk_spi0 = {
.id = 0,
.ctrlbit = S3C_CLKCON_SCLK_SPI0,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_SPI0_SHIFT,
.mask = S3C6400_CLKSRC_SPI0_MASK,
@@ -474,10 +450,6 @@ static struct clksrc_clk clk_spi1 = {
.id = 1,
.ctrlbit = S3C_CLKCON_SCLK_SPI1,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_SPI1_SHIFT,
.mask = S3C6400_CLKSRC_SPI1_MASK,
@@ -520,10 +492,6 @@ static struct clksrc_clk clk_audio0 = {
.id = 0,
.ctrlbit = S3C_CLKCON_SCLK_AUDIO0,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_AUDIO0_SHIFT,
.mask = S3C6400_CLKSRC_AUDIO0_MASK,
@@ -551,10 +519,6 @@ static struct clksrc_clk clk_audio1 = {
.id = 1,
.ctrlbit = S3C_CLKCON_SCLK_AUDIO1,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_AUDIO1_SHIFT,
.mask = S3C6400_CLKSRC_AUDIO1_MASK,
@@ -569,10 +533,6 @@ static struct clksrc_clk clk_irda = {
.id = 0,
.ctrlbit = S3C_CLKCON_SCLK_IRDA,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = S3C6400_CLKSRC_IRDA_SHIFT,
.mask = S3C6400_CLKSRC_IRDA_MASK,
@@ -596,10 +556,6 @@ static struct clksrc_clk clk_camif = {
.id = -1,
.ctrlbit = S3C_CLKCON_SCLK_CAM,
.enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
},
.shift = 0,
.mask = 0,
@@ -641,6 +597,11 @@ static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
return;
}
+ clk->clk.get_rate = s3c64xx_getrate_clksrc;
+ clk->clk.set_rate = s3c64xx_setrate_clksrc;
+ clk->clk.set_parent = s3c64xx_setparent_clksrc;
+ clk->clk.round_rate = s3c64xx_roundrate_clksrc;
+
clk->clk.parent = srcs->sources[clksrc];
printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
--
1.5.6.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [[clock v2]] ARM: S3C64XX: Compress s3c6400-clock.c code
2009-12-08 2:07 Samsung clock updates v2 Ben Dooks
2009-12-08 2:07 ` [[clock v2]] ARM: SAMSUNG: Move <plat/clock.h> to plat-samsung Ben Dooks
2009-12-08 2:07 ` [[clock v2]] ARM: S3C64XX: Cleanup common init code in s3c6400-clock.c Ben Dooks
@ 2009-12-08 2:07 ` Ben Dooks
2009-12-08 2:07 ` [[clock v2]] ARM: SAMSUNG: Add core clock implementation for clksrc based clocks Ben Dooks
` (4 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Ben Dooks @ 2009-12-08 2:07 UTC (permalink / raw)
To: linux-arm-kernel
The individually named clocks are all static to the code
and thus can be compressed into a single array and then
the array can be referenced. This removes the need for
a seperate array of pointers to clocks.
Fix a minor problem of re-initialising the pointers in
s3c6400_set_clksrc() as this is also called by the cpufreq
code. Move these initialisations to the code that does the
registration.
Based on Harald Welte's original clock changes patch.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/plat-s3c64xx/s3c6400-clock.c | 334 +++++++++++++++------------------
1 files changed, 154 insertions(+), 180 deletions(-)
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 5882470..a07e5c9 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -259,7 +259,6 @@ static struct clk_sources clkset_uhost = {
.nr_sources = ARRAY_SIZE(clkset_uhost_list),
};
-
/* The peripheral clocks are all controlled via clocksource followed
* by an optional divider and gate stage. We currently roll this into
* one clock which hides the intermediate clock from the mux.
@@ -358,105 +357,7 @@ static unsigned long s3c64xx_roundrate_clksrc(struct clk *clk,
return rate;
}
-static struct clksrc_clk clk_mmc0 = {
- .clk = {
- .name = "mmc_bus",
- .id = 0,
- .ctrlbit = S3C_CLKCON_SCLK_MMC0,
- .enable = s3c64xx_sclk_ctrl,
- },
- .shift = S3C6400_CLKSRC_MMC0_SHIFT,
- .mask = S3C6400_CLKSRC_MMC0_MASK,
- .sources = &clkset_spi_mmc,
- .divider_shift = S3C6400_CLKDIV1_MMC0_SHIFT,
- .reg_divider = S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_mmc1 = {
- .clk = {
- .name = "mmc_bus",
- .id = 1,
- .ctrlbit = S3C_CLKCON_SCLK_MMC1,
- .enable = s3c64xx_sclk_ctrl,
- },
- .shift = S3C6400_CLKSRC_MMC1_SHIFT,
- .mask = S3C6400_CLKSRC_MMC1_MASK,
- .sources = &clkset_spi_mmc,
- .divider_shift = S3C6400_CLKDIV1_MMC1_SHIFT,
- .reg_divider = S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_mmc2 = {
- .clk = {
- .name = "mmc_bus",
- .id = 2,
- .ctrlbit = S3C_CLKCON_SCLK_MMC2,
- .enable = s3c64xx_sclk_ctrl,
- },
- .shift = S3C6400_CLKSRC_MMC2_SHIFT,
- .mask = S3C6400_CLKSRC_MMC2_MASK,
- .sources = &clkset_spi_mmc,
- .divider_shift = S3C6400_CLKDIV1_MMC2_SHIFT,
- .reg_divider = S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_usbhost = {
- .clk = {
- .name = "usb-bus-host",
- .id = -1,
- .ctrlbit = S3C_CLKCON_SCLK_UHOST,
- .enable = s3c64xx_sclk_ctrl,
- },
- .shift = S3C6400_CLKSRC_UHOST_SHIFT,
- .mask = S3C6400_CLKSRC_UHOST_MASK,
- .sources = &clkset_uhost,
- .divider_shift = S3C6400_CLKDIV1_UHOST_SHIFT,
- .reg_divider = S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_uart_uclk1 = {
- .clk = {
- .name = "uclk1",
- .id = -1,
- .ctrlbit = S3C_CLKCON_SCLK_UART,
- .enable = s3c64xx_sclk_ctrl,
- },
- .shift = S3C6400_CLKSRC_UART_SHIFT,
- .mask = S3C6400_CLKSRC_UART_MASK,
- .sources = &clkset_uart,
- .divider_shift = S3C6400_CLKDIV2_UART_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
-};
-
-/* Where does UCLK0 come from? */
-
-static struct clksrc_clk clk_spi0 = {
- .clk = {
- .name = "spi-bus",
- .id = 0,
- .ctrlbit = S3C_CLKCON_SCLK_SPI0,
- .enable = s3c64xx_sclk_ctrl,
- },
- .shift = S3C6400_CLKSRC_SPI0_SHIFT,
- .mask = S3C6400_CLKSRC_SPI0_MASK,
- .sources = &clkset_spi_mmc,
- .divider_shift = S3C6400_CLKDIV2_SPI0_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
-};
-
-static struct clksrc_clk clk_spi1 = {
- .clk = {
- .name = "spi-bus",
- .id = 1,
- .ctrlbit = S3C_CLKCON_SCLK_SPI1,
- .enable = s3c64xx_sclk_ctrl,
- },
- .shift = S3C6400_CLKSRC_SPI1_SHIFT,
- .mask = S3C6400_CLKSRC_SPI1_MASK,
- .sources = &clkset_spi_mmc,
- .divider_shift = S3C6400_CLKDIV2_SPI1_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
-};
+/* clocks that feed other parts of the clock source tree */
static struct clk clk_iis_cd0 = {
.name = "iis_cdclk0",
@@ -486,20 +387,6 @@ static struct clk_sources clkset_audio0 = {
.nr_sources = ARRAY_SIZE(clkset_audio0_list),
};
-static struct clksrc_clk clk_audio0 = {
- .clk = {
- .name = "audio-bus",
- .id = 0,
- .ctrlbit = S3C_CLKCON_SCLK_AUDIO0,
- .enable = s3c64xx_sclk_ctrl,
- },
- .shift = S3C6400_CLKSRC_AUDIO0_SHIFT,
- .mask = S3C6400_CLKSRC_AUDIO0_MASK,
- .sources = &clkset_audio0,
- .divider_shift = S3C6400_CLKDIV2_AUDIO0_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
-};
-
static struct clk *clkset_audio1_list[] = {
[0] = &clk_mout_epll.clk,
[1] = &clk_dout_mpll,
@@ -513,34 +400,6 @@ static struct clk_sources clkset_audio1 = {
.nr_sources = ARRAY_SIZE(clkset_audio1_list),
};
-static struct clksrc_clk clk_audio1 = {
- .clk = {
- .name = "audio-bus",
- .id = 1,
- .ctrlbit = S3C_CLKCON_SCLK_AUDIO1,
- .enable = s3c64xx_sclk_ctrl,
- },
- .shift = S3C6400_CLKSRC_AUDIO1_SHIFT,
- .mask = S3C6400_CLKSRC_AUDIO1_MASK,
- .sources = &clkset_audio1,
- .divider_shift = S3C6400_CLKDIV2_AUDIO1_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
-};
-
-static struct clksrc_clk clk_irda = {
- .clk = {
- .name = "irda-bus",
- .id = 0,
- .ctrlbit = S3C_CLKCON_SCLK_IRDA,
- .enable = s3c64xx_sclk_ctrl,
- },
- .shift = S3C6400_CLKSRC_IRDA_SHIFT,
- .mask = S3C6400_CLKSRC_IRDA_MASK,
- .sources = &clkset_irda,
- .divider_shift = S3C6400_CLKDIV2_IRDA_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
-};
-
static struct clk *clkset_camif_list[] = {
&clk_h2,
};
@@ -550,18 +409,141 @@ static struct clk_sources clkset_camif = {
.nr_sources = ARRAY_SIZE(clkset_camif_list),
};
-static struct clksrc_clk clk_camif = {
- .clk = {
- .name = "camera",
- .id = -1,
- .ctrlbit = S3C_CLKCON_SCLK_CAM,
- .enable = s3c64xx_sclk_ctrl,
+static struct clksrc_clk clksrcs[] = {
+ {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 0,
+ .ctrlbit = S3C_CLKCON_SCLK_MMC0,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .shift = S3C6400_CLKSRC_MMC0_SHIFT,
+ .mask = S3C6400_CLKSRC_MMC0_MASK,
+ .sources = &clkset_spi_mmc,
+ .divider_shift = S3C6400_CLKDIV1_MMC0_SHIFT,
+ .reg_divider = S3C_CLK_DIV1,
+ }, {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 1,
+ .ctrlbit = S3C_CLKCON_SCLK_MMC1,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .shift = S3C6400_CLKSRC_MMC1_SHIFT,
+ .mask = S3C6400_CLKSRC_MMC1_MASK,
+ .sources = &clkset_spi_mmc,
+ .divider_shift = S3C6400_CLKDIV1_MMC1_SHIFT,
+ .reg_divider = S3C_CLK_DIV1,
+ }, {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 2,
+ .ctrlbit = S3C_CLKCON_SCLK_MMC2,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .shift = S3C6400_CLKSRC_MMC2_SHIFT,
+ .mask = S3C6400_CLKSRC_MMC2_MASK,
+ .sources = &clkset_spi_mmc,
+ .divider_shift = S3C6400_CLKDIV1_MMC2_SHIFT,
+ .reg_divider = S3C_CLK_DIV1,
+ }, {
+ .clk = {
+ .name = "usb-bus-host",
+ .id = -1,
+ .ctrlbit = S3C_CLKCON_SCLK_UHOST,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .shift = S3C6400_CLKSRC_UHOST_SHIFT,
+ .mask = S3C6400_CLKSRC_UHOST_MASK,
+ .sources = &clkset_uhost,
+ .divider_shift = S3C6400_CLKDIV1_UHOST_SHIFT,
+ .reg_divider = S3C_CLK_DIV1,
+ }, {
+ .clk = {
+ .name = "uclk1",
+ .id = -1,
+ .ctrlbit = S3C_CLKCON_SCLK_UART,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .shift = S3C6400_CLKSRC_UART_SHIFT,
+ .mask = S3C6400_CLKSRC_UART_MASK,
+ .sources = &clkset_uart,
+ .divider_shift = S3C6400_CLKDIV2_UART_SHIFT,
+ .reg_divider = S3C_CLK_DIV2,
+ }, {
+/* Where does UCLK0 come from? */
+ .clk = {
+ .name = "spi-bus",
+ .id = 0,
+ .ctrlbit = S3C_CLKCON_SCLK_SPI0,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .shift = S3C6400_CLKSRC_SPI0_SHIFT,
+ .mask = S3C6400_CLKSRC_SPI0_MASK,
+ .sources = &clkset_spi_mmc,
+ .divider_shift = S3C6400_CLKDIV2_SPI0_SHIFT,
+ .reg_divider = S3C_CLK_DIV2,
+ }, {
+ .clk = {
+ .name = "spi-bus",
+ .id = 1,
+ .ctrlbit = S3C_CLKCON_SCLK_SPI1,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .shift = S3C6400_CLKSRC_SPI1_SHIFT,
+ .mask = S3C6400_CLKSRC_SPI1_MASK,
+ .sources = &clkset_spi_mmc,
+ .divider_shift = S3C6400_CLKDIV2_SPI1_SHIFT,
+ .reg_divider = S3C_CLK_DIV2,
