From: ohad@wizery.com (Ohad Ben-Cohen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 08/15] wireless: wl1271: make wl12xx.h common to both spi and sdio
Date: Tue, 6 Jul 2010 03:37:39 +0300 [thread overview]
Message-ID: <1278376666-3509-9-git-send-email-ohad@wizery.com> (raw)
In-Reply-To: <1278376666-3509-1-git-send-email-ohad@wizery.com>
From: Ohad Ben-Cohen <ohadb@ti.com>
Move wl12xx.h outside of the spi-specific location,
so it can be shared with both spi and sdio solutions.
Signed-off-by: Ohad Ben-Cohen <ohadb@ti.com>
---
drivers/net/wireless/wl12xx/wl1251_sdio.c | 2 +-
drivers/net/wireless/wl12xx/wl1251_spi.c | 2 +-
drivers/net/wireless/wl12xx/wl1271_spi.c | 2 +-
include/linux/spi/wl12xx.h | 34 -----------------------------
include/linux/wl12xx.h | 34 +++++++++++++++++++++++++++++
5 files changed, 37 insertions(+), 37 deletions(-)
delete mode 100644 include/linux/spi/wl12xx.h
create mode 100644 include/linux/wl12xx.h
diff --git a/drivers/net/wireless/wl12xx/wl1251_sdio.c b/drivers/net/wireless/wl12xx/wl1251_sdio.c
index c561332..416d5aa 100644
--- a/drivers/net/wireless/wl12xx/wl1251_sdio.c
+++ b/drivers/net/wireless/wl12xx/wl1251_sdio.c
@@ -24,7 +24,7 @@
#include <linux/mmc/sdio_func.h>
#include <linux/mmc/sdio_ids.h>
#include <linux/platform_device.h>
-#include <linux/spi/wl12xx.h>
+#include <linux/wl12xx.h>
#include <linux/irq.h>
#include "wl1251.h"
diff --git a/drivers/net/wireless/wl12xx/wl1251_spi.c b/drivers/net/wireless/wl12xx/wl1251_spi.c
index e814742..4847b6a 100644
--- a/drivers/net/wireless/wl12xx/wl1251_spi.c
+++ b/drivers/net/wireless/wl12xx/wl1251_spi.c
@@ -26,7 +26,7 @@
#include <linux/slab.h>
#include <linux/crc7.h>
#include <linux/spi/spi.h>
-#include <linux/spi/wl12xx.h>
+#include <linux/wl12xx.h>
#include "wl1251.h"
#include "wl1251_reg.h"
diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.c b/drivers/net/wireless/wl12xx/wl1271_spi.c
index 5189b81..e866049 100644
--- a/drivers/net/wireless/wl12xx/wl1271_spi.c
+++ b/drivers/net/wireless/wl12xx/wl1271_spi.c
@@ -25,7 +25,7 @@
#include <linux/module.h>
#include <linux/crc7.h>
#include <linux/spi/spi.h>
-#include <linux/spi/wl12xx.h>
+#include <linux/wl12xx.h>
#include <linux/slab.h>
#include "wl1271.h"
diff --git a/include/linux/spi/wl12xx.h b/include/linux/spi/wl12xx.h
deleted file mode 100644
index a223ecb..0000000
--- a/include/linux/spi/wl12xx.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (C) 2009 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef _LINUX_SPI_WL12XX_H
-#define _LINUX_SPI_WL12XX_H
-
-struct wl12xx_platform_data {
- void (*set_power)(bool enable);
- /* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
- int irq;
- bool use_eeprom;
-};
-
-#endif
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
new file mode 100644
index 0000000..137ac89
--- /dev/null
+++ b/include/linux/wl12xx.h
@@ -0,0 +1,34 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef _LINUX_WL12XX_H
+#define _LINUX_WL12XX_H
+
+struct wl12xx_platform_data {
+ void (*set_power)(bool enable);
+ /* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
+ int irq;
+ bool use_eeprom;
+};
+
+#endif
--
1.7.0.4
