linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: maramaopercheseimorto@gmail.com (Alberto Panizzo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 7/8] MXC: mach-mx31_3ds: Add support for the keypad.
Date: Tue, 23 Mar 2010 19:57:35 +0100	[thread overview]
Message-ID: <1269370655.3276.177.camel@realization> (raw)
In-Reply-To: <1269370499.3276.174.camel@realization>

The kpp device is not a board private one, so it have to be defined
in devices.c

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
---
 arch/arm/mach-mx3/devices.c       |   19 +++++++++++++++++++
 arch/arm/mach-mx3/devices.h       |    1 +
 arch/arm/mach-mx3/mach-mx31_3ds.c |   32 ++++++++++++++++++++++++++++++++
 3 files changed, 52 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 6adb586..539a08d 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -575,6 +575,25 @@ struct platform_device imx_ssi_device1 = {
 	.resource = imx_ssi_resources1,
 };
 
+static struct resource imx_kpp_resources[] = {
+	{
+		.start	= MX3x_KPP_BASE_ADDR,
+		.end	= MX3x_KPP_BASE_ADDR + 0xf,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= MX3x_INT_KPP,
+		.end	= MX3x_INT_KPP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_kpp_device = {
+	.name = "imx-keypad",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(imx_kpp_resources),
+	.resource = imx_kpp_resources,
+};
+
 static int mx3_devices_init(void)
 {
 	if (cpu_is_mx31()) {
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 42cf175..4ca2a18 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -25,4 +25,5 @@ extern struct platform_device mxc_spi_device1;
 extern struct platform_device mxc_spi_device2;
 extern struct platform_device imx_ssi_device0;
 extern struct platform_device imx_ssi_device1;
+extern struct platform_device imx_kpp_device;
 
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 46ccb6c..258e8d1 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -30,6 +30,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/log2.h>
 #include <linux/err.h>
+#include <linux/input/matrix_keypad.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -109,6 +110,35 @@ static int mx31_3ds_pins[] = {
 	MX31_PIN_HSYNC__HSYNC,
 	MX31_PIN_FPSHIFT__FPSHIFT,
 	MX31_PIN_CONTRAST__CONTRAST,
+	/*Keyboard*/
+	IOMUX_MODE(MX31_PIN_KEY_ROW0, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_KEY_ROW1, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_KEY_ROW2, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_KEY_COL0, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_KEY_COL1, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_KEY_COL2, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_KEY_COL3, IOMUX_CONFIG_FUNC),
+};
+
+/*
+ * Matrix keyboard
+ */
+
+static const uint32_t mx31_3ds_keymap[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(0, 1, KEY_DOWN),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(1, 1, KEY_LEFT),
+	KEY(1, 2, KEY_ENTER),
+	KEY(2, 0, KEY_F6),
+	KEY(2, 1, KEY_F8),
+	KEY(2, 2, KEY_F9),
+	KEY(2, 3, KEY_F10),
+};
+
+static struct matrix_keymap_data mx31_3ds_keymap_data = {
+	.keymap		= mx31_3ds_keymap,
+	.keymap_size	= ARRAY_SIZE(mx31_3ds_keymap),
 };
 
 /*
@@ -609,6 +639,8 @@ static void __init mxc_board_init(void)
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
 
+	mxc_register_device(&imx_kpp_device, &mx31_3ds_keymap_data);
+
 	if (!mx31_3ds_init_expio())
 		platform_device_register(&smsc911x_device);
 }
-- 
1.6.3.3

  reply	other threads:[~2010-03-23 18:57 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-03-23 18:42 [PATCH 0/8] MXC: mach-mx31_3ds: Patch series that enable the support for Freescale i.MX31 3-Stack development board Alberto Panizzo
2010-03-23 18:45 ` Alberto Panizzo
2010-03-23 18:47   ` Alberto Panizzo
2010-03-23 18:46 ` [PATCH 1/8] MXC: mach-mx31_3ds: Update variable names over recent mach name modification Alberto Panizzo
2010-03-23 18:49   ` [PATCH 2/8] MXC: mach-mx31_3ds: Add support for on board NAND Flash Alberto Panizzo
2010-03-23 18:50     ` [PATCH 3/8] MXC: mach-mx31_3ds: Add SPI1 device support Alberto Panizzo
2010-03-23 18:51       ` [PATCH 4/8] MXC: mach-mx31_3ds: add support for freescale mc13783 power management device Alberto Panizzo
2010-03-23 18:53         ` [PATCH 5/8] MXC: mach-mx31_3ds: Add support for SD card slot in the personality board Alberto Panizzo
2010-03-23 18:54           ` [PATCH 6/8] MXC: mach-mx31_3ds: Add support for framebuffer and lcd Alberto Panizzo
2010-03-23 18:57             ` Alberto Panizzo [this message]
2010-03-23 18:58               ` [PATCH 8/8] MXC: mach-mx31_3ds: enable mc13783 touchscreen interface Alberto Panizzo
2010-05-14 12:32               ` [PATCH 7/8] MXC: mach-mx31_3ds: Add support for the keypad Magnus Lilja
2010-05-14 18:12                 ` Alberto Panizzo
2010-05-14 18:56                   ` Magnus Lilja
2010-05-17  9:43                 ` Sascha Hauer
2010-05-17 17:42                   ` Alberto Panizzo
2010-03-24 13:26           ` [PATCH 5/8] MXC: mach-mx31_3ds: Add support for SD card slot in the personality board Mark Brown
2010-03-25  7:27           ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1269370655.3276.177.camel@realization \
    --to=maramaopercheseimorto@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).