From: dwalker@codeaurora.org (Daniel Walker)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC 16/18] arm: msm: add arch_has_speculative_dfetch()
Date: Mon, 11 Jan 2010 16:28:53 -0800 [thread overview]
Message-ID: <1263256133.26505.49.camel@c-dwalke-linux.qualcomm.com> (raw)
In-Reply-To: <20100111233356.GJ7925@n2100.arm.linux.org.uk>
On Mon, 2010-01-11 at 23:33 +0000, Russell King - ARM Linux wrote:
> On Mon, Jan 11, 2010 at 02:47:35PM -0800, Daniel Walker wrote:
> > From: Steve Muckle <smuckle@quicinc.com>
> >
> > The Scorpion CPU speculatively reads data into the cache. This
> > may occur while a region of memory is being written via DMA, so
> > that region must be invalidated when it is brought under CPU
> > control after the DMA transaction finishes, assuming the DMA
> > was either bidirectional or from the device.
> >
> > Currently both a clean and invalidate are being done for
> > DMA_BIDIRECTIONAL in dma_unmap_single. Only an invalidate should be
> > required here. There are drivers that currently rely on the clean
> > however so this will be removed when those drivers are updated.
>
> NAK. There are patches around (and potentially queued) for the next
> merge window which properly address this.
Do you have any hints on who's doing the development ?
Daniel
next prev parent reply other threads:[~2010-01-12 0:28 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-11 22:47 [RFC 00/18] generic arm needed for msm Daniel Walker
2010-01-11 22:47 ` [RFC 01/18] arm: msm: allow ARCH_MSM to have v7 cpus Daniel Walker
2010-01-11 22:47 ` [RFC 02/18] arm: msm: add oprofile pmu support Daniel Walker
2010-01-11 22:47 ` [RFC 03/18] arm: boot: remove old ARM ID for QSD Daniel Walker
2010-01-15 21:26 ` Russell King - ARM Linux
2010-01-11 22:47 ` [RFC 04/18] arm: cache-l2x0: add l2x0 suspend and resume functions Daniel Walker
2010-01-11 23:44 ` Russell King - ARM Linux
2010-01-12 0:52 ` Ruan, Willie
2010-01-11 22:47 ` [RFC 05/18] arm: msm: implement ioremap_strongly_ordered Daniel Walker
2010-01-11 23:37 ` Russell King - ARM Linux
2010-01-28 23:04 ` Larry Bassel
2010-02-03 14:59 ` Russell King - ARM Linux
2010-01-11 22:47 ` [RFC 06/18] arm: msm: implement proper dmb() for 7x27 Daniel Walker
2010-01-11 23:39 ` Russell King - ARM Linux
2010-01-11 23:45 ` Daniel Walker
2010-01-12 0:01 ` Russell King - ARM Linux
2010-01-19 17:28 ` Jamie Lokier
2010-01-19 18:04 ` Russell King - ARM Linux
2010-01-19 21:12 ` Jamie Lokier
2010-01-19 23:11 ` Russell King - ARM Linux
2010-01-19 17:16 ` Jamie Lokier
2010-01-11 22:47 ` [RFC 07/18] arm: mm: retry on QSD icache parity errors Daniel Walker
2010-01-18 18:42 ` Ashwin Chaugule
2010-01-19 16:16 ` Ashwin Chaugule
2010-01-11 22:47 ` [RFC 08/18] arm: msm: set L2CR1 to enable prefetch and burst on Scorpion Daniel Walker
2010-01-11 23:45 ` Russell King - ARM Linux
2010-01-12 10:51 ` [RFC 08/18] arm: msm: set L2CR1 to enable prefetch and burston Scorpion Catalin Marinas
2010-01-12 11:23 ` Shilimkar, Santosh
2010-01-12 11:44 ` Russell King - ARM Linux
2010-01-12 13:32 ` [RFC 08/18] arm: msm: set L2CR1 to enable prefetch and burstonScorpion Catalin Marinas
2010-01-12 13:58 ` Russell King - ARM Linux
2010-01-12 14:41 ` [RFC 08/18] arm: msm: set L2CR1 to enable prefetch andburstonScorpion Catalin Marinas
2010-01-12 18:23 ` Daniel Walker
2010-01-13 10:36 ` Catalin Marinas
2010-01-19 17:38 ` Jamie Lokier
2010-01-13 6:14 ` [RFC 08/18] arm: msm: set L2CR1 to enable prefetch and burstonScorpion Shilimkar, Santosh
2010-01-12 20:21 ` [RFC 08/18] arm: msm: set L2CR1 to enable prefetch and burston Scorpion Nicolas Pitre
2010-01-11 22:47 ` [RFC 09/18] arm: mm: support error reporting in L1/L2 caches on QSD Daniel Walker
2010-01-11 22:47 ` [RFC 10/18] arm: mm: enable L2X0 to use L2 cache on MSM7X27 Daniel Walker
2010-01-11 22:47 ` [RFC 11/18] arm: msm: add ARCH_MSM_SCORPION to CPU_V7 Daniel Walker
2010-01-11 23:13 ` Russell King - ARM Linux
2010-01-11 23:17 ` Daniel Walker
2010-01-11 22:47 ` [RFC 12/18] arm: msm: Enable frequency scaling Daniel Walker
2010-01-11 22:47 ` [RFC 13/18] arm: msm: define HAVE_CLK for ARCH_MSM Daniel Walker
2010-01-11 22:47 ` [RFC 14/18] arm: msm: add v7 support for compiler version-4.1.1 Daniel Walker
2010-01-11 23:07 ` Russell King - ARM Linux
2010-01-11 22:47 ` [RFC 15/18] arm: vfp: Add additional vfp interfaces Daniel Walker
2010-01-11 22:47 ` [RFC 16/18] arm: msm: add arch_has_speculative_dfetch() Daniel Walker
2010-01-11 23:33 ` Russell King - ARM Linux
2010-01-12 0:28 ` Daniel Walker [this message]
2010-01-12 8:59 ` Russell King - ARM Linux
2010-01-11 22:47 ` [RFC 17/18] arm: mm: Add SW emulation for ARM domain manager feature Daniel Walker
2010-01-25 16:40 ` Catalin Marinas
2010-01-25 17:04 ` Nicolas Pitre
2010-01-25 18:25 ` Daniel Walker
2010-03-22 18:11 ` Daniel Walker
2010-03-22 18:58 ` Nicolas Pitre
2010-03-22 20:01 ` Daniel Walker
2010-03-22 20:32 ` Nicolas Pitre
2010-03-23 10:04 ` Catalin Marinas
2010-01-11 22:47 ` [RFC 18/18] arm: mm: qsd8x50: Fix incorrect permission faults Daniel Walker
2010-01-11 23:11 ` Russell King - ARM Linux
2010-01-19 17:10 ` Jamie Lokier
2010-01-19 17:33 ` Daniel Walker
2010-01-19 17:43 ` Jamie Lokier
2010-01-19 17:49 ` Daniel Walker
2010-01-19 18:09 ` Russell King - ARM Linux
2010-02-04 0:09 ` David Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1263256133.26505.49.camel@c-dwalke-linux.qualcomm.com \
--to=dwalker@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).