+ }, {
+ .clk = {
+ .name = "audio-bus",
+ .id = 0,
+ .ctrlbit = S3C_CLKCON_SCLK_AUDIO0,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .shift = S3C6400_CLKSRC_AUDIO0_SHIFT,
+ .mask = S3C6400_CLKSRC_AUDIO0_MASK,
+ .sources = &clkset_audio0,
+ .divider_shift = S3C6400_CLKDIV2_AUDIO0_SHIFT,
+ .reg_divider = S3C_CLK_DIV2,
+ }, {
+ .clk = {
+ .name = "audio-bus",
+ .id = 1,
+ .ctrlbit = S3C_CLKCON_SCLK_AUDIO1,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .shift = S3C6400_CLKSRC_AUDIO1_SHIFT,
+ .mask = S3C6400_CLKSRC_AUDIO1_MASK,
+ .sources = &clkset_audio1,
+ .divider_shift = S3C6400_CLKDIV2_AUDIO1_SHIFT,
+ .reg_divider = S3C_CLK_DIV2,
+ }, {
+ .clk = {
+ .name = "irda-bus",
+ .id = 0,
+ .ctrlbit = S3C_CLKCON_SCLK_IRDA,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .shift = S3C6400_CLKSRC_IRDA_SHIFT,
+ .mask = S3C6400_CLKSRC_IRDA_MASK,
+ .sources = &clkset_irda,
+ .divider_shift = S3C6400_CLKDIV2_IRDA_SHIFT,
+ .reg_divider = S3C_CLK_DIV2,
+ }, {
+ .clk = {
+ .name = "camera",
+ .id = -1,
+ .ctrlbit = S3C_CLKCON_SCLK_CAM,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .shift = 0,
+ .mask = 0,
+ .sources = &clkset_camif,
+ .divider_shift = S3C6400_CLKDIV0_CAM_SHIFT,
+ .reg_divider = S3C_CLK_DIV0,
},
- .shift = 0,
- .mask = 0,
- .sources = &clkset_camif,
- .divider_shift = S3C6400_CLKDIV0_CAM_SHIFT,
- .reg_divider = S3C_CLK_DIV0,
};
/* Clock initialisation code */
@@ -570,17 +552,6 @@ static struct clksrc_clk *init_parents[] = {
&clk_mout_apll,
&clk_mout_epll,
&clk_mout_mpll,
- &clk_mmc0,
- &clk_mmc1,
- &clk_mmc2,
- &clk_usbhost,
- &clk_uart_uclk1,
- &clk_spi0,
- &clk_spi1,
- &clk_audio0,
- &clk_audio1,
- &clk_irda,
- &clk_camif,
};
static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
@@ -597,11 +568,6 @@ static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
return;
}
- clk->clk.get_rate = s3c64xx_getrate_clksrc;
- clk->clk.set_rate = s3c64xx_setrate_clksrc;
- clk->clk.set_parent = s3c64xx_setparent_clksrc;
- clk->clk.round_rate = s3c64xx_roundrate_clksrc;
-
clk->clk.parent = srcs->sources[clksrc];
printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
@@ -668,6 +634,9 @@ void __init_or_cpufreq s3c6400_setup_clocks(void)
for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
s3c6400_set_clksrc(init_parents[ptr]);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+ s3c6400_set_clksrc(&clksrcs[ptr]);
}
static struct clk *clks[] __initdata = {
@@ -679,17 +648,6 @@ static struct clk *clks[] __initdata = {
&clk_fout_epll,
&clk_mout_mpll.clk,
&clk_dout_mpll,
- &clk_mmc0.clk,
- &clk_mmc1.clk,
- &clk_mmc2.clk,
- &clk_usbhost.clk,
- &clk_uart_uclk1.clk,
- &clk_spi0.clk,
- &clk_spi1.clk,
- &clk_audio0.clk,
- &clk_audio1.clk,
- &clk_irda.clk,
- &clk_camif.clk,
&clk_arm,
};
@@ -722,6 +680,22 @@ void __init s3c6400_register_clocks(unsigned armclk_divlimit)
}
}
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) {
+ clkp = &clksrcs[ptr].clk;
+
+ /* all clksrc clocks have these */
+ clkp->get_rate = s3c64xx_getrate_clksrc;
+ clkp->set_rate = s3c64xx_setrate_clksrc;
+ clkp->set_parent = s3c64xx_setparent_clksrc;
+ clkp->round_rate = s3c64xx_roundrate_clksrc;
+
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ }
+
clk_mpll.parent = &clk_mout_mpll.clk;
clk_epll.parent = &clk_mout_epll.clk;
}
--
1.5.6.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [[clock v2]] ARM: SAMSUNG: Add core clock implementation for clksrc based clocks
2009-12-08 2:07 Samsung clock updates v2 Ben Dooks
` (2 preceding siblings ...)
2009-12-08 2:07 ` [[clock v2]] ARM: S3C64XX: Compress s3c6400-clock.c code Ben Dooks
@ 2009-12-08 2:07 ` Ben Dooks
2009-12-08 2:07 ` [[clock v2]] ARM: S3C64XX: Use new clock-clksrc.c code for clocks Ben Dooks
` (3 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Ben Dooks @ 2009-12-08 2:07 UTC (permalink / raw)
To: linux-arm-kernel
From: Harald Welte <laforge@gnumonks.org>
Add a core for the clksrc clock implementation, which is found in many of
the newer Samsung SoCs into plat-samsung.
Signed-off-by: Harald Welte <laforge@gnumonks.org>
[ben-linux at fluff.org: split from original patch to make change smaller]
[ben-linux at fluff.org: split clk and clksrc changes]
[ben-linux at fluff.org: moved to plat-samsung from plat-s3c]
[ben-linux at fluff.org: re-wrote headers after splits]
[ben-linux at fluff.org: added better documentation to headers]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/plat-samsung/Kconfig | 5 +
arch/arm/plat-samsung/Makefile | 1 +
arch/arm/plat-samsung/clock-clksrc.c | 177 +++++++++++++++++++++
arch/arm/plat-samsung/include/plat/clock-clksrc.h | 75 +++++++++
4 files changed, 258 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/plat-samsung/clock-clksrc.c
create mode 100644 arch/arm/plat-samsung/include/plat/clock-clksrc.h
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 486a0d6..e3ae684 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -13,5 +13,10 @@ config PLAT_SAMSUNG
if PLAT_SAMSUNG
+config SAMSUNG_CLKSRC
+ bool
+ help
+ Select the clock code for the clksrc implementation
+ used by newer systems such as the S3C64XX.
endif
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 4478b9f..ce736ce 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -9,3 +9,4 @@ obj-m :=
obj-n := dummy.o
obj- :=
+obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o
diff --git a/arch/arm/plat-samsung/clock-clksrc.c b/arch/arm/plat-samsung/clock-clksrc.c
new file mode 100644
index 0000000..5872f0b
--- /dev/null
+++ b/arch/arm/plat-samsung/clock-clksrc.c
@@ -0,0 +1,177 @@
+/* linux/arch/arm/plat-samsung/clock-clksrc.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/cpu-freq.h>
+
+static inline struct clksrc_clk *to_clksrc(struct clk *clk)
+{
+ return container_of(clk, struct clksrc_clk, clk);
+}
+
+static inline u32 bit_mask(u32 shift, u32 nr_bits)
+{
+ u32 mask = 0xffffffff >> (32 - nr_bits);
+
+ return mask << shift;
+}
+
+static unsigned long s3c_getrate_clksrc(struct clk *clk)
+{
+ struct clksrc_clk *sclk = to_clksrc(clk);
+ unsigned long rate = clk_get_rate(clk->parent);
+ u32 clkdiv = __raw_readl(sclk->reg_div.reg);
+ u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size);
+
+ clkdiv &= mask;
+ clkdiv >>= sclk->reg_div.shift;
+ clkdiv++;
+
+ rate /= clkdiv;
+ return rate;
+}
+
+static int s3c_setrate_clksrc(struct clk *clk, unsigned long rate)
+{
+ struct clksrc_clk *sclk = to_clksrc(clk);
+ void __iomem *reg = sclk->reg_div.reg;
+ unsigned int div;
+ u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size);
+ u32 val;
+
+ rate = clk_round_rate(clk, rate);
+ div = clk_get_rate(clk->parent) / rate;
+ if (div > 16)
+ return -EINVAL;
+
+ val = __raw_readl(reg);
+ val &= ~mask;
+ val |= (div - 1) << sclk->reg_div.shift;
+ __raw_writel(val, reg);
+
+ return 0;
+}
+
+static int s3c_setparent_clksrc(struct clk *clk, struct clk *parent)
+{
+ struct clksrc_clk *sclk = to_clksrc(clk);
+ struct clksrc_sources *srcs = sclk->sources;
+ u32 clksrc = __raw_readl(sclk->reg_src.reg);
+ u32 mask = bit_mask(sclk->reg_src.shift, sclk->reg_src.size);
+ int src_nr = -1;
+ int ptr;
+
+ for (ptr = 0; ptr < srcs->nr_sources; ptr++)
+ if (srcs->sources[ptr] == parent) {
+ src_nr = ptr;
+ break;
+ }
+
+ if (src_nr >= 0 && sclk->reg_src.reg) {
+ clk->parent = parent;
+
+ clksrc &= ~mask;
+ clksrc |= src_nr << sclk->reg_src.shift;
+
+ __raw_writel(clksrc, sclk->reg_src.reg);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static unsigned long s3c_roundrate_clksrc(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ int div;
+
+ if (rate >= parent_rate)
+ rate = parent_rate;
+ else {
+ div = parent_rate / rate;
+ if (parent_rate % rate)
+ div++;
+
+ if (div == 0)
+ div = 1;
+ if (div > 16)
+ div = 16;
+
+ rate = parent_rate / div;
+ }
+
+ return rate;
+}
+
+/* Clock initialisation code */
+
+void __init_or_cpufreq s3c_set_clksrc(struct clksrc_clk *clk)
+{
+ struct clksrc_sources *srcs = clk->sources;
+ u32 mask = bit_mask(clk->reg_src.shift, clk->reg_src.size);
+ u32 clksrc = 0;
+
+ if (clk->reg_src.reg)
+ clksrc = __raw_readl(clk->reg_src.reg);
+
+ clksrc &= mask;
+ clksrc >>= clk->reg_src.shift;
+
+ if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
+ printk(KERN_ERR "%s: bad source %d\n",
+ clk->clk.name, clksrc);
+ return;
+ }
+
+ clk->clk.parent = srcs->sources[clksrc];
+
+ printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
+ clk->clk.name, clk->clk.parent->name, clksrc,
+ clk_get_rate(&clk->clk));
+}
+
+void __init s3c_register_clksrc(struct clksrc_clk *clksrc, int size)
+{
+ int ret;
+
+ for (; size > 0; size--, clksrc++) {
+ /* fill in the default functions */
+ if (!clksrc->clk.set_parent)
+ clksrc->clk.set_parent = s3c_setparent_clksrc;
+ if (!clksrc->clk.get_rate)
+ clksrc->clk.get_rate = s3c_getrate_clksrc;
+ if (!clksrc->clk.set_rate)
+ clksrc->clk.set_rate = s3c_setrate_clksrc;
+ if (!clksrc->clk.round_rate)
+ clksrc->clk.round_rate = s3c_roundrate_clksrc;
+
+ s3c_set_clksrc(clksrc);
+
+ ret = s3c24xx_register_clock(&clksrc->clk);
+
+ if (ret < 0) {
+ printk(KERN_ERR "%s: failed to register %s (%d)\n",
+ __func__, clksrc->clk.name, ret);
+ }
+ }
+}
diff --git a/arch/arm/plat-samsung/include/plat/clock-clksrc.h b/arch/arm/plat-samsung/include/plat/clock-clksrc.h
new file mode 100644
index 0000000..283dfa0
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/clock-clksrc.h
@@ -0,0 +1,75 @@
+/* linux/arch/arm/plat-samsung/include/plat/clock-clksrc.h
+ *
+ * Parts taken from arch/arm/plat-s3c64xx/clock.c
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Copyright 2009 Ben Dooks <ben-linux@fluff.org>
+ * Copyright 2009 Harald Welte
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/**
+ * struct clksrc_sources - list of sources for a given clock
+ * @sources: array of pointers to clocks
+ * @nr_sources: The size of @sources
+ */
+struct clksrc_sources {
+ unsigned int nr_sources;
+ struct clk **sources;
+};
+
+/**
+ * struct clksrc_reg - register definition for clock control bits
+ * @reg: pointer to the register in virtual memory.
