From: maramaopercheseimorto@gmail.com (Alberto Panizzo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4] mfd: mc13783: Take care of semantic inversion between read and write value of two bits in POWER_MISCELLANEUS register.
Date: Fri, 08 Jan 2010 11:53:31 +0100 [thread overview]
Message-ID: <1262948011.2050.3.camel@climbing-alby> (raw)
In-Reply-To: <20100105195520.GA8555@pengutronix.de>
Sorry for late response.. as Uwe said, we have discuss about this
and I will prepare another patch that involve the regulator driver.
Alberto!
Il giorno mar, 05/01/2010 alle 20.55 +0100, Uwe Kleine-K?nig ha scritto:
> On Tue, Jan 05, 2010 at 07:15:42PM +0100, Samuel Ortiz wrote:
> > > @@ -187,6 +190,13 @@ int mc13783_reg_write(struct mc13783 *mc13783, unsigned int offset, u32 val)
> > >
> > > buf = 1 << 31 | offset << MC13783_REGOFFSET_SHIFT | val;
> > >
> > > + /* Take care of table 4-24 in Freescale MC13783IGPLDRM.pdf making
> > > + * the assumption that PWGTnDRV signals controls core power supplies
> > > + * that software must not disable. */
> > > + if (offset == MC13783_REG_POWER_MISCELLANEOUS)
> > > + buf &= ~(MC13783_REGCTRL_PWGT1SPIEN |
> > > + MC13783_REGCTRL_PWGT2SPIEN);
> > > +
> > Although I see where you want to go, I dont really enjoy that solution.
> > I would prefere to have specific register write/rmw routines for
> > MC13783_REG_POWER_MISCELLANEOUS, and at the same time forbid to access the
> > latter from the current mc13783_reg_* API.
> Ack. This is what I already suggested in
>
> http://thread.gmane.org/gmane.linux.kernel/927112/focus=930317
>
> (This happend to be a reply to patch 2/4 as I replied to Alberto's ping
> for patches 1 and 2.)
>
> Best regards
> Uwe
>
next prev parent reply other threads:[~2010-01-08 10:53 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-14 16:41 [PATCH 0/4 v2] Patch series for introduce voltage selecting for mc13783 regulators Alberto Panizzo
2009-12-14 17:12 ` [PATCH 1/4] mfd: mc13783: Take care of semantic inversion between read and write value of two bits in POWER_MISCELLANEUS register Alberto Panizzo
2009-12-14 17:18 ` [PATCH 2/4] mfd: mc13783: When probing, unlock the mc13783 before subsystems initialisation Alberto Panizzo
2009-12-14 17:26 ` [PATCH 3/4] regulator: add voltage selection capability to mc13783 regulators v2 Alberto Panizzo
2009-12-14 17:53 ` [PATCH 4/4] regulator: mc13783-regulator: correct the probing time Alberto Panizzo
2009-12-15 14:50 ` Liam Girdwood
2009-12-15 14:52 ` Mark Brown
2009-12-15 14:54 ` [PATCH 3/4] regulator: add voltage selection capability to mc13783 regulators v2 Liam Girdwood
2009-12-18 16:12 ` [PATCH 2/4] mfd: mc13783: When probing, unlock the mc13783 before subsystems initialisation Alberto Panizzo
2009-12-19 20:18 ` Uwe Kleine-König
2009-12-20 13:48 ` Alberto Panizzo
2009-12-20 18:49 ` Uwe Kleine-König
2009-12-20 22:50 ` Alberto Panizzo
2010-01-08 11:13 ` Alberto Panizzo
2010-01-08 11:44 ` Samuel Ortiz
[not found] ` <4B26799F.1020507@ru.mvista.com>
2009-12-14 17:59 ` [PATCH 1/4] mfd: mc13783: Take care of semantic inversion between read and write value of two bits in POWER_MISCELLANEUS register Alberto Panizzo
2010-01-05 18:15 ` Samuel Ortiz
2010-01-05 19:55 ` Uwe Kleine-König
2010-01-08 10:53 ` Alberto Panizzo [this message]
-- strict thread matches above, loose matches on Subject: below --
2009-12-12 16:37 [PATCH 0/4] Patch series for introduce voltage selecting for mc13783 regulators Alberto Panizzo
2009-12-12 16:48 ` [PATCH 1/4] mfd: mc13783: Take care of semantic inversion between read and write value of two bits in POWER_MISCELLANEUS register Alberto Panizzo
2009-12-12 18:11 ` Mark Brown
2009-12-13 19:56 ` Uwe Kleine-König
2009-12-14 10:14 ` Alberto Panizzo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1262948011.2050.3.camel@climbing-alby \
--to=maramaopercheseimorto@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox