From mboxrd@z Thu Jan 1 00:00:00 1970 From: daniel@caiaq.de (Daniel Mack) Date: Wed, 24 Feb 2010 18:50:16 +0100 Subject: [PATCH] ARM: pxa/raumfeld: set GPIO drive bits for LED pins Message-ID: <1267033816-5331-1-git-send-email-daniel@caiaq.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Set GPIO bits to pull the pins connected to LEDs for lower power mode. We want all LEDs off when devices are in suspend. Signed-off-by: Daniel Mack Cc: Eric Miao --- arch/arm/mach-pxa/raumfeld.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 06717d7..3184bdc 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -231,6 +231,10 @@ static mfp_cfg_t raumfeld_connector_pin_config[] __initdata = { GPIO26_SSP2_FRM, GPIO27_SSP2_TXD, GPIO29_SSP2_EXTCLK, + + /* LEDs */ + GPIO35_GPIO | MFP_LPM_PULL_LOW, + GPIO36_GPIO | MFP_LPM_DRIVE_HIGH, }; static mfp_cfg_t raumfeld_speaker_pin_config[] __initdata = { @@ -277,6 +281,10 @@ static mfp_cfg_t raumfeld_speaker_pin_config[] __initdata = { GPIO87_SSP1_TXD, GPIO88_SSP1_RXD, GPIO90_SSP1_SYSCLK, + + /* LEDs */ + GPIO35_GPIO | MFP_LPM_PULL_LOW, + GPIO36_GPIO | MFP_LPM_DRIVE_HIGH, }; /* -- 1.6.6.2