+ * @shift: the shift in bits to where the bitfield is.
+ * @size: the size in bits of the bitfield.
+ *
+ * This specifies the size and position of the bits we are interested
+ * in within the register specified by @reg.
+ */
+struct clksrc_reg {
+ void __iomem *reg;
+ unsigned short shift;
+ unsigned short size;
+};
+
+/**
+ * struct clksrc_clk - class of clock for newer style samsung devices.
+ * @clk: the standard clock representation
+ * @sources: the sources for this clock
+ * @reg_src: the register definition for selecting the clock's source
+ * @reg_div: the register definition for the clock's output divisor
+ *
+ * This clock implements the features required by the newer SoCs where
+ * the standard clock block provides an input mux and a post-mux divisor
+ * to provide the periperhal's clock.
+ *
+ * The array of @sources provides the mapping of mux position to the
+ * clock, and @reg_src shows the code where to modify to change the mux
+ * position. The @reg_div defines how to change the divider settings on
+ * the output.
+ */
+struct clksrc_clk {
+ struct clk clk;
+ struct clksrc_sources *sources;
+
+ struct clksrc_reg reg_src;
+ struct clksrc_reg reg_div;
+};
+
+extern void s3c_set_clksrc(struct clksrc_clk *clk);
+
+/**
+ * s3c_register_clksrc() register clocks from an array of clksrc clocks
+ * @srcs: The array of clocks to register
+ * @size: The size of the @srcs array.
+ *
+ * Initialise and register the array of clocks described by @srcs.
+ */
+extern void s3c_register_clksrc(struct clksrc_clk *srcs, int size);
--
1.5.6.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [[clock v2]] ARM: S3C64XX: Use new clock-clksrc.c code for clocks.
2009-12-08 2:07 Samsung clock updates v2 Ben Dooks
` (3 preceding siblings ...)
2009-12-08 2:07 ` [[clock v2]] ARM: SAMSUNG: Add core clock implementation for clksrc based clocks Ben Dooks
@ 2009-12-08 2:07 ` Ben Dooks
2009-12-08 2:07 ` [[clock v2]] ARM: S3C64XX: Remove unused clock definitions from clock header Ben Dooks
` (2 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Ben Dooks @ 2009-12-08 2:07 UTC (permalink / raw)
To: linux-arm-kernel
Move the s3c6400-clock.c implementation over to use the new common
plat-samsung based clock-clksrc.c.
Note, this does not delete the clocks definitions that are now unused
in the regs-clock.h to reduce the quantity of change in this commit.
Based on original patches by Harald Welte.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/plat-s3c64xx/Kconfig | 1 +
arch/arm/plat-s3c64xx/s3c6400-clock.c | 241 ++++++---------------------------
2 files changed, 40 insertions(+), 202 deletions(-)
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index bcfa778..f029697 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -15,6 +15,7 @@ config PLAT_S3C64XX
select ARM_VIC
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
+ select SAMSUNG_CLKSRC
select S3C_GPIO_TRACK
select S3C_GPIO_PULL_UPDOWN
select S3C_GPIO_CFG_S3C24XX
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index a07e5c9..adc2e0a 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -29,6 +29,7 @@
#include <plat/regs-clock.h>
#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
#include <plat/cpu.h>
#include <plat/pll.h>
@@ -47,22 +48,6 @@ static struct clk clk_ext_xtal_mux = {
#define clk_fout_mpll clk_mpll
-struct clk_sources {
- unsigned int nr_sources;
- struct clk **sources;
-};
-
-struct clksrc_clk {
- struct clk clk;
- unsigned int mask;
- unsigned int shift;
-
- struct clk_sources *sources;
-
- unsigned int divider_shift;
- void __iomem *reg_divider;
-};
-
static struct clk clk_fout_apll = {
.name = "fout_apll",
.id = -1,
@@ -73,7 +58,7 @@ static struct clk *clk_src_apll_list[] = {
[1] = &clk_fout_apll,
};
-static struct clk_sources clk_src_apll = {
+static struct clksrc_sources clk_src_apll = {
.sources = clk_src_apll_list,
.nr_sources = ARRAY_SIZE(clk_src_apll_list),
};
@@ -83,8 +68,7 @@ static struct clksrc_clk clk_mout_apll = {
.name = "mout_apll",
.id = -1,
},
- .shift = S3C6400_CLKSRC_APLL_MOUT_SHIFT,
- .mask = S3C6400_CLKSRC_APLL_MOUT,
+ .reg_src = { S3C_CLK_SRC, 0, 1 },
.sources = &clk_src_apll,
};
@@ -98,7 +82,7 @@ static struct clk *clk_src_epll_list[] = {
[1] = &clk_fout_epll,
};
-static struct clk_sources clk_src_epll = {
+static struct clksrc_sources clk_src_epll = {
.sources = clk_src_epll_list,
.nr_sources = ARRAY_SIZE(clk_src_epll_list),
};
@@ -108,8 +92,7 @@ static struct clksrc_clk clk_mout_epll = {
.name = "mout_epll",
.id = -1,
},
- .shift = S3C6400_CLKSRC_EPLL_MOUT_SHIFT,
- .mask = S3C6400_CLKSRC_EPLL_MOUT,
+ .reg_src = { S3C_CLK_SRC, 2, 1 },
.sources = &clk_src_epll,
};
@@ -118,7 +101,7 @@ static struct clk *clk_src_mpll_list[] = {
[1] = &clk_fout_mpll,
};
-static struct clk_sources clk_src_mpll = {
+static struct clksrc_sources clk_src_mpll = {
.sources = clk_src_mpll_list,
.nr_sources = ARRAY_SIZE(clk_src_mpll_list),
};
@@ -128,8 +111,7 @@ static struct clksrc_clk clk_mout_mpll = {
.name = "mout_mpll",
.id = -1,
},
- .shift = S3C6400_CLKSRC_MPLL_MOUT_SHIFT,
- .mask = S3C6400_CLKSRC_MPLL_MOUT,
+ .reg_src = { S3C_CLK_SRC, 1, 1 },
.sources = &clk_src_mpll,
};
@@ -218,7 +200,7 @@ static struct clk *clkset_spi_mmc_list[] = {
&clk_27m,
};
-static struct clk_sources clkset_spi_mmc = {
+static struct clksrc_sources clkset_spi_mmc = {
.sources = clkset_spi_mmc_list,
.nr_sources = ARRAY_SIZE(clkset_spi_mmc_list),
};
@@ -230,7 +212,7 @@ static struct clk *clkset_irda_list[] = {
&clk_27m,
};
-static struct clk_sources clkset_irda = {
+static struct clksrc_sources clkset_irda = {
.sources = clkset_irda_list,
.nr_sources = ARRAY_SIZE(clkset_irda_list),
};
@@ -242,7 +224,7 @@ static struct clk *clkset_uart_list[] = {
NULL
};
-static struct clk_sources clkset_uart = {
+static struct clksrc_sources clkset_uart = {
.sources = clkset_uart_list,
.nr_sources = ARRAY_SIZE(clkset_uart_list),
};
@@ -254,7 +236,7 @@ static struct clk *clkset_uhost_list[] = {
&clk_fin_epll,
};
-static struct clk_sources clkset_uhost = {
+static struct clksrc_sources clkset_uhost = {
.sources = clkset_uhost_list,
.nr_sources = ARRAY_SIZE(clkset_uhost_list),
};
@@ -269,94 +251,6 @@ static struct clk_sources clkset_uhost = {
* have a common parent divisor so are not included here.
*/
-static inline struct clksrc_clk *to_clksrc(struct clk *clk)
-{
- return container_of(clk, struct clksrc_clk, clk);
-}
-
-static unsigned long s3c64xx_getrate_clksrc(struct clk *clk)
-{
- struct clksrc_clk *sclk = to_clksrc(clk);
- unsigned long rate = clk_get_rate(clk->parent);
- u32 clkdiv = __raw_readl(sclk->reg_divider);
-
- clkdiv >>= sclk->divider_shift;
- clkdiv &= 0xf;
- clkdiv++;
-
- rate /= clkdiv;
- return rate;
-}
-
-static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate)
-{
- struct clksrc_clk *sclk = to_clksrc(clk);
- void __iomem *reg = sclk->reg_divider;
- unsigned int div;
- u32 val;
-
- rate = clk_round_rate(clk, rate);
- div = clk_get_rate(clk->parent) / rate;
- if (div > 16)
- return -EINVAL;
-
- val = __raw_readl(reg);
- val &= ~(0xf << sclk->divider_shift);
- val |= (div - 1) << sclk->divider_shift;
- __raw_writel(val, reg);
-
- return 0;
-}
-
-static int s3c64xx_setparent_clksrc(struct clk *clk, struct clk *parent)
-{
- struct clksrc_clk *sclk = to_clksrc(clk);
- struct clk_sources *srcs = sclk->sources;
- u32 clksrc = __raw_readl(S3C_CLK_SRC);
- int src_nr = -1;
- int ptr;
-
- for (ptr = 0; ptr < srcs->nr_sources; ptr++)
- if (srcs->sources[ptr] == parent) {
- src_nr = ptr;
- break;
- }
-
- if (src_nr >= 0) {
- clksrc &= ~sclk->mask;
- clksrc |= src_nr << sclk->shift;
-
- __raw_writel(clksrc, S3C_CLK_SRC);
-
- clk->parent = parent;
- return 0;
- }
-
- return -EINVAL;
-}
-
-static unsigned long s3c64xx_roundrate_clksrc(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- int div;
-
- if (rate > parent_rate)
- rate = parent_rate;
- else {
- div = parent_rate / rate;
-
- if (div == 0)
- div = 1;
- if (div > 16)
- div = 16;
-
- rate = parent_rate / div;
- }
-
- return rate;
-}
-
/* clocks that feed other parts of the clock source tree */
static struct clk clk_iis_cd0 = {
@@ -382,7 +276,7 @@ static struct clk *clkset_audio0_list[] = {
[4] = &clk_pcm_cd,
};
-static struct clk_sources clkset_audio0 = {
+static struct clksrc_sources clkset_audio0 = {
.sources = clkset_audio0_list,
.nr_sources = ARRAY_SIZE(clkset_audio0_list),
};
@@ -395,7 +289,7 @@ static struct clk *clkset_audio1_list[] = {
[4] = &clk_pcm_cd,
};
-static struct clk_sources clkset_audio1 = {
+static struct clksrc_sources clkset_audio1 = {
.sources = clkset_audio1_list,
.nr_sources = ARRAY_SIZE(clkset_audio1_list),
};
@@ -404,7 +298,7 @@ static struct clk *clkset_camif_list[] = {
&clk_h2,
};
-static struct clk_sources clkset_camif = {
+static struct clksrc_sources clkset_camif = {
.sources = clkset_camif_list,
.nr_sources = ARRAY_SIZE(clkset_camif_list),
};
@@ -417,11 +311,9 @@ static struct clksrc_clk clksrcs[] = {
.ctrlbit = S3C_CLKCON_SCLK_MMC0,
.enable = s3c64xx_sclk_ctrl,
},
- .shift = S3C6400_CLKSRC_MMC0_SHIFT,
- .mask = S3C6400_CLKSRC_MMC0_MASK,
+ .reg_src = { S3C_CLK_SRC, 18, 2 },
+ .reg_div = { S3C_CLK_DIV1, 0, 4 },
.sources = &clkset_spi_mmc,
- .divider_shift = S3C6400_CLKDIV1_MMC0_SHIFT,
- .reg_divider = S3C_CLK_DIV1,
}, {
.clk = {
.name = "mmc_bus",
@@ -429,11 +321,9 @@ static struct clksrc_clk clksrcs[] = {
.ctrlbit = S3C_CLKCON_SCLK_MMC1,
.enable = s3c64xx_sclk_ctrl,
},
- .shift = S3C6400_CLKSRC_MMC1_SHIFT,
- .mask = S3C6400_CLKSRC_MMC1_MASK,
+ .reg_src = { S3C_CLK_SRC, 20, 2 },
+ .reg_div = { S3C_CLK_DIV1, 4, 4 },
.sources = &clkset_spi_mmc,
- .divider_shift = S3C6400_CLKDIV1_MMC1_SHIFT,
- .reg_divider = S3C_CLK_DIV1,
}, {
.clk = {
.name = "mmc_bus",
@@ -441,11 +331,9 @@ static struct clksrc_clk clksrcs[] = {
.ctrlbit = S3C_CLKCON_SCLK_MMC2,
.enable = s3c64xx_sclk_ctrl,
},
- .shift = S3C6400_CLKSRC_MMC2_SHIFT,
- .mask = S3C6400_CLKSRC_MMC2_MASK,
+ .reg_src = { S3C_CLK_SRC, 22, 2 },
+ .reg_div = { S3C_CLK_DIV1, 8, 4 },
.sources = &clkset_spi_mmc,
- .divider_shift = S3C6400_CLKDIV1_MMC2_SHIFT,
- .reg_divider = S3C_CLK_DIV1,
}, {
.clk = {
.name = "usb-bus-host",
@@ -453,11 +341,9 @@ static struct clksrc_clk clksrcs[] = {
.ctrlbit = S3C_CLKCON_SCLK_UHOST,
.enable = s3c64xx_sclk_ctrl,
},
- .shift = S3C6400_CLKSRC_UHOST_SHIFT,
- .mask = S3C6400_CLKSRC_UHOST_MASK,
+ .reg_src = { S3C_CLK_SRC, 5, 2 },
+ .reg_div = { S3C_CLK_DIV1, 20, 4 },
.sources = &clkset_uhost,
- .divider_shift = S3C6400_CLKDIV1_UHOST_SHIFT,
- .reg_divider = S3C_CLK_DIV1,
}, {
.clk = {
.name = "uclk1",
@@ -465,11 +351,9 @@ static struct clksrc_clk clksrcs[] = {
.ctrlbit = S3C_CLKCON_SCLK_UART,
.enable = s3c64xx_sclk_ctrl,
},
- .shift = S3C6400_CLKSRC_UART_SHIFT,
- .mask = S3C6400_CLKSRC_UART_MASK,
+ .reg_src = { S3C_CLK_SRC, 13, 1 },
+ .reg_div = { S3C_CLK_DIV2, 16, 4 },
.sources = &clkset_uart,
- .divider_shift = S3C6400_CLKDIV2_UART_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
}, {
/* Where does UCLK0 come from? */
.clk = {
@@ -478,11 +362,9 @@ static struct clksrc_clk clksrcs[] = {
.ctrlbit = S3C_CLKCON_SCLK_SPI0,
.enable = s3c64xx_sclk_ctrl,
},
- .shift = S3C6400_CLKSRC_SPI0_SHIFT,
- .mask = S3C6400_CLKSRC_SPI0_MASK,
+ .reg_src = { S3C_CLK_SRC, 14, 2 },
+ .reg_div = { S3C_CLK_DIV2, 0, 4 },
.sources = &clkset_spi_mmc,
- .divider_shift = S3C6400_CLKDIV2_SPI0_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
}, {
.clk = {
.name = "spi-bus",
@@ -490,11 +372,9 @@ static struct clksrc_clk clksrcs[] = {
.ctrlbit = S3C_CLKCON_SCLK_SPI1,
.enable = s3c64xx_sclk_ctrl,
},
- .shift = S3C6400_CLKSRC_SPI1_SHIFT,
- .mask = S3C6400_CLKSRC_SPI1_MASK,
+ .reg_src = { S3C_CLK_SRC, 16, 2 },
+ .reg_div = { S3C_CLK_DIV2, 4, 4 },
.sources = &clkset_spi_mmc,
- .divider_shift = S3C6400_CLKDIV2_SPI1_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
}, {
.clk = {
.name = "audio-bus",
@@ -502,11 +382,9 @@ static struct clksrc_clk clksrcs[] = {
.ctrlbit = S3C_CLKCON_SCLK_AUDIO0,
.enable = s3c64xx_sclk_ctrl,
},
- .shift = S3C6400_CLKSRC_AUDIO0_SHIFT,
- .mask = S3C6400_CLKSRC_AUDIO0_MASK,
+ .reg_src = { S3C_CLK_SRC, 7, 3 },
+ .reg_div = { S3C_CLK_DIV2, 8, 4 },
.sources = &clkset_audio0,
- .divider_shift = S3C6400_CLKDIV2_AUDIO0_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
}, {
.clk = {
.name = "audio-bus",
@@ -514,11 +392,9 @@ static struct clksrc_clk clksrcs[] = {
.ctrlbit = S3C_CLKCON_SCLK_AUDIO1,
.enable = s3c64xx_sclk_ctrl,
},
- .shift = S3C6400_CLKSRC_AUDIO1_SHIFT,
- .mask = S3C6400_CLKSRC_AUDIO1_MASK,
+ .reg_src = { S3C_CLK_SRC, 10, 3 },
+ .reg_div = { S3C_CLK_DIV2, 12, 4 },
.sources = &clkset_audio1,
- .divider_shift = S3C6400_CLKDIV2_AUDIO1_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
}, {
.clk = {
.name = "irda-bus",
@@ -526,11 +402,9 @@ static struct clksrc_clk clksrcs[] = {
.ctrlbit = S3C_CLKCON_SCLK_IRDA,
.enable = s3c64xx_sclk_ctrl,
},
- .shift = S3C6400_CLKSRC_IRDA_SHIFT,
- .mask = S3C6400_CLKSRC_IRDA_MASK,
+ .reg_src = { S3C_CLK_SRC, 24, 2 },
+ .reg_div = { S3C_CLK_DIV2, 20, 4 },
.sources = &clkset_irda,
- .divider_shift = S3C6400_CLKDIV2_IRDA_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
}, {
.clk = {
.name = "camera",
@@ -538,11 +412,9 @@ static struct clksrc_clk clksrcs[] = {
.ctrlbit = S3C_CLKCON_SCLK_CAM,
.enable = s3c64xx_sclk_ctrl,
},
- .shift = 0,
- .mask = 0,
+ .reg_div = { S3C_CLK_DIV0, 20, 4 },
+ .reg_src = { NULL, 0, 0 },
.sources = &clkset_camif,
- .divider_shift = S3C6400_CLKDIV0_CAM_SHIFT,
- .reg_divider = S3C_CLK_DIV0,
},
};
@@ -554,27 +426,6 @@ static struct clksrc_clk *init_parents[] = {
&clk_mout_mpll,
};
-static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
-{
- struct clk_sources *srcs = clk->sources;
- u32 clksrc = __raw_readl(S3C_CLK_SRC);
-
- clksrc &= clk->mask;
- clksrc >>= clk->shift;
-
- if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
- printk(KERN_ERR "%s: bad source %d\n",
- clk->clk.name, clksrc);
- return;
- }
-
- clk->clk.parent = srcs->sources[clksrc];
-
- printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
- clk->clk.name, clk->clk.parent->name, clksrc,
- clk_get_rate(&clk->clk));
-}
-
#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
void __init_or_cpufreq s3c6400_setup_clocks(void)
@@ -633,10 +484,10 @@ void __init_or_cpufreq s3c6400_setup_clocks(void)
clk_f.rate = fclk;
for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
- s3c6400_set_clksrc(init_parents[ptr]);
+ s3c_set_clksrc(init_parents[ptr]);
for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c6400_set_clksrc(&clksrcs[ptr]);
+ s3c_set_clksrc(&clksrcs[ptr]);
}
static struct clk *clks[] __initdata = {
@@ -680,21 +531,7 @@ void __init s3c6400_register_clocks(unsigned armclk_divlimit)
}
}
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) {
- clkp = &clksrcs[ptr].clk;
-
- /* all clksrc clocks have these */
- clkp->get_rate = s3c64xx_getrate_clksrc;
- clkp->set_rate = s3c64xx_setrate_clksrc;
- clkp->set_parent = s3c64xx_setparent_clksrc;
- clkp->round_rate = s3c64xx_roundrate_clksrc;
-
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
- }
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
clk_mpll.parent = &clk_mout_mpll.clk;
clk_epll.parent = &clk_mout_epll.clk;
--
1.5.6.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [[clock v2]] ARM: S3C64XX: Remove unused clock definitions from clock header
2009-12-08 2:07 Samsung clock updates v2 Ben Dooks
` (4 preceding siblings ...)
2009-12-08 2:07 ` [[clock v2]] ARM: S3C64XX: Use new clock-clksrc.c code for clocks Ben Dooks
@ 2009-12-08 2:07 ` Ben Dooks
2009-12-08 2:07 ` [[clock v2]] ARM: SAMSUNG: Reduce size of struct clk Ben Dooks
2009-12-08 2:07 ` [[clock v2]] ARM: S3C64XX: Fixup .reg_src and .reg_div with named initialisers Ben Dooks
7 siblings, 0 replies; 9+ messages in thread
From: Ben Dooks @ 2009-12-08 2:07 UTC (permalink / raw)
To: linux-arm-kernel
From: Harald Welte <laforge@gnumonks.org>
Clean out the definitions we are no longer using after the new clock
code updates.
