From: khilman@deeprootsystems.com (Kevin Hilman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/35] davinci updates queued for 2.6.34
Date: Wed, 6 Jan 2010 10:31:42 -0800 [thread overview]
Message-ID: <1262802737-6601-1-git-send-email-khilman@deeprootsystems.com> (raw)
Here's a set of DaVinci updates for review.
Apologies for the large series, I've been meaning to send these in
smaller batches, but hd lots to queue up from over the holidays.
Pending any review comments, these will be submitted to Linus during
the next merge window.
Kevin
Chaithrika U S (1):
davinci: clock: Check CLK_PSC flag before disabling PSC
Nageswari Srinivasan (2):
davinci: add support for CDCE949 clock synthesizer
davinci: add CDCE949 support on DM6467 EVM
Sandeep Paulraj (1):
DaVinci: DM365: Changing default queue for DM365.
Sekhar Nori (17):
davinci: da8xx/omapl1: add support for the second sysconfig module
davinci: move PLL wait time values to clock.h
davinci: move DDR2 controller defines to memory.h
davinci: move PSC register definitions from psc.c to psc.h
davinci: make it possible to include clock.h and psc.h in assembly
code
davinci: cpuidle: move mapping of DDR2 controller registers out of
driver
davinci: da850/omap-l138: unlock PLL registers during init
davinci: da850/omap-l138: create static map for SRAM
davinci: explain CLOCK_TICK_RATE of 27MHz in include/mach/timex.h
davinci: board-dm646x-evm.c: arrange related code together
davinci: add support for DM6467T EVM
davinci: clock framework: remove spinlock usage
davinci: make /proc/davinci_clocks display multi-rooted clock tree
davinci: move /proc/davinci_clocks to debugfs
davinci: add power management support
davinci: da850/omap-l138: add support for SoC suspend
davinci: da850/omap-l138 EVM: register for suspend support
Sriramakrishnan (3):
TI Davinci EMAC : Re-use driver for other platforms.
TI Davinci EMAC : add platform specific interrupt enable/disable
logic.
TI Davinci EMAC : Abstract Buffer address translation logic.
Sudhakar Rajashekhara (11):
davinci: da850/omap-l138: Modify NOR partition info
davinci: da850/omap-l138: Enable 4-bit ecc
davinci: Correct return value of edma_alloc_channel api
davinci: Keep count of channel controllers on a platform
davinci: Fix edma_alloc_channel api for EDMA_CHANNEL_ANY case
davinci: build list of unused EDMA events dynamically
davinci: support for EDMA resource sharing
davinci: da8xx/omap-l1xx: Add EDMA platform data for da850/omap-l138
davinci: da830/omapl137: Specify reserved channels/slots
davinci: da850/omapl138: Specify reserved channels/slots
davinci: dm646x: Specify reserved EDMA channel/slots for DM646x
arch/arm/mach-davinci/Kconfig | 4 +
arch/arm/mach-davinci/Makefile | 3 +-
arch/arm/mach-davinci/board-da830-evm.c | 4 +-
arch/arm/mach-davinci/board-da850-evm.c | 34 +++-
arch/arm/mach-davinci/board-dm646x-evm.c | 143 +++++++++----
arch/arm/mach-davinci/cdce949.c | 289 ++++++++++++++++++++++++++
arch/arm/mach-davinci/clock.c | 143 +++++--------
arch/arm/mach-davinci/clock.h | 29 ++-
arch/arm/mach-davinci/common.c | 2 +-
arch/arm/mach-davinci/cpuidle.c | 38 +---
arch/arm/mach-davinci/da830.c | 10 +-
arch/arm/mach-davinci/da850.c | 86 +++++++--
arch/arm/mach-davinci/devices-da8xx.c | 210 +++++++++++++++++--
arch/arm/mach-davinci/dm355.c | 12 +-
arch/arm/mach-davinci/dm365.c | 6 +-
arch/arm/mach-davinci/dm644x.c | 18 +--
arch/arm/mach-davinci/dm646x.c | 44 +++--
arch/arm/mach-davinci/dma.c | 101 ++++++++--
arch/arm/mach-davinci/include/mach/cdce949.h | 19 ++
arch/arm/mach-davinci/include/mach/cpuidle.h | 1 +
arch/arm/mach-davinci/include/mach/da8xx.h | 18 ++-
arch/arm/mach-davinci/include/mach/dm365.h | 2 +-
arch/arm/mach-davinci/include/mach/dm644x.h | 2 +-
arch/arm/mach-davinci/include/mach/dm646x.h | 4 +-
arch/arm/mach-davinci/include/mach/edma.h | 4 +-
arch/arm/mach-davinci/include/mach/emac.h | 36 ----
arch/arm/mach-davinci/include/mach/memory.h | 5 +
arch/arm/mach-davinci/include/mach/mux.h | 1 +
arch/arm/mach-davinci/include/mach/pm.h | 54 +++++
arch/arm/mach-davinci/include/mach/psc.h | 15 ++
arch/arm/mach-davinci/include/mach/timex.h | 7 +-
arch/arm/mach-davinci/pm.c | 158 ++++++++++++++
arch/arm/mach-davinci/psc.c | 17 +-
arch/arm/mach-davinci/sleep.S | 224 ++++++++++++++++++++
drivers/net/Kconfig | 2 +-
drivers/net/davinci_emac.c | 55 ++++--
include/linux/davinci_emac.h | 39 ++++
37 files changed, 1494 insertions(+), 345 deletions(-)
create mode 100644 arch/arm/mach-davinci/cdce949.c
create mode 100644 arch/arm/mach-davinci/include/mach/cdce949.h
delete mode 100644 arch/arm/mach-davinci/include/mach/emac.h
create mode 100644 arch/arm/mach-davinci/include/mach/pm.h
create mode 100644 arch/arm/mach-davinci/pm.c
create mode 100644 arch/arm/mach-davinci/sleep.S
create mode 100644 include/linux/davinci_emac.h
next reply other threads:[~2010-01-06 18:31 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-06 18:31 Kevin Hilman [this message]
2010-01-06 18:31 ` [PATCH 01/35] davinci: da8xx/omapl1: add support for the second sysconfig module Kevin Hilman
2010-01-06 18:31 ` [PATCH 02/35] davinci: move PLL wait time values to clock.h Kevin Hilman
2010-01-06 18:31 ` [PATCH 03/35] davinci: move DDR2 controller defines to memory.h Kevin Hilman
2010-01-06 18:31 ` [PATCH 04/35] davinci: move PSC register definitions from psc.c to psc.h Kevin Hilman
2010-01-06 18:31 ` [PATCH 05/35] davinci: make it possible to include clock.h and psc.h in assembly code Kevin Hilman
2010-01-06 18:31 ` [PATCH 06/35] davinci: cpuidle: move mapping of DDR2 controller registers out of driver Kevin Hilman
2010-01-06 18:31 ` [PATCH 07/35] davinci: da850/omap-l138: unlock PLL registers during init Kevin Hilman
2010-01-06 18:31 ` [PATCH 08/35] davinci: da850/omap-l138: create static map for SRAM Kevin Hilman
2010-01-06 18:31 ` [PATCH 09/35] davinci: explain CLOCK_TICK_RATE of 27MHz in include/mach/timex.h Kevin Hilman
2010-01-06 18:31 ` [PATCH 10/35] davinci: board-dm646x-evm.c: arrange related code together Kevin Hilman
2010-01-06 18:31 ` [PATCH 11/35] davinci: add support for DM6467T EVM Kevin Hilman
2010-01-06 18:31 ` [PATCH 12/35] davinci: clock framework: remove spinlock usage Kevin Hilman
2010-01-06 18:31 ` [PATCH 13/35] davinci: make /proc/davinci_clocks display multi-rooted clock tree Kevin Hilman
2010-01-06 18:31 ` [PATCH 14/35] davinci: move /proc/davinci_clocks to debugfs Kevin Hilman
2010-01-06 18:31 ` [PATCH 15/35] davinci: da850/omap-l138: Modify NOR partition info Kevin Hilman
2010-01-06 18:31 ` [PATCH 16/35] davinci: da850/omap-l138: Enable 4-bit ecc Kevin Hilman
2010-01-06 18:31 ` [PATCH 17/35] TI Davinci EMAC : Re-use driver for other platforms Kevin Hilman
2010-01-06 18:32 ` [PATCH 18/35] TI Davinci EMAC : add platform specific interrupt enable/disable logic Kevin Hilman
2010-01-06 18:32 ` [PATCH 19/35] TI Davinci EMAC : Abstract Buffer address translation logic Kevin Hilman
2010-01-06 18:32 ` [PATCH 20/35] davinci: clock: Check CLK_PSC flag before disabling PSC Kevin Hilman
2010-01-06 18:32 ` [PATCH 21/35] DaVinci: DM365: Changing default queue for DM365 Kevin Hilman
2010-01-06 18:32 ` [PATCH 22/35] davinci: add power management support Kevin Hilman
2010-01-06 18:32 ` [PATCH 23/35] davinci: da850/omap-l138: add support for SoC suspend Kevin Hilman
2010-01-06 18:32 ` [PATCH 24/35] davinci: da850/omap-l138 EVM: register for suspend support Kevin Hilman
2010-01-06 18:32 ` [PATCH 25/35] davinci: add support for CDCE949 clock synthesizer Kevin Hilman
2010-01-06 18:32 ` [PATCH 26/35] davinci: add CDCE949 support on DM6467 EVM Kevin Hilman
2010-01-06 18:32 ` [PATCH 27/35] davinci: Correct return value of edma_alloc_channel api Kevin Hilman
2010-01-06 18:32 ` [PATCH 28/35] davinci: Keep count of channel controllers on a platform Kevin Hilman
2010-01-06 18:32 ` [PATCH 29/35] davinci: Fix edma_alloc_channel api for EDMA_CHANNEL_ANY case Kevin Hilman
2010-01-06 18:32 ` [PATCH 30/35] davinci: build list of unused EDMA events dynamically Kevin Hilman
2010-01-06 18:32 ` [PATCH 31/35] davinci: support for EDMA resource sharing Kevin Hilman
2010-01-06 18:32 ` [PATCH 32/35] davinci: da8xx/omap-l1xx: Add EDMA platform data for da850/omap-l138 Kevin Hilman
2010-01-06 18:32 ` [PATCH 33/35] davinci: da830/omapl137: Specify reserved channels/slots Kevin Hilman
2010-01-06 18:32 ` [PATCH 34/35] davinci: da850/omapl138: " Kevin Hilman
2010-01-06 18:32 ` [PATCH 35/35] davinci: dm646x: Specify reserved EDMA channel/slots for DM646x Kevin Hilman
2010-01-08 17:06 ` [PATCH 12/35] davinci: clock framework: remove spinlock usage Russell King - ARM Linux
2010-01-11 15:27 ` Kevin Hilman
2010-01-10 13:59 ` [PATCH 00/35] davinci updates queued for 2.6.34 Russell King - ARM Linux
2010-01-11 15:31 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1262802737-6601-1-git-send-email-khilman@deeprootsystems.com \
--to=khilman@deeprootsystems.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).