Samsung SoC device updates round 1

Samsung SoC device updates round 1

[Ben Dooks]

Some cleanups and moves preparing for updating the device handling
on the Samsung SoC line.

[PATCH] ARM: S3C: Rename s3c_device_usb to s3c_device_ohci

[Ben Dooks]

Prepare for the forthcoming device changes by renaming s3c_device_usb to
s3c_device_ohci as this is what the device represents.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/mach-amlm5900.c   |    2 +-
 arch/arm/mach-s3c2410/mach-bast.c       |    2 +-
 arch/arm/mach-s3c2410/mach-h1940.c      |    2 +-
 arch/arm/mach-s3c2410/mach-n30.c        |    2 +-
 arch/arm/mach-s3c2410/mach-otom.c       |    2 +-
 arch/arm/mach-s3c2410/mach-qt2410.c     |    2 +-
 arch/arm/mach-s3c2410/mach-smdk2410.c   |    2 +-
 arch/arm/mach-s3c2410/mach-tct_hammer.c |    2 +-
 arch/arm/mach-s3c2410/mach-vr1000.c     |    2 +-
 arch/arm/mach-s3c2410/usb-simtec.c      |    2 +-
 arch/arm/mach-s3c2412/mach-jive.c       |    2 +-
 arch/arm/mach-s3c2412/mach-smdk2413.c   |    2 +-
 arch/arm/mach-s3c2412/mach-vstms.c      |    2 +-
 arch/arm/mach-s3c2440/mach-anubis.c     |    2 +-
 arch/arm/mach-s3c2440/mach-at2440evb.c  |    2 +-
 arch/arm/mach-s3c2440/mach-mini2440.c   |    2 +-
 arch/arm/mach-s3c2440/mach-nexcoder.c   |    2 +-
 arch/arm/mach-s3c2440/mach-rx3715.c     |    2 +-
 arch/arm/mach-s3c2440/mach-smdk2440.c   |    2 +-
 arch/arm/mach-s3c2442/mach-gta02.c      |    4 ++--
 arch/arm/mach-s3c6410/mach-hmt.c        |    2 +-
 arch/arm/mach-s3c6410/mach-smdk6410.c   |    2 +-
 arch/arm/plat-s3c/include/plat/devs.h   |    2 +-
 arch/arm/plat-samsung/dev-usb.c         |    4 ++--
 24 files changed, 26 insertions(+), 26 deletions(-)

diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 06a84ad..7047317 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -153,7 +153,7 @@ static struct platform_device *amlm5900_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
-	&s3c_device_usb,
+	&s3c_device_ohci,
  	&s3c_device_rtc,
 	&s3c_device_usbgadget,
         &s3c_device_sdi,
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 97162fd..02b1b62 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -584,7 +584,7 @@ static struct s3c_hwmon_pdata bast_hwmon_info = {
 // cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
 
 static struct platform_device *bast_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 1e34abe..3f9217d 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -272,7 +272,7 @@ static struct platform_device h1940_lcd_powerdev = {
 
 static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_ts,
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 0405712..684710f 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -322,7 +322,7 @@ static struct platform_device *n30_devices[] __initdata = {
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_usbgadget,
 	&n30_button_device,
 	&n30_blue_led,
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index f6c7261..d8c7f2e 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -92,7 +92,7 @@ static struct platform_device otom_device_nor = {
 /* Standard OTOM devices */
 
 static struct platform_device *otom11_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index ab092bc..92a4ec3 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -246,7 +246,7 @@ static struct platform_device qt2410_spi = {
 /* Board devices */
 
 static struct platform_device *qt2410_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index c49126c..4522230 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -87,7 +87,7 @@ static struct s3c2410_uartcfg smdk2410_uartcfgs[] __initdata = {
 };
 
 static struct platform_device *smdk2410_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index 8fdb043..929164a 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -129,7 +129,7 @@ static struct platform_device *tct_hammer_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_rtc,
 	&s3c_device_usbgadget,
 	&s3c_device_sdi,
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 0d61fb5..9051f0d 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -334,7 +334,7 @@ static struct i2c_board_info vr1000_i2c_devs[] __initdata = {
 /* devices for this board */
 
 static struct platform_device *vr1000_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 6b9d0d8..199bb4f 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -127,6 +127,6 @@ int usb_simtec_init(void)
 	gpio_direction_output(S3C2410_GPB(4), 1);
 	gpio_direction_input(S3C2410_GPG(10));
 
