From: khilman@deeprootsystems.com (Kevin Hilman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 15/35] davinci: da850/omap-l138: Modify NOR partition info
Date: Wed, 6 Jan 2010 10:31:57 -0800 [thread overview]
Message-ID: <1262802737-6601-16-git-send-email-khilman@deeprootsystems.com> (raw)
In-Reply-To: <1262802737-6601-15-git-send-email-khilman@deeprootsystems.com>
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
On DA850/OMAP-L138, NOR flash partition was starting from offset
ZERO erasing the UBL and u-boot when the complete NOR is erased.
This patch moves the start of the partition to 512K, after the
bootloaders and u-boot env variables.
This patch also creates a new partition on NOR Flash to store
Linux kernel image.
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
arch/arm/mach-davinci/board-da850-evm.c | 14 +++++++++++++-
1 files changed, 13 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index dba2241..ac3b5a3 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -46,8 +46,20 @@
static struct mtd_partition da850_evm_norflash_partition[] = {
{
- .name = "NOR filesystem",
+ .name = "bootloaders + env",
.offset = 0,
+ .size = SZ_512K,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0,
+ },
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0,
},
--
1.6.6.rc2.1.g42108
next prev parent reply other threads:[~2010-01-06 18:31 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-06 18:31 [PATCH 00/35] davinci updates queued for 2.6.34 Kevin Hilman
2010-01-06 18:31 ` [PATCH 01/35] davinci: da8xx/omapl1: add support for the second sysconfig module Kevin Hilman
2010-01-06 18:31 ` [PATCH 02/35] davinci: move PLL wait time values to clock.h Kevin Hilman
2010-01-06 18:31 ` [PATCH 03/35] davinci: move DDR2 controller defines to memory.h Kevin Hilman
2010-01-06 18:31 ` [PATCH 04/35] davinci: move PSC register definitions from psc.c to psc.h Kevin Hilman
2010-01-06 18:31 ` [PATCH 05/35] davinci: make it possible to include clock.h and psc.h in assembly code Kevin Hilman
2010-01-06 18:31 ` [PATCH 06/35] davinci: cpuidle: move mapping of DDR2 controller registers out of driver Kevin Hilman
2010-01-06 18:31 ` [PATCH 07/35] davinci: da850/omap-l138: unlock PLL registers during init Kevin Hilman
2010-01-06 18:31 ` [PATCH 08/35] davinci: da850/omap-l138: create static map for SRAM Kevin Hilman
2010-01-06 18:31 ` [PATCH 09/35] davinci: explain CLOCK_TICK_RATE of 27MHz in include/mach/timex.h Kevin Hilman
2010-01-06 18:31 ` [PATCH 10/35] davinci: board-dm646x-evm.c: arrange related code together Kevin Hilman
2010-01-06 18:31 ` [PATCH 11/35] davinci: add support for DM6467T EVM Kevin Hilman
2010-01-06 18:31 ` [PATCH 12/35] davinci: clock framework: remove spinlock usage Kevin Hilman
2010-01-06 18:31 ` [PATCH 13/35] davinci: make /proc/davinci_clocks display multi-rooted clock tree Kevin Hilman
2010-01-06 18:31 ` [PATCH 14/35] davinci: move /proc/davinci_clocks to debugfs Kevin Hilman
2010-01-06 18:31 ` Kevin Hilman [this message]
2010-01-06 18:31 ` [PATCH 16/35] davinci: da850/omap-l138: Enable 4-bit ecc Kevin Hilman
2010-01-06 18:31 ` [PATCH 17/35] TI Davinci EMAC : Re-use driver for other platforms Kevin Hilman
2010-01-06 18:32 ` [PATCH 18/35] TI Davinci EMAC : add platform specific interrupt enable/disable logic Kevin Hilman
2010-01-06 18:32 ` [PATCH 19/35] TI Davinci EMAC : Abstract Buffer address translation logic Kevin Hilman
2010-01-06 18:32 ` [PATCH 20/35] davinci: clock: Check CLK_PSC flag before disabling PSC Kevin Hilman
2010-01-06 18:32 ` [PATCH 21/35] DaVinci: DM365: Changing default queue for DM365 Kevin Hilman
2010-01-06 18:32 ` [PATCH 22/35] davinci: add power management support Kevin Hilman
2010-01-06 18:32 ` [PATCH 23/35] davinci: da850/omap-l138: add support for SoC suspend Kevin Hilman
2010-01-06 18:32 ` [PATCH 24/35] davinci: da850/omap-l138 EVM: register for suspend support Kevin Hilman
2010-01-06 18:32 ` [PATCH 25/35] davinci: add support for CDCE949 clock synthesizer Kevin Hilman
2010-01-06 18:32 ` [PATCH 26/35] davinci: add CDCE949 support on DM6467 EVM Kevin Hilman
2010-01-06 18:32 ` [PATCH 27/35] davinci: Correct return value of edma_alloc_channel api Kevin Hilman
2010-01-06 18:32 ` [PATCH 28/35] davinci: Keep count of channel controllers on a platform Kevin Hilman
2010-01-06 18:32 ` [PATCH 29/35] davinci: Fix edma_alloc_channel api for EDMA_CHANNEL_ANY case Kevin Hilman
2010-01-06 18:32 ` [PATCH 30/35] davinci: build list of unused EDMA events dynamically Kevin Hilman
2010-01-06 18:32 ` [PATCH 31/35] davinci: support for EDMA resource sharing Kevin Hilman
2010-01-06 18:32 ` [PATCH 32/35] davinci: da8xx/omap-l1xx: Add EDMA platform data for da850/omap-l138 Kevin Hilman
2010-01-06 18:32 ` [PATCH 33/35] davinci: da830/omapl137: Specify reserved channels/slots Kevin Hilman
2010-01-06 18:32 ` [PATCH 34/35] davinci: da850/omapl138: " Kevin Hilman
2010-01-06 18:32 ` [PATCH 35/35] davinci: dm646x: Specify reserved EDMA channel/slots for DM646x Kevin Hilman
2010-01-08 17:06 ` [PATCH 12/35] davinci: clock framework: remove spinlock usage Russell King - ARM Linux
2010-01-11 15:27 ` Kevin Hilman
2010-01-10 13:59 ` [PATCH 00/35] davinci updates queued for 2.6.34 Russell King - ARM Linux
2010-01-11 15:31 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1262802737-6601-16-git-send-email-khilman@deeprootsystems.com \
--to=khilman@deeprootsystems.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).