sound related i.MX patches

sound related i.MX patches

[Sascha Hauer]

Hi,

The following patches add sound support for the Phytec pca100 and
pcm043 boards. The first patch adds the ssi header file in
include/mach which Marc has - intentionally or not - dropped from
my i.MX sound driver. Anyway, adding this file along with the
users prevents compile breakage.

Sascha

The following changes since commit cb2dc111b156eb41f61ed4e5b3a3a5df90526d9d:
  Sascha Hauer (1):
        i.MX27 pca100: Add USB support

are available in the git repository at:

  git://git.pengutronix.de/git/imx/linux-2.6.git mxc-pu

Sascha Hauer (3):
      add ssi header file
      pca100: add sound support
      i.MX pcm043: Add AC97 sound support

 arch/arm/mach-mx2/mach-pca100.c      |   48 ++++++++++++++++
 arch/arm/mach-mx3/mach-pcm043.c      |  101 ++++++++++++++++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/ssi.h |   18 ++++++
 3 files changed, 167 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/plat-mxc/include/mach/ssi.h

[PATCH 1/3] add ssi header file

[Sascha Hauer]

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/ssi.h |   18 ++++++++++++++++++
 1 files changed, 18 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/plat-mxc/include/mach/ssi.h

diff --git a/arch/arm/plat-mxc/include/mach/ssi.h b/arch/arm/plat-mxc/include/mach/ssi.h
new file mode 100644
index 0000000..c34ded5
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/ssi.h
@@ -0,0 +1,18 @@
+#ifndef __MACH_SSI_H
+#define __MACH_SSI_H
+
+struct snd_ac97;
+
+extern unsigned char imx_ssi_fiq_start, imx_ssi_fiq_end;
+extern unsigned long imx_ssi_fiq_base, imx_ssi_fiq_tx_buffer, imx_ssi_fiq_rx_buffer;
+
+struct imx_ssi_platform_data {
+	unsigned int flags;
+#define IMX_SSI_DMA            (1 << 0)
+#define IMX_SSI_USE_AC97       (1 << 1)
+	void (*ac97_reset) (struct snd_ac97 *ac97);
+	void (*ac97_warm_reset)(struct snd_ac97 *ac97);
+};
+
+#endif /* __MACH_SSI_H */
+
-- 
1.6.6

[PATCH 2/3] pca100: add sound support

[Sascha Hauer]

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/mach-pca100.c |   48 +++++++++++++++++++++++++++++++++++++++
 1 files changed, 48 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mx2/mach-pca100.c b/arch/arm/mach-mx2/mach-pca100.c
index cda52a6..d12bdb1 100644
--- a/arch/arm/mach-mx2/mach-pca100.c
+++ b/arch/arm/mach-mx2/mach-pca100.c
@@ -25,6 +25,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 #include <linux/irq.h>
+#include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
@@ -41,6 +42,8 @@
 #include <mach/spi.h>
 #endif
 #include <mach/imx-uart.h>
+#include <mach/audmux.h>
+#include <mach/ssi.h>
 #include <mach/mxc_nand.h>
 #include <mach/irqs.h>
 #include <mach/mmc.h>
@@ -193,6 +196,37 @@ static struct spi_imx_master pca100_spi_0_data = {
 };
 #endif
 
+static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+	mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);
+	gpio_set_value(GPIO_PORTC + 20, 1);
+	udelay(2);
+	gpio_set_value(GPIO_PORTC + 20, 0);
+	mxc_gpio_mode(PC20_PF_SSI1_FS);
+	msleep(2);
+}
+
+static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);  /* FS */
+	gpio_set_value(GPIO_PORTC + 20, 0);
+	mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT);  /* TX */
+	gpio_set_value(GPIO_PORTC + 22, 0);
+	mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OUT);  /* reset */
+	gpio_set_value(GPIO_PORTC + 28, 0);
+	udelay(10);
+	gpio_set_value(GPIO_PORTC + 28, 1);
+	mxc_gpio_mode(PC20_PF_SSI1_FS);
+	mxc_gpio_mode(PC22_PF_SSI1_TXD);
+	msleep(2);
+}
+
+static struct imx_ssi_platform_data pca100_ssi_pdata = {
+	.ac97_reset		= pca100_ac97_cold_reset,
+	.ac97_warm_reset	= pca100_ac97_warm_reset,
+	.flags			= IMX_SSI_USE_AC97,
+};
+
 static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
 		void *data)
 {
@@ -266,11 +300,25 @@ static void __init pca100_init(void)
 {
 	int ret;
 
