From: broonie@opensource.wolfsonmicro.com (Mark Brown)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] SMDK6410: Set up interrupt range for WM835x on 1190-EV1 PMIC board
Date: Tue, 19 Jan 2010 15:26:56 +0000 [thread overview]
Message-ID: <1263914816-19317-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
The WM835x driver won't actually use this yet but it will in the
future when the changes converting it to genirq are merged.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
arch/arm/mach-s3c6410/mach-smdk6410.c | 1 +
arch/arm/plat-s3c64xx/include/plat/irqs.h | 4 ++++
2 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 461935c..4691ded 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -400,6 +400,7 @@ static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
.init = smdk6410_wm8350_init,
.irq_high = 1,
+ .irq_base = IRQ_BOARD_START,
};
#endif
diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h
index 176fe15..a227581 100644
--- a/arch/arm/plat-s3c64xx/include/plat/irqs.h
+++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h
@@ -198,7 +198,11 @@
* interrupt controllers). */
#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+#define IRQ_BOARD_NR 64
+#else
#define IRQ_BOARD_NR 16
+#endif
#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
--
1.6.6
next reply other threads:[~2010-01-19 15:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-19 15:26 Mark Brown [this message]
-- strict thread matches above, loose matches on Subject: below --
2010-01-08 15:23 [PATCH] SMDK6410: Set up interrupt range for WM835x on 1190-EV1 PMIC board Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1263914816-19317-1-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).