Signed-off-by: Harald Welte <laforge@gnumonks.org>
[ben-linux at fluff.org: split from initial patch provided]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/plat-s3c64xx/include/plat/regs-clock.h | 71 +----------------------
1 files changed, 1 insertions(+), 70 deletions(-)
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
index ff46e7f..3ef6274 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
@@ -35,14 +35,6 @@
#define S3C_MEM0_GATE S3C_CLKREG(0x3C)
/* CLKDIV0 */
-#define S3C6400_CLKDIV0_MFC_MASK (0xf << 28)
-#define S3C6400_CLKDIV0_MFC_SHIFT (28)
-#define S3C6400_CLKDIV0_JPEG_MASK (0xf << 24)
-#define S3C6400_CLKDIV0_JPEG_SHIFT (24)
-#define S3C6400_CLKDIV0_CAM_MASK (0xf << 20)
-#define S3C6400_CLKDIV0_CAM_SHIFT (20)
-#define S3C6400_CLKDIV0_SECURITY_MASK (0x3 << 18)
-#define S3C6400_CLKDIV0_SECURITY_SHIFT (18)
#define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12)
#define S3C6400_CLKDIV0_PCLK_SHIFT (12)
#define S3C6400_CLKDIV0_HCLK2_MASK (0x7 << 9)
@@ -51,42 +43,11 @@
#define S3C6400_CLKDIV0_HCLK_SHIFT (8)
#define S3C6400_CLKDIV0_MPLL_MASK (0x1 << 4)
#define S3C6400_CLKDIV0_MPLL_SHIFT (4)
+
#define S3C6400_CLKDIV0_ARM_MASK (0x7 << 0)
#define S3C6410_CLKDIV0_ARM_MASK (0xf << 0)
#define S3C6400_CLKDIV0_ARM_SHIFT (0)
-/* CLKDIV1 */
-#define S3C6410_CLKDIV1_FIMC_MASK (0xf << 24)
-#define S3C6410_CLKDIV1_FIMC_SHIFT (24)
-#define S3C6400_CLKDIV1_UHOST_MASK (0xf << 20)
-#define S3C6400_CLKDIV1_UHOST_SHIFT (20)
-#define S3C6400_CLKDIV1_SCALER_MASK (0xf << 16)
-#define S3C6400_CLKDIV1_SCALER_SHIFT (16)
-#define S3C6400_CLKDIV1_LCD_MASK (0xf << 12)
-#define S3C6400_CLKDIV1_LCD_SHIFT (12)
-#define S3C6400_CLKDIV1_MMC2_MASK (0xf << 8)
-#define S3C6400_CLKDIV1_MMC2_SHIFT (8)
-#define S3C6400_CLKDIV1_MMC1_MASK (0xf << 4)
-#define S3C6400_CLKDIV1_MMC1_SHIFT (4)
-#define S3C6400_CLKDIV1_MMC0_MASK (0xf << 0)
-#define S3C6400_CLKDIV1_MMC0_SHIFT (0)
-
-/* CLKDIV2 */
-#define S3C6410_CLKDIV2_AUDIO2_MASK (0xf << 24)
-#define S3C6410_CLKDIV2_AUDIO2_SHIFT (24)
-#define S3C6400_CLKDIV2_IRDA_MASK (0xf << 20)
-#define S3C6400_CLKDIV2_IRDA_SHIFT (20)
-#define S3C6400_CLKDIV2_UART_MASK (0xf << 16)
-#define S3C6400_CLKDIV2_UART_SHIFT (16)
-#define S3C6400_CLKDIV2_AUDIO1_MASK (0xf << 12)
-#define S3C6400_CLKDIV2_AUDIO1_SHIFT (12)
-#define S3C6400_CLKDIV2_AUDIO0_MASK (0xf << 8)
-#define S3C6400_CLKDIV2_AUDIO0_SHIFT (8)
-#define S3C6400_CLKDIV2_SPI1_MASK (0xf << 4)
-#define S3C6400_CLKDIV2_SPI1_SHIFT (4)
-#define S3C6400_CLKDIV2_SPI0_MASK (0xf << 0)
-#define S3C6400_CLKDIV2_SPI0_SHIFT (0)
-
/* HCLK GATE Registers */
#define S3C_CLKCON_HCLK_3DSE (1<<31)
#define S3C_CLKCON_HCLK_UHOST (1<<29)
@@ -192,34 +153,4 @@
#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT (2)
#define S3C6400_CLKSRC_MFC (1 << 4)
-#define S3C6410_CLKSRC_TV27_MASK (0x1 << 31)
-#define S3C6410_CLKSRC_TV27_SHIFT (31)
-#define S3C6410_CLKSRC_DAC27_MASK (0x1 << 30)
-#define S3C6410_CLKSRC_DAC27_SHIFT (30)
-#define S3C6400_CLKSRC_SCALER_MASK (0x3 << 28)
-#define S3C6400_CLKSRC_SCALER_SHIFT (28)
-#define S3C6400_CLKSRC_LCD_MASK (0x3 << 26)
-#define S3C6400_CLKSRC_LCD_SHIFT (26)
-#define S3C6400_CLKSRC_IRDA_MASK (0x3 << 24)
-#define S3C6400_CLKSRC_IRDA_SHIFT (24)
-#define S3C6400_CLKSRC_MMC2_MASK (0x3 << 22)
-#define S3C6400_CLKSRC_MMC2_SHIFT (22)
-#define S3C6400_CLKSRC_MMC1_MASK (0x3 << 20)
-#define S3C6400_CLKSRC_MMC1_SHIFT (20)
-#define S3C6400_CLKSRC_MMC0_MASK (0x3 << 18)
-#define S3C6400_CLKSRC_MMC0_SHIFT (18)
-#define S3C6400_CLKSRC_SPI1_MASK (0x3 << 16)
-#define S3C6400_CLKSRC_SPI1_SHIFT (16)
-#define S3C6400_CLKSRC_SPI0_MASK (0x3 << 14)
-#define S3C6400_CLKSRC_SPI0_SHIFT (14)
-#define S3C6400_CLKSRC_UART_MASK (0x1 << 13)
-#define S3C6400_CLKSRC_UART_SHIFT (13)
-#define S3C6400_CLKSRC_AUDIO1_MASK (0x7 << 10)
-#define S3C6400_CLKSRC_AUDIO1_SHIFT (10)
-#define S3C6400_CLKSRC_AUDIO0_MASK (0x7 << 7)
-#define S3C6400_CLKSRC_AUDIO0_SHIFT (7)
-#define S3C6400_CLKSRC_UHOST_MASK (0x3 << 5)
-#define S3C6400_CLKSRC_UHOST_SHIFT (5)
-
-
#endif /* _PLAT_REGS_CLOCK_H */
--
1.5.6.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [[clock v2]] ARM: SAMSUNG: Reduce size of struct clk.
2009-12-08 2:07 Samsung clock updates v2 Ben Dooks
` (5 preceding siblings ...)
2009-12-08 2:07 ` [[clock v2]] ARM: S3C64XX: Remove unused clock definitions from clock header Ben Dooks
@ 2009-12-08 2:07 ` Ben Dooks
2009-12-08 2:07 ` [[clock v2]] ARM: S3C64XX: Fixup .reg_src and .reg_div with named initialisers Ben Dooks
7 siblings, 0 replies; 9+ messages in thread
From: Ben Dooks @ 2009-12-08 2:07 UTC (permalink / raw)
To: linux-arm-kernel
Reduce the size of struct clk by 12 bytes and make defining clocks with
common implementation functions easier by moving the set_rate, get_rate,
round_rate and set_parent calls into a new structure called 'struct clk_ops'
and using that instead.
This change does make a few clocks larger as they need their own clk_ops,
but this is outweighed by the number of clocks with either no ops or having
a common set of ops.
Update all the users of this.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/mach-s3c2412/clock.c | 52 +++++++----
arch/arm/mach-s3c2440/clock.c | 6 +-
arch/arm/mach-s3c2442/clock.c | 6 +-
arch/arm/mach-s3c2443/clock.c | 88 +++++++++++++-------
arch/arm/plat-s3c/clock.c | 31 ++++---
arch/arm/plat-s3c/pwm-clock.c | 94 +++++++++++----------
arch/arm/plat-s3c24xx/clock-dclk.c | 22 +++--
arch/arm/plat-s3c24xx/s3c244x-clock.c | 4 +-
arch/arm/plat-s3c64xx/s3c6400-clock.c | 14 ++-
arch/arm/plat-s5pc1xx/clock.c | 8 ++-
arch/arm/plat-s5pc1xx/s5pc100-clock.c | 126 ++++++++++++----------------
arch/arm/plat-samsung/clock-clksrc.c | 17 ++--
arch/arm/plat-samsung/include/plat/clock.h | 29 ++++++-
13 files changed, 286 insertions(+), 211 deletions(-)
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index a037df5..0c0505b 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -124,7 +124,9 @@ static struct clk clk_usysclk = {
.name = "usysclk",
.id = -1,
.parent = &clk_xtal,
- .set_parent = s3c2412_setparent_usysclk,
+ .ops = &(struct clk_ops) {
+ .set_parent = s3c2412_setparent_usysclk,
+ },
};
static struct clk clk_mrefclk = {
@@ -199,10 +201,12 @@ static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate)
static struct clk clk_usbsrc = {
.name = "usbsrc",
.id = -1,
- .get_rate = s3c2412_getrate_usbsrc,
- .set_rate = s3c2412_setrate_usbsrc,
- .round_rate = s3c2412_roundrate_usbsrc,
- .set_parent = s3c2412_setparent_usbsrc,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2412_getrate_usbsrc,
+ .set_rate = s3c2412_setrate_usbsrc,
+ .round_rate = s3c2412_roundrate_usbsrc,
+ .set_parent = s3c2412_setparent_usbsrc,
+ },
};
static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
@@ -225,7 +229,9 @@ static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
static struct clk clk_msysclk = {
.name = "msysclk",
.id = -1,
- .set_parent = s3c2412_setparent_msysclk,
+ .ops = &(struct clk_ops) {
+ .set_parent = s3c2412_setparent_msysclk,
+ },
};
static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent)
@@ -264,7 +270,9 @@ static struct clk clk_armclk = {
.name = "armclk",
.id = -1,
.parent = &clk_msysclk,
- .set_parent = s3c2412_setparent_armclk,
+ .ops = &(struct clk_ops) {
+ .set_parent = s3c2412_setparent_armclk,
+ },
};
/* these next clocks have an divider immediately after them,
@@ -337,10 +345,12 @@ static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate)
static struct clk clk_uart = {
.name = "uartclk",
.id = -1,
- .get_rate = s3c2412_getrate_uart,
- .set_rate = s3c2412_setrate_uart,
- .set_parent = s3c2412_setparent_uart,
- .round_rate = s3c2412_roundrate_clksrc,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2412_getrate_uart,
+ .set_rate = s3c2412_setrate_uart,
+ .set_parent = s3c2412_setparent_uart,
+ .round_rate = s3c2412_roundrate_clksrc,
+ },
};
static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent)
@@ -388,10 +398,12 @@ static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate)
static struct clk clk_i2s = {
.name = "i2sclk",
.id = -1,
- .get_rate = s3c2412_getrate_i2s,
- .set_rate = s3c2412_setrate_i2s,
- .set_parent = s3c2412_setparent_i2s,
- .round_rate = s3c2412_roundrate_clksrc,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2412_getrate_i2s,
+ .set_rate = s3c2412_setrate_i2s,
+ .set_parent = s3c2412_setparent_i2s,
+ .round_rate = s3c2412_roundrate_clksrc,
+ },
};
static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent)
@@ -438,10 +450,12 @@ static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate)
static struct clk clk_cam = {
.name = "camif-upll", /* same as 2440 name */
.id = -1,
- .get_rate = s3c2412_getrate_cam,
- .set_rate = s3c2412_setrate_cam,
- .set_parent = s3c2412_setparent_cam,
- .round_rate = s3c2412_roundrate_clksrc,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2412_getrate_cam,
+ .set_rate = s3c2412_setrate_cam,
+ .set_parent = s3c2412_setparent_cam,
+ .round_rate = s3c2412_roundrate_clksrc,
+ },
};
/* standard clock definitions */
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index d1c29b2..3dc2426 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -98,8 +98,10 @@ static struct clk s3c2440_clk_cam = {
static struct clk s3c2440_clk_cam_upll = {
.name = "camif-upll",
.id = -1,
- .set_rate = s3c2440_camif_upll_setrate,
- .round_rate = s3c2440_camif_upll_round,
+ .ops = &(struct clk_ops) {
+ .set_rate = s3c2440_camif_upll_setrate,
+ .round_rate = s3c2440_camif_upll_round,
+ },
};
static struct clk s3c2440_clk_ac97 = {
diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c
index ea1aa1f..d9b692a 100644
--- a/arch/arm/mach-s3c2442/clock.c
+++ b/arch/arm/mach-s3c2442/clock.c
@@ -109,8 +109,10 @@ static struct clk s3c2442_clk_cam = {
static struct clk s3c2442_clk_cam_upll = {
.name = "camif-upll",
.id = -1,
- .set_rate = s3c2442_camif_upll_setrate,
- .round_rate = s3c2442_camif_upll_round,
+ .ops = &(struct clk_ops) {
+ .set_rate = s3c2442_camif_upll_setrate,
+ .round_rate = s3c2442_camif_upll_round,
+ },
};
static int s3c2442_clk_add(struct sys_device *sysdev)
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 2785d69..91db4f5 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -187,7 +187,9 @@ static int s3c2443_setparent_epllref(struct clk *clk, struct clk *parent)
