* [Rev2]Samsung: New driver for AC97 controllers
@ 2010-01-27 5:56 jassisinghbrar at gmail.com
2010-01-27 11:06 ` Mark Brown
2010-01-27 20:45 ` Mark Brown
0 siblings, 2 replies; 4+ messages in thread
From: jassisinghbrar at gmail.com @ 2010-01-27 5:56 UTC (permalink / raw)
To: linux-arm-kernel
From: Jassi Brar <jassi.brar@samsung.com>
Hi,
I am going to submit revised patches for new driver for the AC97-ver-2.0
controllers found in Samsung SoCs. The driver is named generic s3c-ac97.c
The driver has been tested for on s3c64xx and newer SoCs and is confirmed
to support Playback/Capture and VRA.
A machine driver, for SMDKs with wm9713 as AC97 codec attached, has also
been added. The driver is generic enough to be used as such with newer SoCs.
The controller driver patch is meant for Mark Brown's for-2.6.34
Other patches apply cleanly against the Ben Dooks' next-samsung
Last few patches move smd2443 and ln2440sbc ac97 drivers to use new s3c-ac97.c
and at last the s3c2443-ac97.c is removed.
Regards.
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Rev2]Samsung: New driver for AC97 controllers
2010-01-27 5:56 [Rev2]Samsung: New driver for AC97 controllers jassisinghbrar at gmail.com
@ 2010-01-27 11:06 ` Mark Brown
2010-01-27 20:45 ` Mark Brown
1 sibling, 0 replies; 4+ messages in thread
From: Mark Brown @ 2010-01-27 11:06 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jan 27, 2010 at 02:56:55PM +0900, jassisinghbrar at gmail.com wrote:
> I am going to submit revised patches for new driver for the AC97-ver-2.0
> controllers found in Samsung SoCs. The driver is named generic s3c-ac97.c
> The driver has been tested for on s3c64xx and newer SoCs and is confirmed
> to support Playback/Capture and VRA.
The ASoC bits of this all look good, I'll do some testing before I apply
them though (probably later today) since I have relevant hardware on my
desk.
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Rev2]Samsung: New driver for AC97 controllers
2010-01-27 5:56 [Rev2]Samsung: New driver for AC97 controllers jassisinghbrar at gmail.com
2010-01-27 11:06 ` Mark Brown
@ 2010-01-27 20:45 ` Mark Brown
2010-01-27 23:01 ` jassi brar
1 sibling, 1 reply; 4+ messages in thread
From: Mark Brown @ 2010-01-27 20:45 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jan 27, 2010 at 02:56:55PM +0900, jassisinghbrar at gmail.com wrote:
> A machine driver, for SMDKs with wm9713 as AC97 codec attached, has also
> been added. The driver is generic enough to be used as such with newer SoCs.
OK, works for me with a smoke test so I've applied all the sound/soc
parts. I'll add a commit detailing the CFG jumper settings expected to
make it work out of the box on SMDK6410 since that catches quite a few
people out.
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Rev2]Samsung: New driver for AC97 controllers
2010-01-27 20:45 ` Mark Brown
@ 2010-01-27 23:01 ` jassi brar
0 siblings, 0 replies; 4+ messages in thread
From: jassi brar @ 2010-01-27 23:01 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jan 28, 2010 at 5:45 AM, Mark Brown
<broonie@opensource.wolfsonmicro.com> wrote:
> On Wed, Jan 27, 2010 at 02:56:55PM +0900, jassisinghbrar at gmail.com wrote:
>
>> ?A machine driver, for SMDKs with wm9713 as AC97 codec attached, has also
>> been added. The driver is generic enough to be used as such with newer SoCs.
>
> OK, works for me with a smoke test so I've applied all the sound/soc
> parts. ?I'll add a commit detailing the CFG jumper settings expected to
> make it work out of the box on SMDK6410 since that catches quite a few
> people out.
Thanks.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-01-27 23:01 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-01-27 5:56 [Rev2]Samsung: New driver for AC97 controllers jassisinghbrar at gmail.com
2010-01-27 11:06 ` Mark Brown
2010-01-27 20:45 ` Mark Brown
2010-01-27 23:01 ` jassi brar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).