Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>
To: Frank Li <Frank.li@nxp.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	Olivia Mackall <olivia@selenic.com>,
	Herbert Xu <herbert@gondor.apana.org.au>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	linux-m68k@lists.linux-m68k.org, linux-kernel@vger.kernel.org,
	linux-crypto@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 1/2] m68k: coldfire: Mark platform device resource arrays as const
Date: Sat, 08 Nov 2025 09:43:25 +0100	[thread overview]
Message-ID: <12775316.O9o76ZdvQC@jeanmichel-ms7b89> (raw)
In-Reply-To: <aQ4YELHOH/38d2aL@lizhi-Precision-Tower-5810>

Hi Frank,

Le vendredi 7 novembre 2025, 17:02:24 heure normale d’Europe centrale Frank Li 
a écrit :
> On Fri, Nov 07, 2025 at 11:29:43AM +0100, Jean-Michel Hautbois wrote:
> > Add 'const' qualifier to all static resource arrays in device.c.
> > These arrays are never modified at runtime, they are only read by
> > platform device registration functions.
> > 
> > Suggested-by: Frank Li <Frank.Li@nxp.com>
> > Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>
> 
> Reviewed-by: Frank Li <Frank.Li@nxp.com>

Thanks. It must be noted though that it generates warnings when building:

  CC      arch/m68k/coldfire/device.o
arch/m68k/coldfire/device.c:141:35: warning: initialization discards ‘const’ 
qualifier from pointer target type [-Wdiscarded-qualifiers]
  141 |         .resource               = mcf_fec0_resources,
      |                                   ^~~~~~~~~~~~~~~~~~
arch/m68k/coldfire/device.c:178:35: warning: initialization discards ‘const’ 
qualifier from pointer target type [-Wdiscarded-qualifiers]
  178 |         .resource               = mcf_fec1_resources,
      |                                   ^~~~~~~~~~~~~~~~~~
arch/m68k/coldfire/device.c:360:35: warning: initialization discards ‘const’ 
qualifier from pointer target type [-Wdiscarded-qualifiers]
  360 |         .resource               = mcf_i2c0_resources,
      |                                   ^~~~~~~~~~~~~~~~~~
arch/m68k/coldfire/device.c:381:35: warning: initialization discards ‘const’ 
qualifier from pointer target type [-Wdiscarded-qualifiers]
  381 |         .resource               = mcf_i2c1_resources,
      |                                   ^~~~~~~~~~~~~~~~~~
arch/m68k/coldfire/device.c:405:35: warning: initialization discards ‘const’ 
qualifier from pointer target type [-Wdiscarded-qualifiers]
  405 |         .resource               = mcf_i2c2_resources,
      |                                   ^~~~~~~~~~~~~~~~~~
arch/m68k/coldfire/device.c:429:35: warning: initialization discards ‘const’ 
qualifier from pointer target type [-Wdiscarded-qualifiers]
  429 |         .resource               = mcf_i2c3_resources,
      |                                   ^~~~~~~~~~~~~~~~~~
arch/m68k/coldfire/device.c:453:35: warning: initialization discards ‘const’ 
qualifier from pointer target type [-Wdiscarded-qualifiers]
  453 |         .resource               = mcf_i2c4_resources,
      |                                   ^~~~~~~~~~~~~~~~~~
arch/m68k/coldfire/device.c:477:35: warning: initialization discards ‘const’ 
qualifier from pointer target type [-Wdiscarded-qualifiers]
  477 |         .resource               = mcf_i2c5_resources,
      |                                   ^~~~~~~~~~~~~~~~~~
arch/m68k/coldfire/device.c:548:35: warning: initialization discards ‘const’ 
qualifier from pointer target type [-Wdiscarded-qualifiers]
  548 |         .resource               = mcf_edma_resources,
      |                                   ^~~~~~~~~~~~~~~~~~
arch/m68k/coldfire/device.c:579:35: warning: initialization discards ‘const’ 
qualifier from pointer target type [-Wdiscarded-qualifiers]
  579 |         .resource               = mcf_esdhc_resources,
      |                                   ^~~~~~~~~~~~~~~~~~~
arch/m68k/coldfire/device.c:620:21: warning: initialization discards ‘const’ 
qualifier from pointer target type [-Wdiscarded-qualifiers]
  620 |         .resource = mcf5441x_flexcan0_resource,
      |                     ^~~~~~~~~~~~~~~~~~~~~~~~~~

