From: john.holland@cellent-fs.de (John Holland)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] 3/3 kirkwood/sheeva: correlate MPP to SD CD and SD WP
Date: Fri, 19 Feb 2010 23:11:04 +0100 [thread overview]
Message-ID: <1266617464.8172.139.camel@oklahoma> (raw)
In-Reply-To: <alpine.LFD.2.00.1002191618310.1946@xanadu.home>
Accept SD CD and SD WP in accordance to
http://plugcomputer.org/data/docs/Sheeva-PowerPlug-V1.3-GTI-090906.pdf
on MPP 47 and 44 respectively on the eSATA SheevaPlug
Signed-off-by: John Holland <john.holland@cellent-fs.de>
--
diff -Naur linux-2.6-2.6.32/arch/arm/mach-kirkwood/sheevaplug-setup.c linux-2.6-2.6.32.new/arch/arm/mach-kirkwood/sheevaplug-setup.c
--- linux-2.6-2.6.32/arch/arm/mach-kirkwood/sheevaplug-setup.c 2010-02-19 19:15:49.643951762 +0100
+++ linux-2.6-2.6.32.new/arch/arm/mach-kirkwood/sheevaplug-setup.c 2010-02-19 19:18:13.249598152 +0100
@@ -51,6 +51,11 @@
/* unfortunately the CD signal has not been connected */
};
+static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
+ .gpio_write_protect = 44, /* MPP44 used as SD write protect */
+ .gpio_card_detect = 47, /* MPP47 used as SD card detect */
+};
+
static struct gpio_led sheevaplug_led_pins[] = {
{
.name = "plug:green:health",
@@ -79,13 +84,26 @@
0
};
+static unsigned int sheeva_esata_mpp_config[] __initdata = {
+ MPP29_GPIO, /* USB Power Enable */
+ MPP44_GPIO, /* SD Write Protect */
+ MPP47_GPIO, /* SD Card Detect */
+ MPP49_GPIO, /* LED Green */
+ 0
+};
+
static void __init sheevaplug_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_init();
- kirkwood_mpp_conf(sheevaplug_mpp_config);
+
+ /* setup gpio pin select */
+ if (machine_is_sheeva_esata())
+ kirkwood_mpp_conf(sheeva_esata_mpp_config);
+ else
+ kirkwood_mpp_conf(sheevaplug_mpp_config);
kirkwood_uart0_init();
kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
@@ -101,7 +119,11 @@
if (machine_is_sheeva_esata())
kirkwood_sata_init(&sheeva_esata_sata_data);
- kirkwood_sdio_init(&sheevaplug_mvsdio_data);
+ /* enable sd wp and sd cd on plugs with esata */
+ if (machine_is_sheeva_esata())
+ kirkwood_sdio_init(&sheeva_esata_mvsdio_data);
+ else
+ kirkwood_sdio_init(&sheevaplug_mvsdio_data);
platform_device_register(&sheevaplug_leds);
}
Although this has not yet been thoroughly tested, it has no noticeable
adverse effects.
--
John Holland
___________________________________________
Cellent Finance Solutions AG
Firmensitz: Calwer Stra?e 33, 70173 Stuttgart
Registergericht: Amtsgericht Stuttgart, HRB 720743
Vorstand: Thomas Wild
Vorsitzender des Aufsichtsrats: Rudolf Zipf
prev parent reply other threads:[~2010-02-19 22:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-19 20:55 RFC patch set - kirkwood/sheeva - enable eSATA port John Holland
2010-02-19 21:34 ` Nicolas Pitre
2010-02-19 22:10 ` [PATCH] 1/3 kirkwood/sheeva: basic board support John Holland
2010-02-19 22:11 ` [PATCH] 2/3 kirkwood/sheeva: configure SoC SATA interface John Holland
2010-02-19 22:11 ` John Holland [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1266617464.8172.139.camel@oklahoma \
--to=john.holland@cellent-fs.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).