-	s3c_device_usb.dev.platform_data = &usb_simtec_info;
+	s3c_device_ohci.dev.platform_data = &usb_simtec_info;
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index c9fa3fc..14f4798 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -468,7 +468,7 @@ static struct i2c_board_info jive_i2c_devs[] __initdata = {
 /* The platform devices being used. */
 
 static struct platform_device *jive_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 9a5e434..437c087 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -104,7 +104,7 @@ static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
 
 
 static struct platform_device *smdk2413_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	//&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index a6ba591..3ca9265 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -121,7 +121,7 @@ static struct s3c2410_platform_nand __initdata vstms_nand_info = {
 };
 
 static struct platform_device *vstms_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 62a4c3e..b73f78a 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -409,7 +409,7 @@ static struct platform_device anubis_device_sm501 = {
 /* Standard Anubis devices */
 
 static struct platform_device *anubis_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_adc,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index aa69290..0defde6 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -203,7 +203,7 @@ static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = {
 };
 
 static struct platform_device *at2440evb_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_adc,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 2068e90..347eb6d 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -506,7 +506,7 @@ static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
 };
 
 static struct platform_device *mini2440_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_wdt,
 /*	&s3c_device_adc,*/ /* ADC doesn't like living with touchscreen ! */
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index d43eded..86a243b 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -106,7 +106,7 @@ static struct platform_device nexcoder_device_nor = {
 /* Standard Nexcoder devices */
 
 static struct platform_device *nexcoder_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index a952a13..1e836e5 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -176,7 +176,7 @@ static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
 };
 
 static struct platform_device *rx3715_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index ec13e74..df3e9a3 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -150,7 +150,7 @@ static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = {
 };
 
 static struct platform_device *smdk2440_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index 0b4a3a0..825800b 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -565,7 +565,7 @@ static void __init gta02_map_io(void)
 /* These are the guys that don't need to be children of PMU. */
 
 static struct platform_device *gta02_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_sdi,
 	&s3c_device_usbgadget,
@@ -623,7 +623,7 @@ static void __init gta02_machine_init(void)
 	INIT_DELAYED_WORK(&gta02_charger_work, gta02_charger_worker);
 #endif
 
-	s3c_device_usb.dev.platform_data = &gta02_usb_info;
+	s3c_device_ohci.dev.platform_data = &gta02_usb_info;
 
 	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
 	s3c_nand_set_platdata(&gta02_nand_info);
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c
index cdd4b53..284886c 100644
--- a/arch/arm/mach-s3c6410/mach-hmt.c
+++ b/arch/arm/mach-s3c6410/mach-hmt.c
@@ -233,7 +233,7 @@ static struct platform_device *hmt_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_nand,
 	&s3c_device_fb,
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_timer[1],
 	&hmt_backlight_device,
 	&hmt_leds_device,
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 8969fe7..e2811fc 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -235,7 +235,7 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
 	&s3c_device_fb,
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_usb_hsotg,
 
