From: adharmap@codeaurora.org (adharmap at codeaurora.org)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/5] gic: Add set_type callback
Date: Wed, 27 Jan 2010 11:32:27 -0800 [thread overview]
Message-ID: <1264620749-24527-4-git-send-email-adharmap@codeaurora.org> (raw)
In-Reply-To: <1264620749-24527-1-git-send-email-adharmap@codeaurora.org>
From: Abhijeet Dharmapurikar <adharmap@quicinc.com>
Add gic_set_type callback to set an irq as level or edge triggered type
Signed-off-by: Abhijeet Dharmapurikar <adharmap@quicinc.com>
---
arch/arm/common/gic.c | 43 +++++++++++++++++++++++++++++++++++++++++++
1 files changed, 43 insertions(+), 0 deletions(-)
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 00172c4..709cf53 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -165,6 +165,48 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
chip->unmask(irq);
}
+static int gic_set_type(unsigned int irq, unsigned int flow_type)
+{
+ unsigned int register_index;
+ unsigned int bit_index;
+ unsigned int reg_value;
+
+ if (irq > 1020)
+ return -1;
+
+ /*
+ * Two bits each, calc the register and bit, 16 per 32 bit register
+ * accessible long word only
+ * But the field is NxN 1xN and rising/falling
+ */
+ register_index = (irq/16)<<2;
+ bit_index = (irq & 0xF)<<1;
+
+ spin_lock(&irq_controller_lock);
+ reg_value = readl(gic_dist_base(irq) + GIC_DIST_CONFIG +
+ register_index);
+ /*
+ * keep the nxn and 1xn , mask the edge level
+ * Edge is 1, level 0
+ */
+ reg_value = (reg_value & ~(2<<bit_index));
+ if (flow_type & (IRQ_TYPE_EDGE_RISING|IRQ_TYPE_EDGE_FALLING)) {
+ reg_value |= (2<<bit_index);
+ writel(reg_value, gic_dist_base(irq) + GIC_DIST_CONFIG
+ + register_index);
+ __set_irq_handler_unlocked(irq, handle_edge_irq);
+ }
+
+ if (flow_type & (IRQ_TYPE_LEVEL_HIGH|IRQ_TYPE_LEVEL_LOW)) {
+ writel(reg_value, gic_dist_base(irq) + GIC_DIST_CONFIG
+ + register_index);
+ __set_irq_handler_unlocked(irq, handle_level_irq);
+ }
+
+ spin_unlock(&irq_controller_lock);
+ return 0;
+}
+
static struct irq_chip gic_chip = {
.name = "GIC",
.ack = gic_ack_irq,
@@ -174,6 +216,7 @@ static struct irq_chip gic_chip = {
#ifdef CONFIG_SMP
.set_affinity = gic_set_cpu,
#endif
+ .set_type = gic_set_type,
};
void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
--
1.5.6.3
next prev parent reply other threads:[~2010-01-27 19:32 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-27 19:32 [PATCH 0/5] Arm Gic Changes adharmap at codeaurora.org
2010-01-27 19:32 ` [PATCH 1/5] gic: prevent gic from crossing NR_IRQ adharmap at codeaurora.org
2010-01-27 22:43 ` Russell King - ARM Linux
2010-01-28 13:19 ` Catalin Marinas
2010-01-27 19:32 ` [PATCH 2/5] gic: add callback for mask_ack adharmap at codeaurora.org
2010-01-27 19:32 ` adharmap at codeaurora.org [this message]
2010-01-27 23:09 ` [PATCH 3/5] gic: Add set_type callback Russell King - ARM Linux
2010-01-27 23:18 ` Russell King - ARM Linux
2010-01-28 1:43 ` Abhijeet Dharmapurikar
2010-05-07 10:56 ` Linus Walleij
2010-01-27 19:32 ` [PATCH 4/5] gic: dont disable INT in ack callback adharmap at codeaurora.org
2010-01-27 19:32 ` [RFC PATCH 5/5] gic: initialize interrupts as per argument adharmap at codeaurora.org
2010-01-27 23:29 ` Russell King - ARM Linux
2010-01-28 0:39 ` [PATCH 0/5] Arm Gic Changes Ben Dooks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1264620749-24527-4-git-send-email-adharmap@codeaurora.org \
--to=adharmap@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).