next prev parent reply other threads:[~2010-07-06 0:37 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-06 0:37 [PATCH 00/15] wlan+omap+mmc: out-of-the-box WLAN support for ZOOM2/3 Ohad Ben-Cohen
2010-07-06 0:37 ` [PATCH 01/15] sdio: add TI + wl1271 ids Ohad Ben-Cohen
2010-07-06 0:37 ` [PATCH 02/15] wireless: wl1271: remove SDIO IDs from driver Ohad Ben-Cohen
2010-07-06 7:04 ` Luciano Coelho
2010-07-06 0:37 ` [PATCH 03/15] omap: mmc: prepare for software card detect support Ohad Ben-Cohen
2010-07-06 0:37 ` [PATCH 04/15] mmc: support embedded data field in mmc_host Ohad Ben-Cohen
2010-07-06 15:49 ` Grazvydas Ignotas
2010-07-06 15:54 ` Ohad Ben-Cohen
2010-07-08 3:39 ` Ghorai, Sukumar
2010-07-06 0:37 ` [PATCH 05/15] omap: hsmmc: add virtual card detect support Ohad Ben-Cohen
2010-07-06 1:45 ` Nicolas Pitre
2010-07-06 10:22 ` Ohad Ben-Cohen
2010-07-06 11:02 ` Roger Quadros
2010-07-06 12:02 ` Ohad Ben-Cohen
2010-07-06 11:48 ` Ohad Ben-Cohen
2010-07-06 12:39 ` Roger Quadros
2010-07-06 13:44 ` Ohad Ben-Cohen
2010-07-06 15:34 ` Madhusudhan
2010-07-06 17:00 ` Nicolas Pitre
2010-07-06 0:37 ` [PATCH 06/15] omap zoom2: wlan board muxing Ohad Ben-Cohen
2010-07-06 11:43 ` Tony Lindgren
2010-07-08 3:39 ` Ghorai, Sukumar
2010-07-08 9:45 ` Tony Lindgren
2010-07-08 20:12 ` Ohad Ben-Cohen
2010-07-06 0:37 ` [PATCH 07/15] omap zoom3: " Ohad Ben-Cohen
2010-07-06 0:37 ` Ohad Ben-Cohen [this message]
2010-07-06 7:08 ` [PATCH 08/15] wireless: wl1271: make wl12xx.h common to both spi and sdio Luciano Coelho
2010-07-06 0:37 ` [PATCH 09/15] wireless: wl12xx: support pdata SDIO handlers Ohad Ben-Cohen
2010-07-06 0:37 ` [PATCH 10/15] wireless: wl1271: support return value for the set power func Ohad Ben-Cohen
2010-07-06 7:11 ` Luciano Coelho
2010-07-06 0:37 ` [PATCH 11/15] wireless: wl1271: introduce platform device support Ohad Ben-Cohen
2010-07-06 8:53 ` Roger Quadros
2010-07-06 9:30 ` Ohad Ben-Cohen
2010-07-06 10:35 ` Roger Quadros
2010-07-06 12:53 ` Ohad Ben-Cohen
2010-07-06 14:30 ` Roger Quadros
2010-07-06 17:42 ` Nicolas Pitre
2010-07-06 19:51 ` Adrian Hunter
2010-07-07 8:02 ` Roger Quadros
2010-07-07 14:02 ` Nicolas Pitre
2010-07-07 14:54 ` Madhusudhan
2010-07-07 15:46 ` Nicolas Pitre
2010-07-07 19:59 ` Adrian Hunter
2010-07-08 4:34 ` Nicolas Pitre
2010-07-07 7:48 ` Roger Quadros
2010-07-07 13:52 ` Nicolas Pitre
2010-07-08 8:54 ` Roger Quadros
2010-07-08 20:10 ` Ohad Ben-Cohen
2010-07-09 8:12 ` Roger Quadros
2010-07-09 8:32 ` Ohad Ben-Cohen
2010-07-09 9:24 ` Grazvydas Ignotas
2010-08-10 21:21 ` Ohad Ben-Cohen
2010-07-06 0:37 ` [PATCH 12/15] wireless: wl1271: take irq info from platform data Ohad Ben-Cohen
2010-07-06 0:37 ` [PATCH 13/15] wireless: wl1271: make ref_clock configurable by board Ohad Ben-Cohen
2010-07-06 0:37 ` [PATCH 14/15] omap: zoom: add WLAN device Ohad Ben-Cohen
2010-07-06 12:33 ` Roger Quadros
2010-07-06 13:47 ` Ohad Ben-Cohen
2010-07-08 3:39 ` Ghorai, Sukumar
2010-07-06 0:37 ` [PATCH 15/15] omap: zoom: enable " Ohad Ben-Cohen
2010-07-08 3:39 ` Ghorai, Sukumar
2010-07-08 20:13 ` Ohad Ben-Cohen
2010-07-08 3:39 ` [PATCH 00/15] wlan+omap+mmc: out-of-the-box WLAN support for ZOOM2/3 Ghorai, Sukumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1278376666-3509-9-git-send-email-ohad@wizery.com \
--to=ohad@wizery.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).