 #ifdef CONFIG_REGULATOR
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 8a4153b..543a351 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -34,7 +34,7 @@ extern struct platform_device s3c64xx_device_pcm1;
 
 extern struct platform_device s3c_device_ts;
 extern struct platform_device s3c_device_fb;
-extern struct platform_device s3c_device_usb;
+extern struct platform_device s3c_device_ohci;
 extern struct platform_device s3c_device_lcd;
 extern struct platform_device s3c_device_wdt;
 extern struct platform_device s3c_device_i2c0;
diff --git a/arch/arm/plat-samsung/dev-usb.c b/arch/arm/plat-samsung/dev-usb.c
index 2ee85ab..431ae5d 100644
--- a/arch/arm/plat-samsung/dev-usb.c
+++ b/arch/arm/plat-samsung/dev-usb.c
@@ -36,7 +36,7 @@ static struct resource s3c_usb_resource[] = {
 
 static u64 s3c_device_usb_dmamask = 0xffffffffUL;
 
-struct platform_device s3c_device_usb = {
+struct platform_device s3c_device_ohci = {
 	.name		  = "s3c2410-ohci",
 	.id		  = -1,
 	.num_resources	  = ARRAY_SIZE(s3c_usb_resource),
@@ -47,4 +47,4 @@ struct platform_device s3c_device_usb = {
 	}
 };
 
-EXPORT_SYMBOL(s3c_device_usb);
+EXPORT_SYMBOL(s3c_device_ohci);
-- 
1.6.0.4

[PATCH] ARM: S3C2412: Fixup commented out device in SMDK2413

[Ben Dooks]

The SMDK2413 has a commented out device that does not have any setup
data for it, so remove it for now.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2412/mach-smdk2413.c |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 437c087..0392065 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -105,7 +105,6 @@ static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
 
 static struct platform_device *smdk2413_devices[] __initdata = {
 	&s3c_device_ohci,
-	//&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
-- 
1.6.0.4

[PATCH] ARM: SAMSUNG: Add initial documentation directory and overview

[Ben Dooks]

Start Documentation/arm/Samsung and add an initial overview file
which whilst is not complete, is better than nothing.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 Documentation/arm/Samsung/Overview.txt |   63 ++++++++++++++++++++++++++++++++
 1 files changed, 63 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/arm/Samsung/Overview.txt

diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt
new file mode 100644
index 0000000..c3d2f44
--- /dev/null
+++ b/Documentation/arm/Samsung/Overview.txt
@@ -0,0 +1,63 @@
+		Samsung ARM Linux Overview
+		==========================
+
+Introduction
+------------
+
+  The Samsung range of ARM SoCs spans many similar devices, from the initial
+  ARM9 through to the newest ARM cores. This document shows an overview of
+  the current kernel support, how to use it and where to find the code
+  that supports this.
+
+  The currently supported SoCs are:
+
+  - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
+  - S3C64XX: S3C6400 and S3C6410
+
+  S5PC100 and S5PC110 support is currently being merged
+
+
+S3C24XX Systems
+---------------
+
+  There is still documentation in Docuemntation/arm/Samsung-S3C24XX/ which
+  deals with the architecture and drivers specific to these devices.
+
+  See Documentation/arm/Samsung-S3C24XX/Overview.txt for more information
+  on the implementation details and specific support.
+
+
+Configuration
+-------------
+
+  A number of configurations are supplied, as there is no current way of
+  unifying all the SoCs into one kernel.
+
+  [ to finish ]
+
+Layout
+------
+
+  [ to finish ]
+
+
+Port Contributors
+-----------------
+
+  Ben Dooks (BJD)
+  Vincent Sanders
+  Herbert Potzl
+  Arnaud Patard (RTP)
+  Roc Wu
+  Klaus Fetscher
+  Dimitry Andric
+  Shannon Holland
+  Guillaume Gourat (NexVision)
+  Christer Weinigel (wingel) (Acer N30)
+  Lucas Correia Villa Real (S3C2400 port)
+
+
+Document Author
+---------------
+
+Copyright 2009 Ben Dooks <ben-linux@fluff.org>
-- 
1.6.0.4

[PATCH] ARM: SAMSUNG: Add initial documentation directory and overview

[Maurus Cuelenaere]

