From: jason77.wang@gmail.com (Jason Wang)
To: linux-arm-kernel@lists.infradead.org
Subject: [V2 3/3] mx51/keypad: add keypad support for i.MX51 platforms
Date: Thu, 3 Jun 2010 20:05:46 +0800 [thread overview]
Message-ID: <1275566746-6510-4-git-send-email-jason77.wang@gmail.com> (raw)
In-Reply-To: <1275566746-6510-3-git-send-email-jason77.wang@gmail.com>
Add keypad controller device definition for all i.MX51 platforms,
add a dummy kpp clock for imx keypad driver and add keypad device
registration on i.MX51 3-stack board.
Signed-off-by: Jason Wang <jason77.wang@gmail.com>
---
arch/arm/mach-mx5/board-mx51_3ds.c | 59 ++++++++++++++++++++++++++++++++++++
arch/arm/mach-mx5/clock-mx51.c | 5 +++
arch/arm/mach-mx5/devices.c | 19 +++++++++++
arch/arm/mach-mx5/devices.h | 1 +
4 files changed, 84 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index 5da90e9..abc9f87 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -16,6 +16,7 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/smsc911x.h>
+#include <linux/input/matrix_keypad.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -54,8 +55,65 @@ static struct pad_desc mx51_3ds_pads[] = {
/* CPLD PARENT IRQ PIN */
MX51_PAD_GPIO_1_6__GPIO1_6,
+
+ /* KPP */
+ MX51_PAD_KEY_ROW0__KEY_ROW0,
+ MX51_PAD_KEY_ROW1__KEY_ROW1,
+ MX51_PAD_KEY_ROW2__KEY_ROW2,
+ MX51_PAD_KEY_ROW3__KEY_ROW3,
+ MX51_PAD_KEY_COL0__KEY_COL0,
+ MX51_PAD_KEY_COL1__KEY_COL1,
+ MX51_PAD_KEY_COL2__KEY_COL2,
+ MX51_PAD_KEY_COL3__KEY_COL3,
+ MX51_PAD_KEY_COL4__KEY_COL4,
+ MX51_PAD_KEY_COL5__KEY_COL5,
+};
+
+#if defined(CONFIG_KEYBOARD_IMX) || defined(CONFIG_KEYBOARD_IMX_MODULE)
+static int mx51_3ds_board_keymap[] = {
+ KEY(0, 0, KEY_1),
+ KEY(0, 1, KEY_2),
+ KEY(0, 2, KEY_3),
+ KEY(0, 3, KEY_F1),
+ KEY(0, 4, KEY_UP),
+ KEY(0, 5, KEY_F2),
+
+ KEY(1, 0, KEY_4),
+ KEY(1, 1, KEY_5),
+ KEY(1, 2, KEY_6),
+ KEY(1, 3, KEY_LEFT),
+ KEY(1, 4, KEY_SELECT),
+ KEY(1, 5, KEY_RIGHT),
+
+ KEY(2, 0, KEY_7),
+ KEY(2, 1, KEY_8),
+ KEY(2, 2, KEY_9),
+ KEY(2, 3, KEY_F3),
+ KEY(2, 4, KEY_DOWN),
+ KEY(2, 5, KEY_F4),
+
+ KEY(3, 0, KEY_0),
+ KEY(3, 1, KEY_OK),
+ KEY(3, 2, KEY_ESC),
+ KEY(3, 3, KEY_ENTER),
+ KEY(3, 4, KEY_MENU),
+ KEY(3, 5, KEY_BACK)
};
+static struct matrix_keymap_data mx51_3ds_map_data = {
+ .keymap = mx51_3ds_board_keymap,
+ .keymap_size = ARRAY_SIZE(mx51_3ds_board_keymap),
+};
+
+static void mxc_init_keypad(void)
+{
+ mxc_register_device(&mxc_keypad_device, &mx51_3ds_map_data);
+}
+#else
+static inline void mxc_init_keypad(void)
+{
+}
+#endif
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
static struct resource smsc911x_resources[] = {
@@ -241,6 +299,7 @@ static void __init mxc_board_init(void)
mxc_init_imx_uart();
mxc_expio_init();
mxc_init_enet();
+ mxc_init_keypad();
}
static void __init mx51_3ds_timer_init(void)
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
index d9f612d..60fced6 100644
--- a/arch/arm/mach-mx5/clock-mx51.c
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -758,6 +758,10 @@ static struct clk gpt_32k_clk = {
.parent = &ckil_clk,
};
+static struct clk kpp_clk = {
+ .id = 0,
+};
+
#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \
static struct clk name = { \
.id = i, \
@@ -821,6 +825,7 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
+ _REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk)
};
static void clk_tree_init(void)
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index 7130449..2aa4ea0 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -168,6 +168,25 @@ struct platform_device mxc_wdt = {
.resource = mxc_wdt_resources,
};
+static struct resource mxc_kpp_resources[] = {
+ {
+ .start = MX51_MXC_INT_KPP,
+ .end = MX51_MXC_INT_KPP,
+ .flags = IORESOURCE_IRQ,
+ } , {
+ .start = MX51_KPP_BASE_ADDR,
+ .end = MX51_KPP_BASE_ADDR + 0x8 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device mxc_keypad_device = {
+ .name = "imx-keypad",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_kpp_resources),
+ .resource = mxc_kpp_resources,
+};
+
static struct mxc_gpio_port mxc_gpio_ports[] = {
{
.chip.label = "gpio-0",
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
index c879ae7..1fef140 100644
--- a/arch/arm/mach-mx5/devices.h
+++ b/arch/arm/mach-mx5/devices.h
@@ -6,3 +6,4 @@ extern struct platform_device mxc_usbdr_host_device;
extern struct platform_device mxc_usbh1_device;
extern struct platform_device mxc_usbdr_udc_device;
extern struct platform_device mxc_wdt;
+extern struct platform_device mxc_keypad_device;
--
1.5.6.5
next prev parent reply other threads:[~2010-06-03 12:05 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-03 12:05 [V2 0/3]Add i.MX51 3-stack board support Jason Wang
2010-06-03 12:05 ` [V2 1/3] mxc: Add support for the imx51 3-stack board Jason Wang
2010-06-03 12:05 ` [V2 2/3] mxc/iomux: add GPIO bank offset for iomux v3 platforms Jason Wang
2010-06-03 12:05 ` Jason Wang [this message]
2010-06-05 9:35 ` [V2 3/3] mx51/keypad: add keypad support for i.MX51 platforms Alberto Panizzo
2010-06-05 14:13 ` jason
2010-06-06 18:11 ` Alberto Panizzo
2010-06-07 23:22 ` jason
2010-06-03 12:39 ` [V2 1/3] mxc: Add support for the imx51 3-stack board Amit Kucheria
2010-06-03 13:57 ` Sascha Hauer
2010-06-03 14:35 ` Amit Kucheria
2010-06-03 14:36 ` jason
2010-06-03 14:39 ` jason
2010-06-04 8:53 ` Sascha Hauer
2010-06-04 9:48 ` Alberto Panizzo
2010-06-04 15:22 ` Sascha Hauer
2010-06-04 10:53 ` Amit Kucheria
2010-06-04 14:09 ` [PATCH] mxc: Fix pad names for imx51 Amit Kucheria
2010-06-07 20:41 ` Troy Kisky
2010-06-07 21:04 ` Amit Kucheria
2010-06-07 21:15 ` Troy Kisky
2010-06-08 6:30 ` Sascha Hauer
2010-06-09 13:09 ` Amit Kucheria
2010-06-10 11:49 ` Sascha Hauer
2010-06-10 13:04 ` jason
2010-06-10 13:59 ` Sascha Hauer
2010-06-10 19:24 ` Amit Kucheria
2010-06-04 12:50 ` [V2 1/3] mxc: Add support for the imx51 3-stack board jason
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1275566746-6510-4-git-send-email-jason77.wang@gmail.com \
--to=jason77.wang@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).