From mboxrd@z Thu Jan 1 00:00:00 1970 From: broonie@opensource.wolfsonmicro.com (Mark Brown) Date: Wed, 13 Jan 2010 13:57:04 +0000 Subject: [PATCH 2.6.33] SMDK6410: Specify no GPIO for B_PWR_5V regulator Message-ID: <1263391024-29502-1-git-send-email-broonie@opensource.wolfsonmicro.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Since the fixed voltage regulator grew support for GPIO based enables and GPIO 0 is valid on some systems we need to specify that there is no valid GPIO enable control. Signed-off-by: Mark Brown --- Sorry, resend due to thinkoed list address. arch/arm/mach-s3c6410/mach-smdk6410.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 8eb8d2c..bc3b1fd 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -211,6 +211,7 @@ static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = { .supply_name = "B_PWR_5V", .microvolts = 5000000, .init_data = &smdk6410_b_pwr_5v_data, + .gpio = -EINVAL, }; static struct platform_device smdk6410_b_pwr_5v = { -- 1.6.6