Op 15-01-10 11:39, Ben Dooks schreef:
> Start Documentation/arm/Samsung and add an initial overview file
> which whilst is not complete, is better than nothing.
>
> Signed-off-by: Ben Dooks<ben-linux@fluff.org>
> ---
>   Documentation/arm/Samsung/Overview.txt |   63 ++++++++++++++++++++++++++++++++
>   1 files changed, 63 insertions(+), 0 deletions(-)
>   create mode 100644 Documentation/arm/Samsung/Overview.txt
>
> diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt
> new file mode 100644
> index 0000000..c3d2f44
> --- /dev/null
> +++ b/Documentation/arm/Samsung/Overview.txt
> @@ -0,0 +1,63 @@
> +		Samsung ARM Linux Overview
> +		==========================
> +
> +Introduction
> +------------
> +
> +  The Samsung range of ARM SoCs spans many similar devices, from the initial
> +  ARM9 through to the newest ARM cores. This document shows an overview of
> +  the current kernel support, how to use it and where to find the code
> +  that supports this.
> +
> +  The currently supported SoCs are:
> +
> +  - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
> +  - S3C64XX: S3C6400 and S3C6410
> +
> +  S5PC100 and S5PC110 support is currently being merged
> +
> +
> +S3C24XX Systems
> +---------------
> +
> +  There is still documentation in Docuemntation/arm/Samsung-S3C24XX/ which
>    

Typo: Docuemntation -> Documentation
> +  deals with the architecture and drivers specific to these devices.
> +
> +  See Documentation/arm/Samsung-S3C24XX/Overview.txt for more information
> +  on the implementation details and specific support.
> +
> +
> +Configuration
> +-------------
> +
> +  A number of configurations are supplied, as there is no current way of
> +  unifying all the SoCs into one kernel.
> +
> +  [ to finish ]
> +
> +Layout
> +------
> +
> +  [ to finish ]
> +
> +
> +Port Contributors
> +-----------------
> +
> +  Ben Dooks (BJD)
> +  Vincent Sanders
> +  Herbert Potzl
> +  Arnaud Patard (RTP)
> +  Roc Wu
> +  Klaus Fetscher
> +  Dimitry Andric
> +  Shannon Holland
> +  Guillaume Gourat (NexVision)
> +  Christer Weinigel (wingel) (Acer N30)
> +  Lucas Correia Villa Real (S3C2400 port)
> +
> +
> +Document Author
> +---------------
> +
> +Copyright 2009 Ben Dooks<ben-linux@fluff.org>
>    


Regards,
Maurus Cuelenaere

[PATCH] ARM: SAMSUNG: Add initial documentation directory and overview

[Ben Dooks]

On Fri, Jan 15, 2010 at 11:58:51AM +0100, Maurus Cuelenaere wrote:
> Op 15-01-10 11:39, Ben Dooks schreef:
>> Start Documentation/arm/Samsung and add an initial overview file
>> which whilst is not complete, is better than nothing.
>>
>> Signed-off-by: Ben Dooks<ben-linux@fluff.org>

Thanks, although this shouldn't really have been in this series in the
first place.

>> ---
>>   Documentation/arm/Samsung/Overview.txt |   63 ++++++++++++++++++++++++++++++++
>>   1 files changed, 63 insertions(+), 0 deletions(-)
>>   create mode 100644 Documentation/arm/Samsung/Overview.txt
>>
>> diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt
>> new file mode 100644
>> index 0000000..c3d2f44
>> --- /dev/null
>> +++ b/Documentation/arm/Samsung/Overview.txt
>> @@ -0,0 +1,63 @@
>> +		Samsung ARM Linux Overview
>> +		==========================
>> +
>> +Introduction
>> +------------
>> +
>> +  The Samsung range of ARM SoCs spans many similar devices, from the initial
>> +  ARM9 through to the newest ARM cores. This document shows an overview of
>> +  the current kernel support, how to use it and where to find the code
>> +  that supports this.
>> +
>> +  The currently supported SoCs are:
>> +
>> +  - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
>> +  - S3C64XX: S3C6400 and S3C6410
>> +
>> +  S5PC100 and S5PC110 support is currently being merged
>> +
>> +
>> +S3C24XX Systems
>> +---------------
>> +
>> +  There is still documentation in Docuemntation/arm/Samsung-S3C24XX/ which
>>    
>
> Typo: Docuemntation -> Documentation
>> +  deals with the architecture and drivers specific to these devices.
>> +
>> +  See Documentation/arm/Samsung-S3C24XX/Overview.txt for more information
>> +  on the implementation details and specific support.
>> +
>> +
>> +Configuration
>> +-------------
>> +
>> +  A number of configurations are supplied, as there is no current way of
>> +  unifying all the SoCs into one kernel.
>> +
>> +  [ to finish ]
>> +
>> +Layout
>> +------
>> +
>> +  [ to finish ]
>> +
>> +
>> +Port Contributors
>> +-----------------
>> +
>> +  Ben Dooks (BJD)
>> +  Vincent Sanders
>> +  Herbert Potzl
>> +  Arnaud Patard (RTP)
>> +  Roc Wu
>> +  Klaus Fetscher
>> +  Dimitry Andric
>> +  Shannon Holland
>> +  Guillaume Gourat (NexVision)
>> +  Christer Weinigel (wingel) (Acer N30)
>> +  Lucas Correia Villa Real (S3C2400 port)
>> +
>> +
>> +Document Author
>> +---------------
>> +
>> +Copyright 2009 Ben Dooks<ben-linux@fluff.org>
>>    
>
>
> Regards,
> Maurus Cuelenaere
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
-- 
Ben

Q:      What's a light-year?
A:      One-third less calories than a regular year.

[PATCH] ARM: SAMSUNG: Make UART device code common

[Ben Dooks]

Move s3c24xx_uart_devs, s3c24xx_uart_src and the platform devices to a
common entry in plat-samsung since they are the same in all the current
implementations.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/devs.c     |   28 ------------------------
 arch/arm/plat-s3c64xx/dev-uart.c |   29 -------------------------
 arch/arm/plat-s5p/dev-uart.c     |   28 ------------------------
 arch/arm/plat-s5pc1xx/dev-uart.c |   29 -------------------------
 arch/arm/plat-samsung/Makefile   |    1 +
 arch/arm/plat-samsung/dev-uart.c |   44 ++++++++++++++++++++++++++++++++++++++
 6 files changed, 45 insertions(+), 114 deletions(-)
 create mode 100644 arch/arm/plat-samsung/dev-uart.c

diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 7f686a3..38c358c 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -112,34 +112,6 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
 	},
 };
 
-/* yart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
-	.id		= 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
-	.id		= 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
-	.id		= 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
-	.id		= 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
-	&s3c24xx_uart_device0,
-	&s3c24xx_uart_device1,
-	&s3c24xx_uart_device2,
-	&s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
-
 /* LCD Controller */
 
 static struct resource s3c_lcd_resource[] = {
diff --git a/arch/arm/plat-s3c64xx/dev-uart.c b/arch/arm/plat-s3c64xx/dev-uart.c
index 62c11a6..f797f74 100644
--- a/arch/arm/plat-s3c64xx/dev-uart.c
+++ b/arch/arm/plat-s3c64xx/dev-uart.c
@@ -145,32 +145,3 @@ struct s3c24xx_uart_resources s3c64xx_uart_resources[] __initdata = {
 		.nr_resources	= ARRAY_SIZE(s3c64xx_uart3_resource),
 	},
 };
-
-/* uart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
-	.id		= 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
-	.id		= 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
-	.id		= 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
-	.id		= 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
-	&s3c24xx_uart_device0,
-	&s3c24xx_uart_device1,
-	&s3c24xx_uart_device2,
-	&s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
-
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
index af726f4..23c7531 100644
--- a/arch/arm/plat-s5p/dev-uart.c
+++ b/arch/arm/plat-s5p/dev-uart.c
@@ -135,31 +135,3 @@ struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
 		.nr_resources	= ARRAY_SIZE(s5p_uart3_resource),
 	},
 };
-
-/* uart devices */
-
-static struct platform_device s5p_uart_device0 = {
-	.id		= 0,
-};
-
-static struct platform_device s5p_uart_device1 = {
-	.id		= 1,
-};
-
-static struct platform_device s5p_uart_device2 = {
-	.id		= 2,
-};
-
-static struct platform_device s5p_uart_device3 = {
-	.id		= 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
-	&s5p_uart_device0,
-	&s5p_uart_device1,
-	&s5p_uart_device2,
-	&s5p_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c
index f749bc5..586c95c 100644
--- a/arch/arm/plat-s5pc1xx/dev-uart.c
+++ b/arch/arm/plat-s5pc1xx/dev-uart.c
@@ -143,32 +143,3 @@ struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
 		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart3_resource),
 	},
 };
-
-/* uart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
-	.id		= 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
-	.id		= 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
-	.id		= 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
-	.id		= 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
-	&s3c24xx_uart_device0,
-	&s3c24xx_uart_device1,
-	&s3c24xx_uart_device2,
-	&s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
-
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index aeb7e12..f834e42 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_S3C_DEV_HSMMC2)	+= dev-hsmmc2.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
+obj-y				+= dev-uart.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
 obj-$(CONFIG_S3C_DEV_NAND)	+= dev-nand.o
diff --git a/arch/arm/plat-samsung/dev-uart.c b/arch/arm/plat-samsung/dev-uart.c
new file mode 100644
index 0000000..3776cd9
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-uart.c
@@ -0,0 +1,44 @@
+/* linux/arch/arm/plat-samsung/dev-uart.c
+ *	originally from arch/arm/plat-s3c24xx/devs.c
+ *x
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Base S3C24XX platform device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+	.id		= 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+	.id		= 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+	.id		= 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+	.id		= 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+	&s3c24xx_uart_device0,
+	&s3c24xx_uart_device1,
+	&s3c24xx_uart_device2,
+	&s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};
-- 
1.6.0.4

[PATCH] ARM: SAMSUNG: Add platform data registration for OHCI

[Ben Dooks]

Add a platform data helper for the OHCI device

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/usb-simtec.c           |    4 ++--
 arch/arm/mach-s3c2442/mach-gta02.c           |    5 ++---
 arch/arm/plat-s3c/include/plat/usb-control.h |    2 ++
 arch/arm/plat-samsung/dev-usb.c              |   21 ++++++++++++++++++++-
 4 files changed, 26 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 199bb4f..29bd3d9 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -91,7 +91,7 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on)
 	}
 }
 
-static struct s3c2410_hcd_info usb_simtec_info = {
+static struct s3c2410_hcd_info usb_simtec_info __initdata = {
 	.port[0]	= {
 		.flags	= S3C_HCDFLG_USED
 	},
@@ -127,6 +127,6 @@ int usb_simtec_init(void)
 	gpio_direction_output(S3C2410_GPB(4), 1);
 	gpio_direction_input(S3C2410_GPG(10));
 
-	s3c_device_ohci.dev.platform_data = &usb_simtec_info;
+	s3c_ohci_set_platdata(&usb_simtec_info);
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index 825800b..45799c6 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -544,7 +544,7 @@ static struct platform_device gta02_bl_dev = {
 
 
 /* USB */
-static struct s3c2410_hcd_info gta02_usb_info = {
+static struct s3c2410_hcd_info gta02_usb_info __initdata = {
 	.port[0]	= {
 		.flags	= S3C_HCDFLG_USED,
 	},
@@ -623,9 +623,8 @@ static void __init gta02_machine_init(void)
 	INIT_DELAYED_WORK(&gta02_charger_work, gta02_charger_worker);
 #endif
 
-	s3c_device_ohci.dev.platform_data = &gta02_usb_info;
-
 	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
+	s3c_ohci_set_platdata(&gta02_usb_info);
 	s3c_nand_set_platdata(&gta02_nand_info);
 	s3c_i2c0_set_platdata(NULL);
 
diff --git a/arch/arm/plat-s3c/include/plat/usb-control.h b/arch/arm/plat-s3c/include/plat/usb-control.h
index 822c87f..a6a57bf 100644
--- a/arch/arm/plat-s3c/include/plat/usb-control.h
+++ b/arch/arm/plat-s3c/include/plat/usb-control.h
@@ -38,4 +38,6 @@ static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int port
 	}
 }
 
+extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info);
+
 #endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/arch/arm/plat-samsung/dev-usb.c b/arch/arm/plat-samsung/dev-usb.c
index 431ae5d..8816565 100644
--- a/arch/arm/plat-samsung/dev-usb.c
+++ b/arch/arm/plat-samsung/dev-usb.c
@@ -19,7 +19,7 @@
 #include <mach/map.h>
 
 #include <plat/devs.h>
-
+#include <plat/usb-control.h>
 
 static struct resource s3c_usb_resource[] = {
 	[0] = {
@@ -48,3 +48,22 @@ struct platform_device s3c_device_ohci = {
 };
 
 EXPORT_SYMBOL(s3c_device_ohci);
+
+/**
+ * s3c_ohci_set_platdata - initialise OHCI device platform data
+ * @info: The platform data.
+ *
+ * This call copies the @info passed in and sets the device .platform_data
+ * field to that copy. The @info is copied so that the original can be marked
+ * __initdata.
+ */
+void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info)
+{
+	struct s3c2410_hcd_info *npd;
+
+	npd = kmemdup(info, sizeof(struct s3c2410_hcd_info), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+
+	s3c_device_ohci.dev.platform_data = npd;
+}
-- 
1.6.0.4

[PATCH] ARM: MINI2440: Remove commented out devices from device array

[Ben Dooks]

There's no point in having these in until there is proper support for
them, so remove as they only confuse the device changing script.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2440/mach-mini2440.c |    3 ---
 1 files changed, 0 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 347eb6d..65ea3b5 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -508,7 +508,6 @@ static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
 static struct platform_device *mini2440_devices[] __initdata = {
 	&s3c_device_ohci,
 	&s3c_device_wdt,
-/*	&s3c_device_adc,*/ /* ADC doesn't like living with touchscreen ! */
 	&s3c_device_i2c0,
 	&s3c_device_rtc,
 	&s3c_device_usbgadget,
@@ -522,8 +521,6 @@ static struct platform_device *mini2440_devices[] __initdata = {
 	&s3c_device_sdi,
 	&s3c_device_iis,
 	&mini2440_audio,
-/*	&s3c_device_timer[0],*/	/* buzzer pwm, no API for it */
-	/* remaining devices are optional */
 };
 
 static void __init mini2440_map_io(void)
-- 
1.6.0.4

Samsung SoC device updates (rev2)

[Ben Dooks]

Updated series to include the s3c24xx_mci_set_platdata() call.

Current branch next-samsung-devupdates1

[PATCH] ARM: S3C2412: Fixup commented out device in SMDK2413

[Ben Dooks]

The SMDK2413 has a commented out device that does not have any setup
data for it, so remove it for now.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2412/mach-smdk2413.c |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 437c087..0392065 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -105,7 +105,6 @@ static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
 
 static struct platform_device *smdk2413_devices[] __initdata = {
 	&s3c_device_ohci,
-	//&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
-- 
1.6.0.4