* [PATCH 02/10] ARM: LPC32XX: arch Kconfig, platform Kconfig, and makefiles
@ 2010-01-27 0:19 Kevin Wells
2010-01-27 3:42 ` Baruch Siach
0 siblings, 1 reply; 2+ messages in thread
From: Kevin Wells @ 2010-01-27 0:19 UTC (permalink / raw)
To: linux-arm-kernel
LPC32xx architecture Kconfig, platform Kconfig, and makefiles
Signed-off-by: Kevin Wells <kevin.wells@nxp.com>
---
arch/arm/mach-lpc32xx/Kconfig | 158
+++++++++++++++++++++++++++++++++++
arch/arm/mach-lpc32xx/Kconfig.plat | 98 ++++++++++++++++++++++
arch/arm/mach-lpc32xx/Makefile | 9 ++
arch/arm/mach-lpc32xx/Makefile.boot | 4 +
4 files changed, 269 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-lpc32xx/Kconfig
b/arch/arm/mach-lpc32xx/Kconfig
new file mode 100644
index 0000000..a277885
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/Kconfig
@@ -0,0 +1,158 @@
+if ARCH_LPC32XX
+
+menu "LPC32XX chip options"
+
+config ARCH_LPC32XX_IRAM_SIZE
+ int
+ default 131072 if ARCH_LPC32XX_20
+ default 262144 if ARCH_LPC32XX_30 || ARCH_LPC32XX_40 ||
ARCH_LPC32XX_50
+
+choice
+ prompt "Select 32x0 device variation"
+ default ARCH_LPC32XX_50
+
+ config ARCH_LPC32XX_20
+ bool "LPC3220"
+ help
+ 128K IRAM, no ethernet or LCD
+
+ config ARCH_LPC32XX_30
+ bool "LPC3230"
+ help
+ 256K IRAM and LCD, no ethernet
+
+ config ARCH_LPC32XX_40
+ bool "LPC3240"
+ help
+ 256K IRAM and ethernet, no LCD
+
+ config ARCH_LPC32XX_50
+ bool "LPC3250"
+ help
+ 256K IRAM and ethernet and LCD
+
+endchoice
+
+menu "Serial port configuration"
+
+menu "Individual UART enable selections"
+
+config ARCH_LPC32XX_HSUART1_ENABLE
+ bool "Enable high speed UART1"
+ help
+ Also enable LPC32xx high speed serial support in drivers/serial
+
+config ARCH_LPC32XX_HSUART2_ENABLE
+ bool "Enable high speed UART2"
+ help
+ Also enable LPC32xx high speed serial support in drivers/serial
+
+config ARCH_LPC32XX_UART3_ENABLE
+ bool "Enable standard UART3"
+ help
+ Also enable 8250 serial support in drivers/serial
+
+config ARCH_LPC32XX_UART4_ENABLE
+ bool "Enable standard UART4"
+ help
+ Also enable 8250 serial support in drivers/serial
+
+config ARCH_LPC32XX_UART5_ENABLE
+ bool "Enable standard UART5"
+ default y
+ help
+ Also enable 8250 serial support in drivers/serial
+
+config ARCH_LPC32XX_UART6_ENABLE
+ bool "Enable standard UART6"
+ help
+ Also enable 8250 serial support in drivers/serial
+
+config ARCH_LPC32XX_HSUART7_ENABLE
+ bool "Enable high speed UART7"
+ help
+ Also enable LPC32xx high speed serial support in drivers/serial
+
+endmenu
+
+config ARCH_LPC32XX_UART6_IRDAMODE
+ bool "Use IRDA mode on UART6"
+ depends on ARCH_LPC32XX_UART6_ENABLE
+ help
+ Enables the IrDA modulator for UART6
+
+choice
+ prompt "Kernel uncompress status output UART selection"
+ default ARCH_LPC32XX_UNCOMP_U5
+
+ config ARCH_LPC32XX_UNCOMP_HSU1
+ bool "High speed UART 1"
+ help
+ Kernel uncompress output is on high speed UART 1
+
+ config ARCH_LPC32XX_UNCOMP_HSU2
+ bool "High speed UART 2"
+ help
+ Kernel uncompress output is on high speed UART 2
+
+ config ARCH_LPC32XX_UNCOMP_U3
+ bool "Standard UART 3"
+ help
+ Kernel uncompress output is on standard UART 3
+
+ config ARCH_LPC32XX_UNCOMP_U4
+ bool "Standard UART 4"
+ help
+ Kernel uncompress output is on standard UART 4
+
+ config ARCH_LPC32XX_UNCOMP_U5
+ bool "Standard UART 5"
+ help
+ Kernel uncompress output is on standard UART 5
+
+ config ARCH_LPC32XX_UNCOMP_U6
+ bool "Standard UART 6"
+ help
+ Kernel uncompress output is on standard UART 6
+
+ config ARCH_LPC32XX_UNCOMP_HSU7
+ bool "High speed UART 7"
+ help
+ Kernel uncompress output is on high speed UART 7
+
+endchoice
+
+choice
+ prompt "debug output (printascii) UART selection"
+ default ARCH_LPC32XX_DEBUGO_U5
+
+ config ARCH_LPC32XX_DEBUGO_U3
+ bool "Standard UART 3"
+ help
+ printascii messages are output on standard UART 3
+
+ config ARCH_LPC32XX_DEBUGO_U4
+ bool "Standard UART 4"
+ help
+ printascii messages are output on standard UART 4
+
+ config ARCH_LPC32XX_DEBUGO_U5
+ bool "Standard UART 5"
+ help
+ printascii messages are output on standard UART 5
+
+ config ARCH_LPC32XX_DEBUGO_U6
+ bool "Standard UART 6"
+ help
+ printascii messages are output on standard UART 6
+
+endchoice
+
+endmenu
+
+endmenu
+
+source "arch/arm/mach-lpc32xx/Kconfig.plat"
+
+endif
+
diff --git a/arch/arm/mach-lpc32xx/Kconfig.plat
b/arch/arm/mach-lpc32xx/Kconfig.plat
new file mode 100644
index 0000000..a67d1ad
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/Kconfig.plat
@@ -0,0 +1,98 @@
+menu "LPC32XX platform choices"
+
+choice
+ prompt "Choose your board"
+ default MACH_PHY3250
+ help
+ This menu selects the LPC3250 board to support for this build
+
+ config MACH_PHY3250
+ bool "Phytec 3250 development board"
+ help
+ Support for the Phytec 3250 development board
+
+endchoice
+
+choice
+ prompt "Phytec LCD module revisions"
+ depends on MACH_PHY3250
+ default PHY3250_QVGA_PANEL_1307_1
+ help
+ Select one of the supported LCD panel revisions
+
+config PHY3250_QVGA_PANEL_1307_0
+ bool "1307.0 QVGA panel (portrait mode RGB565)"
+ help
+ Use LCD module version 1307.0
+
+config PHY3250_QVGA_PANEL_1307_1
+ bool "1307.1 QVGA panel (portrait mode RGB565)"
+ help
+ Use LCD module version 1307.1
+
+endchoice
+
+choice
+ prompt "Phytec CPU module revisions"
+ depends on MACH_PHY3250
+ default PHY3250_CPU_MODULE_1304_1
+ help
+ Select one of the supported CPU module revisions
+
+config PHY3250_CPU_MODULE_1304_0
+ bool "1304.0 CPU module"
+ help
+ Use CPU module version 1304.0
+
+config PHY3250_CPU_MODULE_1304_1
+ bool "1304.1 CPU module"
+ help
+ Use CPU module version 1304.1
+
+endchoice
+
+choice
+ prompt "Phytec Carrier board revisions"
+ depends on MACH_PHY3250
+ default PHY3250_CARRIER_1305_3
+ help
+ Select one of the supported carrier board revisions
+
+config PHY3250_CARRIER_1305_01
+ bool "1305.0 or 1305.1 carrier board"
+ help
+ Use carrier board version 1305.0 or 1305.1
+
+config PHY3250_CARRIER_1305_2
+ bool "1305.2 carrier board"
+ help
+ Use carrier board version 1305.2
+
+config PHY3250_CARRIER_1305_3
+ bool "1305.3 carrier board"
+ help
+ Use carrier board version 1305.3
+
+endchoice
+
+choice
+ prompt "Internal IRAM use"
+ default MACH_LPC32XX_IRAM_RESERVED
+ depends on MACH_PHY3250
+
+config MACH_LPC32XX_IRAM_RESERVED
+ bool "IRAM is not used (reserved)"
+ help
+ IRAM is not used for video or networking and can be used for
+ other purposes or drivers
+
+config MACH_LPC32XX_IRAM_FOR_CLCD
+ bool "Use IRAM as a video frame buffer"
+ help
+ IRAM will be used for the LCD frame buffer. If the required
buffer
+ size is larger than the size of IRAM, then SDRAM will be used
+ instead.
+
+endchoice
+
+endmenu
diff --git a/arch/arm/mach-lpc32xx/Makefile
b/arch/arm/mach-lpc32xx/Makefile
new file mode 100644
index 0000000..9c76c70
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y := timer.o irq.o common.o serial.o
clock.o
+obj-y += gpiolib.o pm.o pm_events.o suspend.o
+
+obj-$(CONFIG_MACH_PHY3250) += phy3250.o
+
diff --git a/arch/arm/mach-lpc32xx/Makefile.boot
b/arch/arm/mach-lpc32xx/Makefile.boot
new file mode 100644
index 0000000..b796b41
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/Makefile.boot
@@ -0,0 +1,4 @@
+ zreladdr-y := 0x80008000
+params_phys-y := 0x80000100
+initrd_phys-y := 0x82000000
+
--
1.6.6
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH 02/10] ARM: LPC32XX: arch Kconfig, platform Kconfig, and makefiles
2010-01-27 0:19 [PATCH 02/10] ARM: LPC32XX: arch Kconfig, platform Kconfig, and makefiles Kevin Wells
@ 2010-01-27 3:42 ` Baruch Siach
0 siblings, 0 replies; 2+ messages in thread
From: Baruch Siach @ 2010-01-27 3:42 UTC (permalink / raw)
To: linux-arm-kernel
Hi Kevin,
On Tue, Jan 26, 2010 at 04:19:42PM -0800, Kevin Wells wrote:
> LPC32xx architecture Kconfig, platform Kconfig, and makefiles
>
>
> Signed-off-by: Kevin Wells <kevin.wells@nxp.com>
> ---
> arch/arm/mach-lpc32xx/Kconfig | 158
> +++++++++++++++++++++++++++++++++++
> arch/arm/mach-lpc32xx/Kconfig.plat | 98 ++++++++++++++++++++++
> arch/arm/mach-lpc32xx/Makefile | 9 ++
> arch/arm/mach-lpc32xx/Makefile.boot | 4 +
> 4 files changed, 269 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-lpc32xx/Kconfig
> b/arch/arm/mach-lpc32xx/Kconfig
> new file mode 100644
> index 0000000..a277885
> --- /dev/null
> +++ b/arch/arm/mach-lpc32xx/Kconfig
> @@ -0,0 +1,158 @@
> +if ARCH_LPC32XX
> +
> +menu "LPC32XX chip options"
> +
> +config ARCH_LPC32XX_IRAM_SIZE
> + int
> + default 131072 if ARCH_LPC32XX_20
> + default 262144 if ARCH_LPC32XX_30 || ARCH_LPC32XX_40 ||
> ARCH_LPC32XX_50
^^^^^^^^^^^^^^^
You mailer (Balsa?) wraps long lines in this and in other patches, thus
corrupting them. Please fix.
baruch
--
~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-01-27 3:42 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-01-27 0:19 [PATCH 02/10] ARM: LPC32XX: arch Kconfig, platform Kconfig, and makefiles Kevin Wells
2010-01-27 3:42 ` Baruch Siach
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).