JM

> 
> > ---
> > 
> >  arch/m68k/coldfire/device.c | 24 ++++++++++++------------
> >  1 file changed, 12 insertions(+), 12 deletions(-)
> > 
> > diff --git a/arch/m68k/coldfire/device.c b/arch/m68k/coldfire/device.c
> > index
> > b6958ec2a220cf91a78a14fc7fa18749451412f7..20adba27a687029ef53249bad71b342
> > d563d612b 100644 --- a/arch/m68k/coldfire/device.c
> > +++ b/arch/m68k/coldfire/device.c
> > @@ -111,7 +111,7 @@ static struct fec_platform_data fec_pdata = {
> > 
> >   *	block. It is Freescale's own hardware block. Some ColdFires
> >   *	have 2 of these.
> >   */
> > 
> > -static struct resource mcf_fec0_resources[] = {
> > +static const struct resource mcf_fec0_resources[] = {
> > 
> >  	{
> >  	
> >  		.start		= MCFFEC_BASE0,
> >  		.end		= MCFFEC_BASE0 + MCFFEC_SIZE0 - 
1,
> > 
> > @@ -148,7 +148,7 @@ static struct platform_device mcf_fec0 = {
> > 
> >  #endif /* MCFFEC_BASE0 */
> >  
> >  #ifdef MCFFEC_BASE1
> > 
> > -static struct resource mcf_fec1_resources[] = {
> > +static const struct resource mcf_fec1_resources[] = {
> > 
> >  	{
> >  	
> >  		.start		= MCFFEC_BASE1,
> >  		.end		= MCFFEC_BASE1 + MCFFEC_SIZE1 - 
1,
> > 
> > @@ -189,7 +189,7 @@ static struct platform_device mcf_fec1 = {
> > 
> >   *	The ColdFire QSPI module is an SPI protocol hardware block used
> >   *	on a number of different ColdFire CPUs.
> >   */
> > 
> > -static struct resource mcf_qspi_resources[] = {
> > +static const struct resource mcf_qspi_resources[] = {
> > 
> >  	{
> >  	
> >  		.start		= MCFQSPI_BASE,
> >  		.end		= MCFQSPI_BASE + MCFQSPI_SIZE - 
1,
> > 
> > @@ -340,7 +340,7 @@ static struct platform_device mcf_qspi = {
> > 
> >  #endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
> >  
> >  #if IS_ENABLED(CONFIG_I2C_IMX)
> > 
> > -static struct resource mcf_i2c0_resources[] = {
> > +static const struct resource mcf_i2c0_resources[] = {
> > 
> >  	{
> >  	
> >  		.start          = MCFI2C_BASE0,
> >  		.end            = MCFI2C_BASE0 + MCFI2C_SIZE0 - 1,
> > 
> > @@ -361,7 +361,7 @@ static struct platform_device mcf_i2c0 = {
> > 
> >  };
> >  #ifdef MCFI2C_BASE1
> > 
> > -static struct resource mcf_i2c1_resources[] = {
> > +static const struct resource mcf_i2c1_resources[] = {
> > 
> >  	{
> >  	
> >  		.start          = MCFI2C_BASE1,
> >  		.end            = MCFI2C_BASE1 + MCFI2C_SIZE1 - 1,
> > 
> > @@ -385,7 +385,7 @@ static struct platform_device mcf_i2c1 = {
> > 
> >  #ifdef MCFI2C_BASE2
> > 
> > -static struct resource mcf_i2c2_resources[] = {
> > +static const struct resource mcf_i2c2_resources[] = {
> > 
> >  	{
> >  	
> >  		.start          = MCFI2C_BASE2,
> >  		.end            = MCFI2C_BASE2 + MCFI2C_SIZE2 - 1,
> > 
> > @@ -409,7 +409,7 @@ static struct platform_device mcf_i2c2 = {
> > 
> >  #ifdef MCFI2C_BASE3
> > 
> > -static struct resource mcf_i2c3_resources[] = {
> > +static const struct resource mcf_i2c3_resources[] = {
> > 
> >  	{
> >  	
> >  		.start          = MCFI2C_BASE3,
> >  		.end            = MCFI2C_BASE3 + MCFI2C_SIZE3 - 1,
> > 
> > @@ -433,7 +433,7 @@ static struct platform_device mcf_i2c3 = {
> > 
> >  #ifdef MCFI2C_BASE4
> > 
> > -static struct resource mcf_i2c4_resources[] = {
> > +static const struct resource mcf_i2c4_resources[] = {
> > 
> >  	{
> >  	
> >  		.start          = MCFI2C_BASE4,
> >  		.end            = MCFI2C_BASE4 + MCFI2C_SIZE4 - 1,
> > 
> > @@ -457,7 +457,7 @@ static struct platform_device mcf_i2c4 = {
> > 
> >  #ifdef MCFI2C_BASE5
> > 
> > -static struct resource mcf_i2c5_resources[] = {
> > +static const struct resource mcf_i2c5_resources[] = {
> > 
> >  	{
> >  	
> >  		.start          = MCFI2C_BASE5,
> >  		.end            = MCFI2C_BASE5 + MCFI2C_SIZE5 - 1,
> > 
> > @@ -507,7 +507,7 @@ static struct mcf_edma_platform_data mcf_edma_data = {
> > 
> >  	.slavecnt		= ARRAY_SIZE(mcf_edma_map),
> >  
> >  };
> > 
> > -static struct resource mcf_edma_resources[] = {
> > +static const struct resource mcf_edma_resources[] = {
> > 
> >  	{
> >  	
> >  		.start		= MCFEDMA_BASE,
> >  		.end		= MCFEDMA_BASE + MCFEDMA_SIZE - 
1,
> > 
> > @@ -560,7 +560,7 @@ static struct mcf_esdhc_platform_data mcf_esdhc_data =
> > {> 
> >  	.cd_type = ESDHC_CD_NONE,
> >  
> >  };
> > 
> > -static struct resource mcf_esdhc_resources[] = {
> > +static const struct resource mcf_esdhc_resources[] = {
> > 
> >  	{
> >  	
> >  		.start = MCFSDHC_BASE,
> >  		.end = MCFSDHC_BASE + MCFSDHC_SIZE - 1,
> > 
> > @@ -590,7 +590,7 @@ static struct flexcan_platform_data
> > mcf5441x_flexcan_info = {> 
> >  	.clock_frequency = 120000000,
> >  
> >  };
> > 
> > -static struct resource mcf5441x_flexcan0_resource[] = {
> > +static const struct resource mcf5441x_flexcan0_resource[] = {
> > 
> >  	{
> >  	
> >  		.start = MCFFLEXCAN_BASE0,
> >  		.end = MCFFLEXCAN_BASE0 + MCFFLEXCAN_SIZE,
> > 
> > --
> > 2.39.5






