[PATCH v2] eukrea_mbimx27: fix ADS7846 support

[eric@eukrea.com (Eric Bénard)]

Signed-off-by: Eric B?nard <eric@eukrea.com>
---
v2 : fix type in comments
 arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c |   19 ++++++++++++-------
 1 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
index fff6c8d..385abd1 100644
--- a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
@@ -35,6 +35,7 @@
 #include <mach/hardware.h>
 #include <mach/mmc.h>
 #include <mach/imx-uart.h>
+#include <mach/spi.h>
 
 #include "devices.h"
 
@@ -88,7 +89,6 @@ static int eukrea_mbimx27_pins[] = {
 	PA30_PF_CONTRAST,
 	PA31_PF_OE_ACD,
 	/* SPI1 */
-	PD28_PF_CSPI1_SS0,
 	PD29_PF_CSPI1_SCLK,
 	PD30_PF_CSPI1_MISO,
 	PD31_PF_CSPI1_MOSI,
@@ -236,7 +236,7 @@ static struct imxuart_platform_data uart_pdata[] = {
 	},
 };
 
-#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
 	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 
 #define ADS7846_PENDOWN (GPIO_PORTD | 25)
@@ -247,7 +247,6 @@ static void ads7846_dev_init(void)
 		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
 		return;
 	}
-
 	gpio_direction_input(ADS7846_PENDOWN);
 }
 
@@ -260,7 +259,9 @@ static struct ads7846_platform_data ads7846_config __initdata = {
 	.get_pendown_state	= ads7846_get_pendown_state,
 	.keep_vref_on		= 1,
 };
+#endif
 
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
 	[0] = {
 		.modalias	= "ads7846",
@@ -305,15 +306,19 @@ void __init eukrea_mbimx27_baseboard_init(void)
 	mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
 	mxc_register_device(&mxc_sdhc_device0, NULL);
 
-#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
 	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-	/* SPI and ADS7846 Touchscreen controler init */
-	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+	/* ADS7846 Touchscreen controller init */
 	mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
+	ads7846_dev_init();
+#endif
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	/* SPI_CS0 init */
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
 	mxc_register_device(&mxc_spi_device0, &eukrea_mbimx27_spi_0_data);
 	spi_register_board_info(eukrea_mbimx27_spi_board_info,
 			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
-	ads7846_dev_init();
 #endif
 
 	/* Leds configuration */
-- 
1.6.3.3