static struct clk clk_epllref = {
.name = "epllref",
.id = -1,
- .set_parent = s3c2443_setparent_epllref,
+ .ops = &(struct clk_ops) {
+ .set_parent = s3c2443_setparent_epllref,
+ },
};
static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
@@ -205,7 +207,9 @@ static struct clk clk_mdivclk = {
.name = "mdivclk",
.parent = &clk_mpllref,
.id = -1,
- .get_rate = s3c2443_getrate_mdivclk,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2443_getrate_mdivclk,
+ },
};
static int s3c2443_setparent_msysclk(struct clk *clk, struct clk *parent)
@@ -232,7 +236,9 @@ static struct clk clk_msysclk = {
.name = "msysclk",
.parent = &clk_xtal,
.id = -1,
- .set_parent = s3c2443_setparent_msysclk,
+ .ops = &(struct clk_ops) {
+ .set_parent = s3c2443_setparent_msysclk,
+ },
};
/* armdiv
@@ -273,7 +279,9 @@ static int s3c2443_setparent_armclk(struct clk *clk, struct clk *parent)
static struct clk clk_arm = {
.name = "armclk",
.id = -1,
- .set_parent = s3c2443_setparent_armclk,
+ .ops = &(struct clk_ops) {
+ .set_parent = s3c2443_setparent_armclk,
+ },
};
/* esysclk
@@ -302,7 +310,9 @@ static struct clk clk_esysclk = {
.name = "esysclk",
.parent = &clk_epll,
.id = -1,
- .set_parent = s3c2443_setparent_esysclk,
+ .ops = &(struct clk_ops) {
+ .set_parent = s3c2443_setparent_esysclk,
+ },
};
/* uartclk
@@ -341,9 +351,11 @@ static struct clk clk_uart = {
.name = "uartclk",
.id = -1,
.parent = &clk_esysclk,
- .get_rate = s3c2443_getrate_uart,
- .set_rate = s3c2443_setrate_uart,
- .round_rate = s3c2443_roundrate_clksrc16,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2443_getrate_uart,
+ .set_rate = s3c2443_setrate_uart,
+ .round_rate = s3c2443_roundrate_clksrc16,
+ },
};
/* hsspi
@@ -384,9 +396,11 @@ static struct clk clk_hsspi = {
.parent = &clk_esysclk,
.ctrlbit = S3C2443_SCLKCON_HSSPICLK,
.enable = s3c2443_clkcon_enable_s,
- .get_rate = s3c2443_getrate_hsspi,
- .set_rate = s3c2443_setrate_hsspi,
- .round_rate = s3c2443_roundrate_clksrc4,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2443_getrate_hsspi,
+ .set_rate = s3c2443_setrate_hsspi,
+ .round_rate = s3c2443_roundrate_clksrc4,
+ },
};
/* usbhost
@@ -426,9 +440,11 @@ static struct clk clk_usb_bus_host = {
.parent = &clk_esysclk,
.ctrlbit = S3C2443_SCLKCON_USBHOST,
.enable = s3c2443_clkcon_enable_s,
- .get_rate = s3c2443_getrate_usbhost,
- .set_rate = s3c2443_setrate_usbhost,
- .round_rate = s3c2443_roundrate_clksrc4,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2443_getrate_usbhost,
+ .set_rate = s3c2443_setrate_usbhost,
+ .round_rate = s3c2443_roundrate_clksrc4,
+ },
};
/* clk_hsmcc_div
@@ -468,9 +484,11 @@ static struct clk clk_hsmmc_div = {
.name = "hsmmc-div",
.id = -1,
.parent = &clk_esysclk,
- .get_rate = s3c2443_getrate_hsmmc_div,
- .set_rate = s3c2443_setrate_hsmmc_div,
- .round_rate = s3c2443_roundrate_clksrc4,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2443_getrate_hsmmc_div,
+ .set_rate = s3c2443_setrate_hsmmc_div,
+ .round_rate = s3c2443_roundrate_clksrc4,
+ },
};
static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent)
@@ -505,7 +523,9 @@ static struct clk clk_hsmmc = {
.id = -1,
.parent = &clk_hsmmc_div,
.enable = s3c2443_enable_hsmmc,
- .set_parent = s3c2443_setparent_hsmmc,
+ .ops = &(struct clk_ops) {
+ .set_parent = s3c2443_setparent_hsmmc,
+ },
};
/* i2s_eplldiv
@@ -543,9 +563,11 @@ static struct clk clk_i2s_eplldiv = {
.name = "i2s-eplldiv",
.id = -1,
.parent = &clk_esysclk,
- .get_rate = s3c2443_getrate_i2s_eplldiv,
- .set_rate = s3c2443_setrate_i2s_eplldiv,
- .round_rate = s3c2443_roundrate_clksrc16,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2443_getrate_i2s_eplldiv,
+ .set_rate = s3c2443_setrate_i2s_eplldiv,
+ .round_rate = s3c2443_roundrate_clksrc16,
+ },
};
/* i2s-ref
@@ -578,7 +600,9 @@ static struct clk clk_i2s = {
.parent = &clk_i2s_eplldiv,
.ctrlbit = S3C2443_SCLKCON_I2SCLK,
.enable = s3c2443_clkcon_enable_s,
- .set_parent = s3c2443_setparent_i2s,
+ .ops = &(struct clk_ops) {
+ .set_parent = s3c2443_setparent_i2s,
+ },
};
/* cam-if
@@ -618,9 +642,11 @@ static struct clk clk_cam = {
.parent = &clk_esysclk,
.ctrlbit = S3C2443_SCLKCON_CAMCLK,
.enable = s3c2443_clkcon_enable_s,
- .get_rate = s3c2443_getrate_cam,
- .set_rate = s3c2443_setrate_cam,
- .round_rate = s3c2443_roundrate_clksrc16,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2443_getrate_cam,
+ .set_rate = s3c2443_setrate_cam,
+ .round_rate = s3c2443_roundrate_clksrc16,
+ },
};
/* display-if
@@ -660,9 +686,11 @@ static struct clk clk_display = {
.parent = &clk_esysclk,
.ctrlbit = S3C2443_SCLKCON_DISPCLK,
.enable = s3c2443_clkcon_enable_s,
- .get_rate = s3c2443_getrate_display,
- .set_rate = s3c2443_setrate_display,
- .round_rate = s3c2443_roundrate_clksrc256,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2443_getrate_display,
+ .set_rate = s3c2443_setrate_display,
+ .round_rate = s3c2443_roundrate_clksrc256,
+ },
};
/* prediv
@@ -685,7 +713,9 @@ static struct clk clk_prediv = {
.name = "prediv",
.id = -1,
.parent = &clk_msysclk,
- .get_rate = s3c2443_prediv_getrate,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2443_prediv_getrate,
+ },
};
/* standard clock definitions */
diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-s3c/clock.c
index 619cfa8..fa91125 100644
--- a/arch/arm/plat-s3c/clock.c
+++ b/arch/arm/plat-s3c/clock.c
@@ -150,8 +150,8 @@ unsigned long clk_get_rate(struct clk *clk)
if (clk->rate != 0)
return clk->rate;
- if (clk->get_rate != NULL)
- return (clk->get_rate)(clk);
+ if (clk->ops != NULL && clk->ops->get_rate != NULL)
+ return (clk->ops->get_rate)(clk);
if (clk->parent != NULL)
return clk_get_rate(clk->parent);
@@ -161,8 +161,8 @@ unsigned long clk_get_rate(struct clk *clk)
long clk_round_rate(struct clk *clk, unsigned long rate)
{
- if (!IS_ERR(clk) && clk->round_rate)
- return (clk->round_rate)(clk, rate);
+ if (!IS_ERR(clk) && clk->ops && clk->ops->round_rate)
+ return (clk->ops->round_rate)(clk, rate);
return rate;
}
@@ -178,13 +178,14 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
* the clock may have been made this way by choice.
*/
- WARN_ON(clk->set_rate == NULL);
+ WARN_ON(clk->ops == NULL);
+ WARN_ON(clk->ops && clk->ops->set_rate == NULL);
- if (clk->set_rate == NULL)
+ if (clk->ops == NULL || clk->ops->set_rate == NULL)
return -EINVAL;
spin_lock(&clocks_lock);
- ret = (clk->set_rate)(clk, rate);
+ ret = (clk->ops->set_rate)(clk, rate);
spin_unlock(&clocks_lock);
return ret;
@@ -204,8 +205,8 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
spin_lock(&clocks_lock);
- if (clk->set_parent)
- ret = (clk->set_parent)(clk, parent);
+ if (clk->ops && clk->ops->set_parent)
+ ret = (clk->ops->set_parent)(clk, parent);
spin_unlock(&clocks_lock);
@@ -230,6 +231,10 @@ static int clk_default_setrate(struct clk *clk, unsigned long rate)
return 0;
}
+static struct clk_ops clk_ops_def_setrate = {
+ .set_rate = clk_default_setrate,
+};
+
struct clk clk_xtal = {
.name = "xtal",
.id = -1,
@@ -251,7 +256,7 @@ struct clk clk_epll = {
struct clk clk_mpll = {
.name = "mpll",
.id = -1,
- .set_rate = clk_default_setrate,
+ .ops = &clk_ops_def_setrate,
};
struct clk clk_upll = {
@@ -267,7 +272,6 @@ struct clk clk_f = {
.rate = 0,
.parent = &clk_mpll,
.ctrlbit = 0,
- .set_rate = clk_default_setrate,
};
struct clk clk_h = {
@@ -276,7 +280,7 @@ struct clk clk_h = {
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
- .set_rate = clk_default_setrate,
+ .ops = &clk_ops_def_setrate,
};
struct clk clk_p = {
@@ -285,7 +289,7 @@ struct clk clk_p = {
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
- .set_rate = clk_default_setrate,
+ .ops = &clk_ops_def_setrate,
};
struct clk clk_usb_bus = {
@@ -296,7 +300,6 @@ struct clk clk_usb_bus = {
};
-
struct clk s3c24xx_uclk = {
.name = "uclk",
.id = -1,
diff --git a/arch/arm/plat-s3c/pwm-clock.c b/arch/arm/plat-s3c/pwm-clock.c
index a318215..1808fa8 100644
--- a/arch/arm/plat-s3c/pwm-clock.c
+++ b/arch/arm/plat-s3c/pwm-clock.c
@@ -130,20 +130,22 @@ static int clk_pwm_scaler_set_rate(struct clk *clk, unsigned long rate)
return 0;
}
+static struct clk_ops clk_pwm_scaler_ops = {
+ .get_rate = clk_pwm_scaler_get_rate,
+ .set_rate = clk_pwm_scaler_set_rate,
+ .round_rate = clk_pwm_scaler_round_rate,
+};
+
static struct clk clk_timer_scaler[] = {
[0] = {
.name = "pwm-scaler0",
.id = -1,
- .get_rate = clk_pwm_scaler_get_rate,
- .set_rate = clk_pwm_scaler_set_rate,
- .round_rate = clk_pwm_scaler_round_rate,
+ .ops = &clk_pwm_scaler_ops,
},
[1] = {
.name = "pwm-scaler1",
.id = -1,
- .get_rate = clk_pwm_scaler_get_rate,
- .set_rate = clk_pwm_scaler_set_rate,
- .round_rate = clk_pwm_scaler_round_rate,
+ .ops = &clk_pwm_scaler_ops,
},
};
@@ -256,50 +258,46 @@ static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
return 0;
}
+static struct clk_ops clk_tdiv_ops = {
+ .get_rate = clk_pwm_tdiv_get_rate,
+ .set_rate = clk_pwm_tdiv_set_rate,
+ .round_rate = clk_pwm_tdiv_round_rate,
+};
+
static struct pwm_tdiv_clk clk_timer_tdiv[] = {
[0] = {
.clk = {
- .name = "pwm-tdiv",
- .parent = &clk_timer_scaler[0],
- .get_rate = clk_pwm_tdiv_get_rate,
- .set_rate = clk_pwm_tdiv_set_rate,
- .round_rate = clk_pwm_tdiv_round_rate,
+ .name = "pwm-tdiv",
+ .ops = &clk_tdiv_ops,
+ .parent = &clk_timer_scaler[0],
},
},
[1] = {
.clk = {
- .name = "pwm-tdiv",
- .parent = &clk_timer_scaler[0],
- .get_rate = clk_pwm_tdiv_get_rate,
- .set_rate = clk_pwm_tdiv_set_rate,
- .round_rate = clk_pwm_tdiv_round_rate,
+ .name = "pwm-tdiv",
+ .ops = &clk_tdiv_ops,
+ .parent = &clk_timer_scaler[0],
}
},
[2] = {
.clk = {
- .name = "pwm-tdiv",
- .parent = &clk_timer_scaler[1],
- .get_rate = clk_pwm_tdiv_get_rate,
- .set_rate = clk_pwm_tdiv_set_rate,
- .round_rate = clk_pwm_tdiv_round_rate,
+ .name = "pwm-tdiv",
+ .ops = &clk_tdiv_ops,
+ .parent = &clk_timer_scaler[1],
},
},
[3] = {
.clk = {
- .name = "pwm-tdiv",
- .parent = &clk_timer_scaler[1],
- .get_rate = clk_pwm_tdiv_get_rate,
- .set_rate = clk_pwm_tdiv_set_rate,
- .round_rate = clk_pwm_tdiv_round_rate,
+ .name = "pwm-tdiv",
+ .ops = &clk_tdiv_ops,
+ .parent = &clk_timer_scaler[1],
},
},
[4] = {
.clk = {
- .name = "pwm-tdiv",
- .parent = &clk_timer_scaler[1],
- .get_rate = clk_pwm_tdiv_get_rate,
- .set_rate = clk_pwm_tdiv_set_rate,
- .round_rate = clk_pwm_tdiv_round_rate,
+ .name = "pwm-tdiv",
+ .ops = &clk_tdiv_ops,
+ .parent = &clk_timer_scaler[1],
},
},
};
@@ -356,31 +354,35 @@ static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
return 0;
}
+static struct clk_ops clk_tin_ops = {
+ .set_parent = clk_pwm_tin_set_parent,
+};
+
static struct clk clk_tin[] = {
[0] = {
- .name = "pwm-tin",
- .id = 0,
- .set_parent = clk_pwm_tin_set_parent,
+ .name = "pwm-tin",
+ .id = 0,
+ .ops = &clk_tin_ops,
},
[1] = {
- .name = "pwm-tin",
- .id = 1,
- .set_parent = clk_pwm_tin_set_parent,
+ .name = "pwm-tin",
+ .id = 1,
+ .ops = &clk_tin_ops,
},
[2] = {
- .name = "pwm-tin",
- .id = 2,
- .set_parent = clk_pwm_tin_set_parent,
+ .name = "pwm-tin",
+ .id = 2,
+ .ops = &clk_tin_ops,
},
[3] = {
- .name = "pwm-tin",
- .id = 3,
- .set_parent = clk_pwm_tin_set_parent,
+ .name = "pwm-tin",
+ .id = 3,
+ .ops = &clk_tin_ops,
},
[4] = {
- .name = "pwm-tin",
- .id = 4,
- .set_parent = clk_pwm_tin_set_parent,
+ .name = "pwm-tin",
+ .id = 4,
+ .ops = &clk_tin_ops,
},
};
diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c
index ac061a1..cf97caa 100644
--- a/arch/arm/plat-s3c24xx/clock-dclk.c
+++ b/arch/arm/plat-s3c24xx/clock-dclk.c
@@ -161,14 +161,18 @@ static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
/* external clock definitions */
+static struct clk_ops dclk_ops = {
+ .set_parent = s3c24xx_dclk_setparent,
+ .set_rate = s3c24xx_set_dclk_rate,
+ .round_rate = s3c24xx_round_dclk_rate,
+};
+
struct clk s3c24xx_dclk0 = {
.name = "dclk0",
.id = -1,
.ctrlbit = S3C2410_DCLKCON_DCLK0EN,
.enable = s3c24xx_dclk_enable,
- .set_parent = s3c24xx_dclk_setparent,
- .set_rate = s3c24xx_set_dclk_rate,
- .round_rate = s3c24xx_round_dclk_rate,
+ .ops = &dclk_ops,
};
struct clk s3c24xx_dclk1 = {
@@ -176,19 +180,21 @@ struct clk s3c24xx_dclk1 = {
.id = -1,
.ctrlbit = S3C2410_DCLKCON_DCLK1EN,
.enable = s3c24xx_dclk_enable,
- .set_parent = s3c24xx_dclk_setparent,
- .set_rate = s3c24xx_set_dclk_rate,
- .round_rate = s3c24xx_round_dclk_rate,
+ .ops = &dclk_ops,
+};
+
+static struct clk_ops clkout_ops = {
+ .set_parent = s3c24xx_clkout_setparent,
};
struct clk s3c24xx_clkout0 = {
.name = "clkout0",
.id = -1,
- .set_parent = s3c24xx_clkout_setparent,
+ .ops = &clkout_ops,
};
struct clk s3c24xx_clkout1 = {
.name = "clkout1",
.id = -1,
- .set_parent = s3c24xx_clkout_setparent,
+ .ops = &clkout_ops,
};
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
index 7937109..f8d9613 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -68,7 +68,9 @@ static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
static struct clk clk_arm = {
.name = "armclk",
.id = -1,
- .set_parent = s3c2440_setparent_armclk,
+ .ops = &(struct clk_ops) {
+ .set_parent = s3c2440_setparent_armclk,
+ },
};
static int s3c244x_clk_add(struct sys_device *sysdev)
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index adc2e0a..79e4bd7 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -169,9 +169,11 @@ static struct clk clk_arm = {
.name = "armclk",
.id = -1,
.parent = &clk_mout_apll.clk,
- .get_rate = s3c64xx_clk_arm_get_rate,
- .set_rate = s3c64xx_clk_arm_set_rate,
- .round_rate = s3c64xx_clk_arm_round_rate,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c64xx_clk_arm_get_rate,
+ .set_rate = s3c64xx_clk_arm_set_rate,
+ .round_rate = s3c64xx_clk_arm_round_rate,
+ },
};
static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
@@ -186,11 +188,15 @@ static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
return rate;
}
+static struct clk_ops clk_dout_ops = {
+ .get_rate = s3c64xx_clk_doutmpll_get_rate,
+};
+
static struct clk clk_dout_mpll = {
.name = "dout_mpll",
.id = -1,
.parent = &clk_mout_mpll.clk,
- .get_rate = s3c64xx_clk_doutmpll_get_rate,
+ .ops = &clk_dout_ops,
};
static struct clk *clkset_spi_mmc_list[] = {
diff --git a/arch/arm/plat-s5pc1xx/clock.c b/arch/arm/plat-s5pc1xx/clock.c
index 26c21d8..2f4d8d4 100644
--- a/arch/arm/plat-s5pc1xx/clock.c
+++ b/arch/arm/plat-s5pc1xx/clock.c
@@ -70,6 +70,10 @@ static int clk_default_setrate(struct clk *clk, unsigned long rate)
return 0;
}
+static struct clk_ops clk_ops_default_setrate = {
+ .set_rate = clk_default_setrate,
+};
+
static int clk_dummy_enable(struct clk *clk, int enable)
{
return 0;
@@ -81,8 +85,8 @@ struct clk clk_hd0 = {
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
- .set_rate = clk_default_setrate,
.enable = clk_dummy_enable,
+ .ops = &clk_ops_default_setrate,
};
struct clk clk_pd0 = {
@@ -91,7 +95,7 @@ struct clk clk_pd0 = {
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
- .set_rate = clk_default_setrate,
+ .ops = &clk_ops_default_setrate,
.enable = clk_dummy_enable,
};
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
index b436d44..16f0b90 100644
--- a/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
@@ -111,7 +111,9 @@ static struct clk clk_dout_apll = {
.name = "dout_apll",
.id = -1,
.parent = &clk_mout_apll.clk,
- .get_rate = s5pc100_clk_dout_apll_get_rate,
+ .ops = &(struct clk_ops) {
+ .get_rate = s5pc100_clk_dout_apll_get_rate,
+ },
};
static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk)
@@ -165,9 +167,11 @@ static struct clk clk_arm = {
.name = "armclk",
.id = -1,
.parent = &clk_dout_apll,
- .get_rate = s5pc100_clk_arm_get_rate,
- .set_rate = s5pc100_clk_arm_set_rate,
- .round_rate = s5pc100_clk_arm_round_rate,
+ .ops = &(struct clk_ops) {
+ .get_rate = s5pc100_clk_arm_get_rate,
+ .set_rate = s5pc100_clk_arm_set_rate,
+ .round_rate = s5pc100_clk_arm_round_rate,
+ },
};
static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk)
@@ -185,7 +189,9 @@ static struct clk clk_dout_d0_bus = {
.name = "dout_d0_bus",
.id = -1,
.parent = &clk_arm,
- .get_rate = s5pc100_clk_dout_d0_bus_get_rate,
+ .ops = &(struct clk_ops) {
+ .get_rate = s5pc100_clk_dout_d0_bus_get_rate,
+ },
};
static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk)
@@ -203,7 +209,9 @@ static struct clk clk_dout_pclkd0 = {
.name = "dout_pclkd0",
.id = -1,
.parent = &clk_dout_d0_bus,
- .get_rate = s5pc100_clk_dout_pclkd0_get_rate,
+ .ops = &(struct clk_ops) {
+ .get_rate = s5pc100_clk_dout_pclkd0_get_rate,
+ },
};
static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk)
@@ -221,7 +229,9 @@ static struct clk clk_dout_apll2 = {
.name = "dout_apll2",
.id = -1,
.parent = &clk_mout_apll.clk,
- .get_rate = s5pc100_clk_dout_apll2_get_rate,
+ .ops = &(struct clk_ops) {
+ .get_rate = s5pc100_clk_dout_apll2_get_rate,
+ },
};
/* MPLL */
@@ -284,7 +294,9 @@ static struct clk clk_dout_d1_bus = {
.name = "dout_d1_bus",
.id = -1,
.parent = &clk_mout_am.clk,
- .get_rate = s5pc100_clk_dout_d1_bus_get_rate,
+ .ops = &(struct clk_ops) {
+ .get_rate = s5pc100_clk_dout_d1_bus_get_rate,
+ },
};
static struct clk *clkset_onenand_list[] = {
@@ -325,7 +337,9 @@ static struct clk clk_dout_pclkd1 = {
.name = "dout_pclkd1",
.id = -1,
.parent = &clk_dout_d1_bus,
- .get_rate = s5pc100_clk_dout_pclkd1_get_rate,
+ .ops = &(struct clk_ops) {
+ .get_rate = s5pc100_clk_dout_pclkd1_get_rate,
+ },
};
static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk)
@@ -345,7 +359,9 @@ static struct clk clk_dout_mpll2 = {
.name = "dout_mpll2",
.id = -1,
.parent = &clk_mout_am.clk,
- .get_rate = s5pc100_clk_dout_mpll2_get_rate,
+ .ops = &(struct clk_ops) {
+ .get_rate = s5pc100_clk_dout_mpll2_get_rate,
+ },
};
static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk)
@@ -365,7 +381,9 @@ static struct clk clk_dout_cam = {
.name = "dout_cam",
.id = -1,
.parent = &clk_dout_mpll2,
- .get_rate = s5pc100_clk_dout_cam_get_rate,
+ .ops = &(struct clk_ops) {
+ .get_rate = s5pc100_clk_dout_cam_get_rate,
+ },
};
static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk)
@@ -385,7 +403,9 @@ static struct clk clk_dout_mpll = {
.name = "dout_mpll",
.id = -1,
.parent = &clk_mout_am.clk,
- .get_rate = s5pc100_clk_dout_mpll_get_rate,
+ .ops = &(struct clk_ops) {
+ .get_rate = s5pc100_clk_dout_mpll_get_rate,
+ },
};
/* EPLL */
@@ -540,6 +560,13 @@ static unsigned long s5pc100_roundrate_clksrc(struct clk *clk,
return rate;
}
+static struct clk_ops s5pc100_clksrc_ops = {
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+};
+
static struct clk *clkset_spi_list[] = {
&clk_mout_epll.clk,
&clk_dout_mpll2,
@@ -558,10 +585,7 @@ static struct clksrc_clk clk_spi0 = {
.id = 0,
.ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0,
.enable = s5pc100_sclk0_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
+
},
.shift = S5PC100_CLKSRC1_SPI0_SHIFT,
.mask = S5PC100_CLKSRC1_SPI0_MASK,
@@ -577,10 +601,7 @@ static struct clksrc_clk clk_spi1 = {
.id = 1,
.ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1,
.enable = s5pc100_sclk0_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
+ .ops = &s5pc100_clksrc_ops,
},
.shift = S5PC100_CLKSRC1_SPI1_SHIFT,
.mask = S5PC100_CLKSRC1_SPI1_MASK,
@@ -596,10 +617,7 @@ static struct clksrc_clk clk_spi2 = {
.id = 2,
.ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2,
.enable = s5pc100_sclk0_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
+ .ops = &s5pc100_clksrc_ops,
},
.shift = S5PC100_CLKSRC1_SPI2_SHIFT,
.mask = S5PC100_CLKSRC1_SPI2_MASK,
@@ -625,10 +643,7 @@ static struct clksrc_clk clk_uart_uclk1 = {
.id = -1,
.ctrlbit = S5PC100_CLKGATE_SCLK0_UART,
.enable = s5pc100_sclk0_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
+ .ops = &s5pc100_clksrc_ops,
},
.shift = S5PC100_CLKSRC1_UART_SHIFT,
.mask = S5PC100_CLKSRC1_UART_MASK,
@@ -683,10 +698,7 @@ static struct clksrc_clk clk_audio0 = {
.id = 0,
.ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO0,
.enable = s5pc100_sclk1_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
+ .ops = &s5pc100_clksrc_ops,
},
.shift = S5PC100_CLKSRC3_AUDIO0_SHIFT,
.mask = S5PC100_CLKSRC3_AUDIO0_MASK,
@@ -716,10 +728,7 @@ static struct clksrc_clk clk_audio1 = {
.id = 1,
.ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO1,
.enable = s5pc100_sclk1_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
+ .ops = &s5pc100_clksrc_ops,
},
.shift = S5PC100_CLKSRC3_AUDIO1_SHIFT,
.mask = S5PC100_CLKSRC3_AUDIO1_MASK,
@@ -748,10 +757,7 @@ static struct clksrc_clk clk_audio2 = {
.id = 2,
.ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO2,
.enable = s5pc100_sclk1_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
+ .ops = &s5pc100_clksrc_ops,
},
.shift = S5PC100_CLKSRC3_AUDIO2_SHIFT,
.mask = S5PC100_CLKSRC3_AUDIO2_MASK,
@@ -801,10 +807,7 @@ static struct clksrc_clk clk_lcd = {
.id = -1,
.ctrlbit = S5PC100_CLKGATE_SCLK1_LCD,
.enable = s5pc100_sclk1_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
+ .ops = &s5pc100_clksrc_ops,
},
.shift = S5PC100_CLKSRC2_LCD_SHIFT,
.mask = S5PC100_CLKSRC2_LCD_MASK,
@@ -820,10 +823,7 @@ static struct clksrc_clk clk_fimc0 = {
.id = 0,
.ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC0,
.enable = s5pc100_sclk1_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
+ .ops = &s5pc100_clksrc_ops,
},
.shift = S5PC100_CLKSRC2_FIMC0_SHIFT,
.mask = S5PC100_CLKSRC2_FIMC0_MASK,
@@ -839,10 +839,7 @@ static struct clksrc_clk clk_fimc1 = {
.id = 1,
.ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC1,
.enable = s5pc100_sclk1_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
+ .ops = &s5pc100_clksrc_ops,
},
.shift = S5PC100_CLKSRC2_FIMC1_SHIFT,
.mask = S5PC100_CLKSRC2_FIMC1_MASK,
@@ -858,10 +855,7 @@ static struct clksrc_clk clk_fimc2 = {
.id = 2,
.ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC2,
.enable = s5pc100_sclk1_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
+ .ops = &s5pc100_clksrc_ops,
},
.shift = S5PC100_CLKSRC2_FIMC2_SHIFT,
.mask = S5PC100_CLKSRC2_FIMC2_MASK,
@@ -889,10 +883,7 @@ static struct clksrc_clk clk_mmc0 = {
.id = 0,
.ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0,
.enable = s5pc100_sclk0_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
+ .ops = &s5pc100_clksrc_ops,
},
.shift = S5PC100_CLKSRC2_MMC0_SHIFT,
.mask = S5PC100_CLKSRC2_MMC0_MASK,
@@ -908,10 +899,7 @@ static struct clksrc_clk clk_mmc1 = {
.id = 1,
.ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1,
.enable = s5pc100_sclk0_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
+ .ops = &s5pc100_clksrc_ops,
},
.shift = S5PC100_CLKSRC2_MMC1_SHIFT,
.mask = S5PC100_CLKSRC2_MMC1_MASK,
@@ -927,10 +915,7 @@ static struct clksrc_clk clk_mmc2 = {
.id = 2,
.ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2,
.enable = s5pc100_sclk0_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
+ .ops = &s5pc100_clksrc_ops,
},
.shift = S5PC100_CLKSRC2_MMC2_SHIFT,
.mask = S5PC100_CLKSRC2_MMC2_MASK,
@@ -959,10 +944,7 @@ static struct clksrc_clk clk_usbhost = {
.id = -1,
.ctrlbit = S5PC100_CLKGATE_SCLK0_USBHOST,
.enable = s5pc100_sclk0_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
+ .ops = &s5pc100_clksrc_ops,
},
.shift = S5PC100_CLKSRC1_UHOST_SHIFT,
.mask = S5PC100_CLKSRC1_UHOST_MASK,
diff --git a/arch/arm/plat-samsung/clock-clksrc.c b/arch/arm/plat-samsung/clock-clksrc.c
index 5872f0b..ad4e872 100644
--- a/arch/arm/plat-samsung/clock-clksrc.c
+++ b/arch/arm/plat-samsung/clock-clksrc.c
@@ -150,20 +150,21 @@ void __init_or_cpufreq s3c_set_clksrc(struct clksrc_clk *clk)
clk_get_rate(&clk->clk));
}
+static struct clk_ops clksrc_ops = {
+ .set_parent = s3c_setparent_clksrc,
+ .get_rate = s3c_getrate_clksrc,
+ .set_rate = s3c_setrate_clksrc,
+ .round_rate = s3c_roundrate_clksrc,
+};
+
void __init s3c_register_clksrc(struct clksrc_clk *clksrc, int size)
{
int ret;
for (; size > 0; size--, clksrc++) {
/* fill in the default functions */
- if (!clksrc->clk.set_parent)
- clksrc->clk.set_parent = s3c_setparent_clksrc;
- if (!clksrc->clk.get_rate)
- clksrc->clk.get_rate = s3c_getrate_clksrc;
- if (!clksrc->clk.set_rate)
- clksrc->clk.set_rate = s3c_setrate_clksrc;
- if (!clksrc->clk.round_rate)
- clksrc->clk.round_rate = s3c_roundrate_clksrc;
+ if (!clksrc->clk.ops)
+ clksrc->clk.ops = &clksrc_ops;
s3c_set_clksrc(clksrc);
diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
index d86af84..43324af 100644
--- a/arch/arm/plat-samsung/include/plat/clock.h
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -11,6 +11,30 @@
#include <linux/spinlock.h>
+struct clk;
+
+/**
+ * struct clk_ops - standard clock operations
+ * @set_rate: set the clock rate, see clk_set_rate().
+ * @get_rate: get the clock rate, see clk_get_rate().
+ * @round_rate: round a given clock rate, see clk_round_rate().
+ * @set_parent: set the clock's parent, see clk_set_parent().
+ *
+ * Group the common clock implementations together so that we
+ * don't have to keep setting the same fiels again. We leave
+ * enable in struct clk.
+ *
+ * Adding an extra layer of indirection into the process should
+ * not be a problem as it is unlikely these operations are going
+ * to need to be called quickly.
+ */
+struct clk_ops {
+ int (*set_rate)(struct clk *c, unsigned long rate);
+ unsigned long (*get_rate)(struct clk *c);
+ unsigned long (*round_rate)(struct clk *c, unsigned long rate);
+ int (*set_parent)(struct clk *c, struct clk *parent);
+};
+
struct clk {
struct list_head list;
struct module *owner;
@@ -21,11 +45,8 @@ struct clk {
unsigned long rate;
unsigned long ctrlbit;
+ struct clk_ops *ops;
int (*enable)(struct clk *, int enable);
- int (*set_rate)(struct clk *c, unsigned long rate);
- unsigned long (*get_rate)(struct clk *c);
- unsigned long (*round_rate)(struct clk *c, unsigned long rate);
- int (*set_parent)(struct clk *c, struct clk *parent);
};
/* other clocks which may be registered by board support */
--
1.5.6.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [[clock v2]] ARM: S3C64XX: Fixup .reg_src and .reg_div with named initialisers
2009-12-08 2:07 Samsung clock updates v2 Ben Dooks
` (6 preceding siblings ...)
2009-12-08 2:07 ` [[clock v2]] ARM: SAMSUNG: Reduce size of struct clk Ben Dooks
@ 2009-12-08 2:07 ` Ben Dooks
7 siblings, 0 replies; 9+ messages in thread
From: Ben Dooks @ 2009-12-08 2:07 UTC (permalink / raw)
To: linux-arm-kernel
Change these two fields to have named initialisers as per the
review comments from Kyungmin Park.
sed used:
s@\.reg_src\(.*\)=\(.*\){\(.*\),\(.*\),\(.*\)}@.reg_src\1=\2{ .reg =\3, .shift =\4, .size =\5 }@g
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
arch/arm/plat-s3c64xx/s3c6400-clock.c | 28 ++++++++++++++--------------
1 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 79e4bd7..8f6a0d1 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -68,7 +68,7 @@ static struct clksrc_clk clk_mout_apll = {
.name = "mout_apll",
.id = -1,
},
- .reg_src = { S3C_CLK_SRC, 0, 1 },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 0, .size = 1 },
.sources = &clk_src_apll,
};
@@ -92,7 +92,7 @@ static struct clksrc_clk clk_mout_epll = {
.name = "mout_epll",
.id = -1,
},
- .reg_src = { S3C_CLK_SRC, 2, 1 },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 2, .size = 1 },
.sources = &clk_src_epll,
};
@@ -111,7 +111,7 @@ static struct clksrc_clk clk_mout_mpll = {
.name = "mout_mpll",
.id = -1,
},
- .reg_src = { S3C_CLK_SRC, 1, 1 },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 1, .size = 1 },
.sources = &clk_src_mpll,
};
@@ -317,7 +317,7 @@ static struct clksrc_clk clksrcs[] = {
.ctrlbit = S3C_CLKCON_SCLK_MMC0,
.enable = s3c64xx_sclk_ctrl,
},
- .reg_src = { S3C_CLK_SRC, 18, 2 },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 18, .size = 2 },
.reg_div = { S3C_CLK_DIV1, 0, 4 },
.sources = &clkset_spi_mmc,
}, {
@@ -327,7 +327,7 @@ static struct clksrc_clk clksrcs[] = {
.ctrlbit = S3C_CLKCON_SCLK_MMC1,
.enable = s3c64xx_sclk_ctrl,
},
- .reg_src = { S3C_CLK_SRC, 20, 2 },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 20, .size = 2 },
.reg_div = { S3C_CLK_DIV1, 4, 4 },
.sources = &clkset_spi_mmc,
}, {
@@ -337,7 +337,7 @@ static struct clksrc_clk clksrcs[] = {
.ctrlbit = S3C_CLKCON_SCLK_MMC2,
.enable = s3c64xx_sclk_ctrl,
},
- .reg_src = { S3C_CLK_SRC, 22, 2 },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 22, .size = 2 },
.reg_div = { S3C_CLK_DIV1, 8, 4 },
.sources = &clkset_spi_mmc,
}, {
@@ -347,7 +347,7 @@ static struct clksrc_clk clksrcs[] = {
.ctrlbit = S3C_CLKCON_SCLK_UHOST,
.enable = s3c64xx_sclk_ctrl,
},
- .reg_src = { S3C_CLK_SRC, 5, 2 },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 5, .size = 2 },
.reg_div = { S3C_CLK_DIV1, 20, 4 },
.sources = &clkset_uhost,
}, {
@@ -357,7 +357,7 @@ static struct clksrc_clk clksrcs[] = {
.ctrlbit = S3C_CLKCON_SCLK_UART,
.enable = s3c64xx_sclk_ctrl,
},
- .reg_src = { S3C_CLK_SRC, 13, 1 },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1 },
.reg_div = { S3C_CLK_DIV2, 16, 4 },
.sources = &clkset_uart,
}, {
@@ -368,7 +368,7 @@ static struct clksrc_clk clksrcs[] = {
.ctrlbit = S3C_CLKCON_SCLK_SPI0,
.enable = s3c64xx_sclk_ctrl,
},
- .reg_src = { S3C_CLK_SRC, 14, 2 },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 },
.reg_div = { S3C_CLK_DIV2, 0, 4 },
.sources = &clkset_spi_mmc,
}, {
@@ -378,7 +378,7 @@ static struct clksrc_clk clksrcs[] = {
.ctrlbit = S3C_CLKCON_SCLK_SPI1,
.enable = s3c64xx_sclk_ctrl,
},
- .reg_src = { S3C_CLK_SRC, 16, 2 },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 },
.reg_div = { S3C_CLK_DIV2, 4, 4 },
.sources = &clkset_spi_mmc,
}, {
@@ -388,7 +388,7 @@ static struct clksrc_clk clksrcs[] = {
.ctrlbit = S3C_CLKCON_SCLK_AUDIO0,
.enable = s3c64xx_sclk_ctrl,
},
- .reg_src = { S3C_CLK_SRC, 7, 3 },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 7, .size = 3 },
.reg_div = { S3C_CLK_DIV2, 8, 4 },
.sources = &clkset_audio0,
}, {
@@ -398,7 +398,7 @@ static struct clksrc_clk clksrcs[] = {
.ctrlbit = S3C_CLKCON_SCLK_AUDIO1,
.enable = s3c64xx_sclk_ctrl,
},
- .reg_src = { S3C_CLK_SRC, 10, 3 },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 10, .size = 3 },
.reg_div = { S3C_CLK_DIV2, 12, 4 },
.sources = &clkset_audio1,
}, {
@@ -408,7 +408,7 @@ static struct clksrc_clk clksrcs[] = {
.ctrlbit = S3C_CLKCON_SCLK_IRDA,
.enable = s3c64xx_sclk_ctrl,
},
- .reg_src = { S3C_CLK_SRC, 24, 2 },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 24, .size = 2 },
.reg_div = { S3C_CLK_DIV2, 20, 4 },
.sources = &clkset_irda,
}, {
@@ -419,7 +419,7 @@ static struct clksrc_clk clksrcs[] = {
.enable = s3c64xx_sclk_ctrl,
},
.reg_div = { S3C_CLK_DIV0, 20, 4 },
- .reg_src = { NULL, 0, 0 },
+ .reg_src = { .reg = NULL, .shift = 0, .size = 0 },
.sources = &clkset_camif,
},
};
--
1.5.6.5
^ permalink raw reply related [flat|nested] 9+ messages in thread