From mboxrd@z Thu Jan  1 00:00:00 1970
From: eric@eukrea.com (=?utf-8?q?Eric=20B=C3=A9nard?=)
Date: Wed, 19 May 2010 18:45:57 +0200
Subject: [PATCH 02/13] eukrea_mbimx27-baseboard: add generic-bl and
	platform-lcd controls
In-Reply-To: <1274287568-30253-1-git-send-email-eric@eukrea.com>
References: <1274287568-30253-1-git-send-email-eric@eukrea.com>
Message-ID: <1274287568-30253-2-git-send-email-eric@eukrea.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Signed-off-by: Eric B?nard <eric@eukrea.com>
---
 arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c |   55 +++++++++++++++++++++++---
 1 files changed, 49 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
index c9e4452..0f201c5 100644
--- a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
@@ -24,6 +24,8 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/backlight.h>
+#include <video/platform_lcd.h>
 
 #include <asm/mach/arch.h>
 
@@ -103,12 +105,6 @@ static struct gpio_led gpio_leds[] = {
 		.active_low		= 1,
 		.gpio			= GPIO_PORTF | 19,
 	},
-	{
-		.name			= "backlight",
-		.default_trigger	= "backlight",
-		.active_low		= 0,
-		.gpio			= GPIO_PORTE | 5,
-	},
 };
 
 static struct gpio_led_platform_data gpio_led_info = {
@@ -153,6 +149,47 @@ static struct imx_fb_platform_data eukrea_mbimx27_fb_data = {
 	.dmacr		= 0x00040060,
 };
 
+static void eukrea_mbimx27_bl_set_intensity(int intensity)
+{
+	if (intensity)
+		gpio_direction_output(GPIO_PORTE | 5, 1);
+	else
+		gpio_direction_output(GPIO_PORTE | 5, 0);
+}
+
+static struct generic_bl_info eukrea_mbimx27_bl_info = {
+	.name			= "eukrea_mbimx27-bl",
+	.max_intensity		= 0xff,
+	.default_intensity	= 0xff,
+	.set_bl_intensity	= eukrea_mbimx27_bl_set_intensity,
+};
+
+static struct platform_device eukrea_mbimx27_bl_dev = {
+	.name			= "generic-bl",
+	.id			= 1,
+	.dev = {
+		.platform_data	= &eukrea_mbimx27_bl_info,
+	},
+};
+
+static void eukrea_mbimx27_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power)
+		gpio_direction_output(GPIO_PORTA | 25, 1);
+	else
+		gpio_direction_output(GPIO_PORTA | 25, 0);
+}
+
+static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = {
+	.set_power		= eukrea_mbimx27_lcd_power_set,
+};
+
+static struct platform_device eukrea_mbimx27_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.platform_data	= &eukrea_mbimx27_lcd_power_data,
+};
+
 static struct imxuart_platform_data uart_pdata[] = {
 	{
 		.flags = IMXUART_HAVE_RTSCTS,
@@ -244,6 +281,12 @@ void __init eukrea_mbimx27_baseboard_init(void)
 	mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
 	/* Backlight */
 	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
+	gpio_request(GPIO_PORTE | 5, "backlight");
+	platform_device_register(&eukrea_mbimx27_bl_dev);
+	/* LCD Reset */
+	mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT);
+	gpio_request(GPIO_PORTA | 25, "lcd_enable");
+	platform_device_register(&eukrea_mbimx27_lcd_powerdev);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
-- 
1.6.3.3