From: viresh.kumar@st.com (Viresh KUMAR)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 Resend 04/12] ST SPEAr: Added basic header files for SPEAr platform
Date: Thu, 25 Mar 2010 14:10:47 +0530 [thread overview]
Message-ID: <1269506455-15173-5-git-send-email-viresh.kumar@st.com> (raw)
In-Reply-To: <1269506455-15173-4-git-send-email-viresh.kumar@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
---
arch/arm/plat-spear/include/plat/debug-macro.S | 38 +++++++++++++++++++++
arch/arm/plat-spear/include/plat/gpio.h | 24 +++++++++++++
arch/arm/plat-spear/include/plat/io.h | 22 ++++++++++++
arch/arm/plat-spear/include/plat/memory.h | 20 +++++++++++
arch/arm/plat-spear/include/plat/system.h | 41 ++++++++++++++++++++++
arch/arm/plat-spear/include/plat/timex.h | 19 ++++++++++
arch/arm/plat-spear/include/plat/uncompress.h | 43 ++++++++++++++++++++++++
arch/arm/plat-spear/include/plat/vmalloc.h | 19 ++++++++++
8 files changed, 226 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/plat-spear/include/plat/debug-macro.S
create mode 100644 arch/arm/plat-spear/include/plat/gpio.h
create mode 100644 arch/arm/plat-spear/include/plat/io.h
create mode 100644 arch/arm/plat-spear/include/plat/memory.h
create mode 100644 arch/arm/plat-spear/include/plat/system.h
create mode 100644 arch/arm/plat-spear/include/plat/timex.h
create mode 100644 arch/arm/plat-spear/include/plat/uncompress.h
create mode 100644 arch/arm/plat-spear/include/plat/vmalloc.h
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
new file mode 100644
index 0000000..1670734
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/plat-spear/include/plat/debug-macro.S
+ *
+ * Debugging macro include header for spear platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/amba/serial.h>
+#include <mach/spear.h>
+
+ .macro addruart, rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, =SPEAR_DBG_UART_BASE @ Physical base
+ movne \rx, =VA_SPEAR_DBG_UART_BASE @ Virtual base
+ .endm
+
+ .macro senduart, rd, rx
+ strb \rd, [\rx, #UART01x_DR] @ ASC_TX_BUFFER
+ .endm
+
+ .macro waituart, rd, rx
+1001: ldr \rd, [\rx, #UART01x_FR] @ FLAG REGISTER
+ tst \rd, #UART01x_FR_TXFF @ TX_FULL
+ bne 1001b
+ .endm
+
+ .macro busyuart, rd, rx
+1002: ldr \rd, [\rx, #UART01x_FR] @ FLAG REGISTER
+ tst \rd, #UART011_FR_TXFE @ TX_EMPTY
+ beq 1002b
+ .endm
diff --git a/arch/arm/plat-spear/include/plat/gpio.h b/arch/arm/plat-spear/include/plat/gpio.h
new file mode 100644
index 0000000..b857c91
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/gpio.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/plat-spear/include/plat/gpio.h
+ *
+ * GPIO macros for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_GPIO_H
+#define __PLAT_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
+
+#endif /* __PLAT_GPIO_H */
diff --git a/arch/arm/plat-spear/include/plat/io.h b/arch/arm/plat-spear/include/plat/io.h
new file mode 100644
index 0000000..4d4ba82
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/plat-spear/include/plat/io.h
+ *
+ * IO definitions for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_IO_H
+#define __PLAT_IO_H
+
+#define IO_SPACE_LIMIT 0xFFFFFFFF
+
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#endif /* __PLAT_IO_H */
diff --git a/arch/arm/plat-spear/include/plat/memory.h b/arch/arm/plat-spear/include/plat/memory.h
new file mode 100644
index 0000000..27a4aba
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/memory.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/plat-spear/include/plat/memory.h
+ *
+ * Memory map for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_MEMORY_H
+#define __PLAT_MEMORY_H
+
+/* Physical DRAM offset */
+#define PHYS_OFFSET UL(0x00000000)
+
+#endif /* __PLAT_MEMORY_H */
diff --git a/arch/arm/plat-spear/include/plat/system.h b/arch/arm/plat-spear/include/plat/system.h
new file mode 100644
index 0000000..55a4e40
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/system.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/plat-spear/include/plat/system.h
+ *
+ * SPEAr platform specific architecture functions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_SYSTEM_H