+	/* SSI unit */
+	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
+				  MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+				  MXC_AUDMUX_V1_PCR_TFCSEL(3) |
+				  MXC_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */
+				  MXC_AUDMUX_V1_PCR_RXDSEL(3));
+	mxc_audmux_v1_configure_port(3,
+				  MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+				  MXC_AUDMUX_V1_PCR_TFCSEL(0) |
+				  MXC_AUDMUX_V1_PCR_TFSDIR |
+				  MXC_AUDMUX_V1_PCR_RXDSEL(0));
+
 	ret = mxc_gpio_setup_multiple_pins(pca100_pins,
 			ARRAY_SIZE(pca100_pins), "PCA100");
 	if (ret)
 		printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
 
+	mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata);
+
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 
 	mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
-- 
1.6.6

[PATCH 3/3] i.MX pcm043: Add AC97 sound support

[Sascha Hauer]

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mach-pcm043.c |  101 +++++++++++++++++++++++++++++++++++++++
 1 files changed, 101 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index a9741c2..1bf1ec2 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -26,6 +26,7 @@
 #include <linux/gpio.h>
 #include <linux/smc911x.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
 #include <linux/usb/otg.h>
@@ -49,6 +50,8 @@
 #include <mach/mxc_nand.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
+#include <mach/audmux.h>
+#include <mach/ssi.h>
 
 #include "devices.h"
 
@@ -213,6 +216,91 @@ static struct pad_desc pcm043_pads[] = {
 	/* USB host */
 	MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
 	MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
+	/* SSI */
+	MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
+	MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
+	MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
+	MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
+};
+
+#define AC97_GPIO_TXFS	(1 * 32 + 31)
+#define AC97_GPIO_TXD	(1 * 32 + 28)
+#define AC97_GPIO_RESET	(1 * 32 + 0)
+
+static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+	struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
+	struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
+	int ret;
+
+	ret = gpio_request(AC97_GPIO_TXFS, "SSI");
+	if (ret) {
+		printk("failed to get GPIO_TXFS: %d\n", ret);
+		return;
+	}
+
+	mxc_iomux_v3_setup_pad(&txfs_gpio);
+
+	/* warm reset */
+	gpio_direction_output(AC97_GPIO_TXFS, 1);
+	udelay(2);
+	gpio_set_value(AC97_GPIO_TXFS, 0);
+
+	gpio_free(AC97_GPIO_TXFS);
+	mxc_iomux_v3_setup_pad(&txfs);
+}
+
+static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
+	struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
+	struct pad_desc txd_gpio = MX35_PAD_STXD4__GPIO2_28;
+	struct pad_desc txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
+	struct pad_desc reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
+	int ret;
+
+	ret = gpio_request(AC97_GPIO_TXFS, "SSI");
+	if (ret)
+		goto err1;
+
+	ret = gpio_request(AC97_GPIO_TXD, "SSI");
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(AC97_GPIO_RESET, "SSI");
+	if (ret)
+		goto err3;
+
+	mxc_iomux_v3_setup_pad(&txfs_gpio);
+	mxc_iomux_v3_setup_pad(&txd_gpio);
+	mxc_iomux_v3_setup_pad(&reset_gpio);
+
+	gpio_direction_output(AC97_GPIO_TXFS, 0);
+	gpio_direction_output(AC97_GPIO_TXD, 0);
+
+	/* cold reset */
+	gpio_direction_output(AC97_GPIO_RESET, 0);
+	udelay(10);
+	gpio_direction_output(AC97_GPIO_RESET, 1);
+
+	mxc_iomux_v3_setup_pad(&txd);
+	mxc_iomux_v3_setup_pad(&txfs);
+
+	gpio_free(AC97_GPIO_RESET);
+err3:
+	gpio_free(AC97_GPIO_TXD);
+err2:
+	gpio_free(AC97_GPIO_TXFS);
+err1:
+	if (ret)
+		printk("%s failed with %d\n", __func__, ret);
+	mdelay(1);
+}
+
+static struct imx_ssi_platform_data pcm043_ssi_pdata = {
+	.ac97_reset = pcm043_ac97_cold_reset,
+	.ac97_warm_reset = pcm043_ac97_warm_reset,
+	.flags = IMX_SSI_USE_AC97,
 };
 
 static struct mxc_nand_platform_data pcm037_nand_board_info = {
@@ -258,10 +346,23 @@ static void __init mxc_board_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
 
+	mxc_audmux_v2_configure_port(3,
+			MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+			MXC_AUDMUX_V2_PTCR_TFSEL(0) |
+			MXC_AUDMUX_V2_PTCR_TFSDIR,
+			MXC_AUDMUX_V2_PDCR_RXDSEL(0));
+
+	mxc_audmux_v2_configure_port(0,
+			MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+			MXC_AUDMUX_V2_PTCR_TCSEL(3) |
+			MXC_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */
+			MXC_AUDMUX_V2_PDCR_RXDSEL(3));
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+	mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata);
 
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 
-- 
1.6.6