[PATCH v2] otg/ulpi.c : fix register write

[eric@eukrea.com (Eric Bénard)]

ulpi_set_vbus and ulpi_set_flags are using ULPI_SET(register) to write
to the PHY's registers, which means we can only set bits in the PHY's
register and not clear them.
By directly using the address of the register without any offset, we
now get the expected behaviour for these functions.

Signed-off-by: Eric B?nard <eric@eukrea.com>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: linux-usb at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: Sascha Hauer <kernel@pengutronix.de>
---
v2 :
drop reg/val swap which is handled in a better way by Igor's patch here :
http://comments.gmane.org/gmane.linux.usb.general/32092 
 
 drivers/usb/otg/ulpi.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c
index b1b3469..086853b 100644
--- a/drivers/usb/otg/ulpi.c
+++ b/drivers/usb/otg/ulpi.c
@@ -54,7 +54,7 @@ static int ulpi_set_flags(struct otg_transceiver *otg)
 	if (otg->flags & USB_OTG_EXT_VBUS_INDICATOR)
 		flags |= ULPI_OTG_CTRL_EXTVBUSIND;
 
-	return otg_io_write(otg, flags, ULPI_SET(ULPI_OTG_CTRL));
+	return otg_io_write(otg, flags, ULPI_OTG_CTRL);
 }
 
 static int ulpi_init(struct otg_transceiver *otg)
@@ -90,7 +90,7 @@ static int ulpi_set_vbus(struct otg_transceiver *otg, bool on)
 			flags |= ULPI_OTG_CTRL_DRVVBUS_EXT;
 	}
 
-	return otg_io_write(otg, flags, ULPI_SET(ULPI_OTG_CTRL));
+	return otg_io_write(otg, flags, ULPI_OTG_CTRL);
 }
 
 struct otg_transceiver *
-- 
1.6.3.3