+#define __PLAT_SYSTEM_H
+
+#include <asm/hardware/sp810.h>
+#include <linux/io.h>
+#include <mach/spear.h>
+
+static inline void arch_idle(void)
+{
+ /*
+ * This should do all the clock switching
+ * and wait for interrupt tricks
+ */
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+ if (mode == 's') {
+ /* software reset, Jump into ROM at address 0 */
+ cpu_reset(0);
+ } else {
+ /* hardware reset, Use on-chip reset capability */
+ sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
+ }
+}
+
+#endif /* __PLAT_SYSTEM_H */
diff --git a/arch/arm/plat-spear/include/plat/timex.h b/arch/arm/plat-spear/include/plat/timex.h
new file mode 100644
index 0000000..914d09d
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/timex.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/plat-spear/include/plat/timex.h
+ *
+ * SPEAr platform specific timex definitions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_TIMEX_H
+#define __PLAT_TIMEX_H
+
+#define CLOCK_TICK_RATE 48000000
+
+#endif /* __PLAT_TIMEX_H */
diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h
new file mode 100644
index 0000000..99ba678
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/uncompress.h
@@ -0,0 +1,43 @@
+/*
+ * arch/arm/plat-spear/include/plat/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/io.h>
+#include <linux/amba/serial.h>
+#include <mach/spear.h>
+
+#ifndef __PLAT_UNCOMPRESS_H
+#define __PLAT_UNCOMPRESS_H
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+ void __iomem *base = (void __iomem *)SPEAR_DBG_UART_BASE;
+
+ while (readl(base + UART01x_FR) & UART01x_FR_TXFF)
+ barrier();
+
+ writel(c, base + UART01x_DR);
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif /* __PLAT_UNCOMPRESS_H */
diff --git a/arch/arm/plat-spear/include/plat/vmalloc.h b/arch/arm/plat-spear/include/plat/vmalloc.h
new file mode 100644
index 0000000..09e9372
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/vmalloc.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/plat-spear/include/plat/vmalloc.h
+ *
+ * Defining Vmalloc area for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_VMALLOC_H
+#define __PLAT_VMALLOC_H
+
+#define VMALLOC_END 0xF0000000
+
+#endif /* __PLAT_VMALLOC_H */
--
1.6.0.2
next prev parent reply other threads:[~2010-03-25 8:40 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-25 8:40 [PATCH V2 Resend 00/12] Adding Support for SPEAr Platform under ARM architecture Viresh KUMAR
2010-03-25 8:40 ` [PATCH V2 Resend 01/12] ST SPEAr: Added ARM PrimeXsys System Controller SP810 header file Viresh KUMAR
2010-03-25 8:40 ` [PATCH V2 Resend 02/12] ST SPEAr: Added basic header files for SPEAr3xx machine family Viresh KUMAR
2010-03-25 8:40 ` [PATCH V2 Resend 03/12] ST SPEAr: Added basic header files for SPEAr6xx " Viresh KUMAR
2010-03-25 8:40 ` Viresh KUMAR [this message]
2010-03-25 8:40 ` [PATCH V2 Resend 05/12] ST SPEAr: Added clock framework for SPEAr platform and machines Viresh KUMAR
2010-03-25 8:40 ` [PATCH V2 Resend 06/12] ST SPEAr: Added source files for SPEAr platform Viresh KUMAR
2010-03-25 8:40 ` [PATCH V2 Resend 07/12] ST SPEAr: Added source files for SPEAr3xx machine family Viresh KUMAR
2010-03-25 8:40 ` [PATCH V2 Resend 08/12] ST SPEAr: Added source files for SPEAr6xx " Viresh KUMAR
2010-03-25 8:40 ` [PATCH V2 Resend 09/12] ST SPEAr: Added support for SPEAr platform and machines in arch/arm/ Viresh KUMAR
2010-03-25 8:40 ` [PATCH V2 Resend 10/12] ST SPEAr: Added default configuration files for SPEAr machines Viresh KUMAR
2010-03-25 8:40 ` [PATCH V2 Resend 11/12] ST SPEAr: Updated Maintainers and added Documentation/arm/SPEAr Viresh KUMAR
2010-03-25 8:40 ` [PATCH V2 Resend 12/12] ST SPEAr: Adding gpio pad multiplexing support Viresh KUMAR
2010-04-03 17:14 ` Shiraz HASHIM
2010-04-05 4:24 ` Viresh KUMAR
2010-04-05 7:15 ` Shiraz HASHIM
2010-04-14 10:36 ` [PATCH V2 Resend 05/12] ST SPEAr: Added clock framework for SPEAr platform and machines Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1269506455-15173-5-git-send-email-viresh.kumar@st.com \
--to=viresh.kumar@st.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).