  reply	other threads:[~2025-11-08  8:44 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-07 10:29 [PATCH v2 0/2] m68k: coldfire: Add RNG support and const qualifiers for MCF54418 Jean-Michel Hautbois
2025-11-07 10:29 ` [PATCH v2 1/2] m68k: coldfire: Mark platform device resource arrays as const Jean-Michel Hautbois
2025-11-07 16:02   ` Frank Li
2025-11-08  8:43     ` Jean-Michel Hautbois [this message]
2025-11-07 10:29 ` [PATCH v2 2/2] m68k: coldfire: Add RNG support for MCF54418 Jean-Michel Hautbois
2025-11-07 16:07   ` Frank Li
2025-11-08  8:44     ` Jean-Michel Hautbois
2025-11-10  8:15   ` Geert Uytterhoeven
2025-11-10  8:34     ` Jean-Michel Hautbois
2025-11-10  9:31       ` Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=12775316.O9o76ZdvQC@jeanmichel-ms7b89 \
    --to=jeanmichel.hautbois@yoseli.org \
    --cc=Frank.li@nxp.com \
    --cc=festevam@gmail.com \
    --cc=geert@linux-m68k.org \
    --cc=gerg@linux-m68k.org \
    --cc=herbert@gondor.apana.org.au \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-m68k@lists.linux-m68k.org \
    --cc=olivia@selenic.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox