From: Dinh.Nguyen@freescale.com (Dinh.Nguyen at freescale.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv10 2.6.34-rc6 2/5] mx5: Add USB device definitions for Freescale MX51 Babbage HW
Date: Fri, 30 Apr 2010 15:48:24 -0500 [thread overview]
Message-ID: <1272660507-5917-2-git-send-email-Dinh.Nguyen@freescale.com> (raw)
In-Reply-To: <1272660507-5917-1-git-send-email-Dinh.Nguyen@freescale.com>
From: Dinh Nguyen <Dinh.Nguyen@freescale.com>
This patch is part of enabling USB for Freescale MX51 Babbage HW. This
patch adds device structures for USB Host1 and OTG port, and adds
clocking information for USB HW.
This patch applies to 2.6.34-rc6.
Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
---
arch/arm/mach-mx5/clock-mx51.c | 8 ++++++
arch/arm/mach-mx5/devices.c | 49 ++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-mx5/devices.h | 2 +
3 files changed, 59 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
index 8f85f73..dcca330 100644
--- a/arch/arm/mach-mx5/clock-mx51.c
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -761,6 +761,10 @@ DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
NULL, NULL, &ipg_clk, NULL);
+/* USB */
+DEFINE_CLOCK(usboh3_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG14_OFFSET,
+ NULL, NULL, &pll3_sw_clk, NULL);
+
/* FEC */
DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
NULL, NULL, &ipg_clk, NULL);
@@ -778,6 +782,10 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", ahb_clk)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk)
};
static void clk_tree_init(void)
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index 5070ae1..e6262f3 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -11,6 +11,7 @@
*/
#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>
@@ -92,6 +93,54 @@ struct platform_device mxc_fec_device = {
.resource = mxc_fec_resources,
};
+static u64 usb_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource usbotg_resources[] = {
+ {
+ .start = MX51_OTG_BASE_ADDR,
+ .end = MX51_OTG_BASE_ADDR + 0x1ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MX51_MXC_INT_USB_OTG,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_usbdr_host_device = {
+ .name = "mxc-ehci",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(usbotg_resources),
+ .resource = usbotg_resources,
+ .dev = {
+ .dma_mask = &usb_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+static struct resource usbh1_resources[] = {
+ {
+ .start = MX51_OTG_BASE_ADDR + 0x200,
+ .end = MX51_OTG_BASE_ADDR + 0x200 + 0x1ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MX51_MXC_INT_USB_H1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_usbh1_device = {
+ .name = "mxc-ehci",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(usbh1_resources),
+ .resource = usbh1_resources,
+ .dev = {
+ .dma_mask = &usb_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
static struct mxc_gpio_port mxc_gpio_ports[] = {
{
.chip.label = "gpio-0",
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
index f339ab8..95c45f9 100644
--- a/arch/arm/mach-mx5/devices.h
+++ b/arch/arm/mach-mx5/devices.h
@@ -2,3 +2,5 @@ extern struct platform_device mxc_uart_device0;
extern struct platform_device mxc_uart_device1;
extern struct platform_device mxc_uart_device2;
extern struct platform_device mxc_fec_device;
+extern struct platform_device mxc_usbdr_host_device;
+extern struct platform_device mxc_usbh1_device;
--
1.6.0.4
next prev parent reply other threads:[~2010-04-30 20:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-30 20:48 [PATCHv10 2.6.34-rc6 1/5] mxc: Update GPIO for USB support on Freescale MX51 Babbage HW Dinh.Nguyen at freescale.com
2010-04-30 20:48 ` Dinh.Nguyen at freescale.com [this message]
2010-04-30 20:48 ` [PATCHv10 2.6.34-rc6 3/5] mx5: Enable board specific functions for enabling USB host on Babbage Dinh.Nguyen at freescale.com
2010-04-30 20:48 ` [PATCHv10 2.6.34-rc6 4/5] mxc: Add generic USB HW initialization for MX51 Dinh.Nguyen at freescale.com
2010-04-30 20:48 ` [PATCHv10 2.6.34-rc6 5/5] mx5: Add USB to Freescale MX51 defconfig Dinh.Nguyen at freescale.com
2010-05-01 12:21 ` [PATCHv10 2.6.34-rc6 4/5] mxc: Add generic USB HW initialization for MX51 Daniel Mack
2010-05-03 13:21 ` [PATCHv10 2.6.34-rc6 1/5] mxc: Update GPIO for USB support on Freescale MX51 Babbage HW Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1272660507-5917-2-git-send-email-Dinh.Nguyen@freescale.com \
--to=dinh.nguyen@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).