From: ohad@wizery.com (Ohad Ben-Cohen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 10/20] omap: zoom: add fixed regulator device for wlan
Date: Wed, 21 Jul 2010 20:33:44 +0300 [thread overview]
Message-ID: <1279733634-21974-11-git-send-email-ohad@wizery.com> (raw)
In-Reply-To: <1279733634-21974-1-git-send-email-ohad@wizery.com>
Add a fixed regulator vmmc device to enable power control
of the wl1271 wlan device.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
---
arch/arm/mach-omap2/board-zoom-peripherals.c | 34 ++++++++++++++++++++++++++
1 files changed, 34 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 6b39849..2fc0f4a 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -16,6 +16,7 @@
#include <linux/gpio.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -27,6 +28,8 @@
#include "mux.h"
#include "hsmmc.h"
+#define OMAP_ZOOM_WLAN_PMENA_GPIO (101)
+
/* Zoom2 has Qwerty keyboard*/
static int board_keymap[] = {
KEY(0, 0, KEY_E),
@@ -106,6 +109,10 @@ static struct regulator_consumer_supply zoom_vmmc2_supply = {
.supply = "vmmc",
};
+static struct regulator_consumer_supply zoom_vmmc3_supply = {
+ .supply = "vmmc",
+};
+
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
static struct regulator_init_data zoom_vmmc1 = {
.constraints = {
@@ -151,6 +158,32 @@ static struct regulator_init_data zoom_vsim = {
.consumer_supplies = &zoom_vsim_supply,
};
+static struct regulator_init_data zoom_vmmc3 = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &zoom_vmmc3_supply,
+};
+
+static struct fixed_voltage_config zoom_vwlan = {
+ .supply_name = "vwl1271",
+ .microvolts = 1800000, /* 1.8V */
+ .gpio = OMAP_ZOOM_WLAN_PMENA_GPIO,
+ .startup_delay = 70000, /* 70msec */
+ .enable_high = 1,
+ .enabled_at_boot = 0,
+ .init_data = &zoom_vmmc3,
+};
+
+static struct platform_device omap_vwlan_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &zoom_vwlan,
+ },
+};
+
static struct omap2_hsmmc_info mmc[] __initdata = {
{
.name = "external",
@@ -280,6 +313,7 @@ static void enable_board_wakeup_source(void)
void __init zoom_peripherals_init(void)
{
omap_i2c_init();
+ platform_device_register(&omap_vwlan_device);
usb_musb_init(&musb_board_data);
enable_board_wakeup_source();
}
--
1.7.0.4
next prev parent reply other threads:[~2010-07-21 17:33 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-21 17:33 [PATCH v2 00/20] native support for wl1271 on ZOOM Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 01/20] sdio: add TI + wl1271 ids Ohad Ben-Cohen
2010-07-21 17:58 ` Marcel Holtmann
2010-07-22 23:38 ` Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 02/20] wireless: wl1271: remove SDIO IDs from driver Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 03/20] mmc: support embedded data field in mmc_host Ohad Ben-Cohen
2010-07-28 19:47 ` Vitaly Wool
2010-07-29 6:00 ` Ohad Ben-Cohen
2010-07-29 16:16 ` Vitaly Wool
2010-08-02 15:54 ` Ohad Ben-Cohen
2010-08-02 16:25 ` Vitaly Wool
2010-08-02 21:35 ` Ohad Ben-Cohen
2010-08-03 14:17 ` Vitaly Wool
2010-08-04 11:24 ` Ohad Ben-Cohen
2010-08-04 11:41 ` Russell King - ARM Linux
2010-08-04 12:42 ` Ohad Ben-Cohen
2010-08-04 14:01 ` Vitaly Wool
2010-08-06 7:07 ` Linus Walleij
2010-08-06 10:02 ` Ohad Ben-Cohen
2010-08-06 14:46 ` Russell King - ARM Linux
2010-08-06 16:53 ` Nicolas Pitre
2010-07-21 17:33 ` [PATCH v2 04/20] omap zoom2: wlan board muxing Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 05/20] omap zoom3: " Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 06/20] wireless: wl1271: make wl12xx.h common to both spi and sdio Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 07/20] wireless: wl1271: support return value for the set power func Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 08/20] wireless: wl1271: take irq info from private board data Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 09/20] wireless: wl1271: make ref_clock configurable by board Ohad Ben-Cohen
2010-07-21 17:33 ` Ohad Ben-Cohen [this message]
2010-07-21 17:59 ` [PATCH v2 10/20] omap: zoom: add fixed regulator device for wlan Mark Brown
2010-07-22 11:16 ` Roger Quadros
2010-07-22 23:13 ` Ohad Ben-Cohen
2010-07-23 9:15 ` Mark Brown
2010-07-25 10:40 ` Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 11/20] omap: hsmmc: support mmc3 regulator power control Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 12/20] omap: hsmmc: allow board-specific settings of private mmc data Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 13/20] omap: zoom: add mmc3/wl1271 device support Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 14/20] mmc: sdio: fully reconfigure oldcard on resume Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 15/20] mmc: sdio: verify existence of resume handler Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 16/20] mmc: introduce API to control the card's power Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 17/20] mmc: sdio: relocate sdio_set_block_size call Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 18/20] mmc: sdio: enable a default power off mode of the card Ohad Ben-Cohen
2010-07-22 11:35 ` Roger Quadros
2010-07-25 12:40 ` Ohad Ben-Cohen
2010-07-25 13:56 ` Nicolas Pitre
2010-07-25 14:05 ` Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 19/20] omap: zoom: keep the MMC3 wl1271 device powered off Ohad Ben-Cohen
2010-07-21 18:55 ` Gabay, Benzy
2010-07-22 23:18 ` Ohad Ben-Cohen
2010-07-26 18:33 ` Gabay, Benzy
2010-07-21 17:33 ` [PATCH v2 20/20] wireless: wl1271: call SDIO claim/release power API Ohad Ben-Cohen
2010-07-22 22:56 ` [PATCH v2 00/20] native support for wl1271 on ZOOM Nicolas Pitre
2010-07-22 23:56 ` Ohad Ben-Cohen
2010-07-26 19:30 ` John W. Linville
2010-07-27 9:32 ` Ohad Ben-Cohen
2010-08-02 8:16 ` Luciano Coelho
2010-08-02 11:42 ` Tony Lindgren
2010-08-02 12:08 ` Ohad Ben-Cohen
2010-08-02 15:12 ` Vitaly Wool
2010-08-02 15:59 ` Ohad Ben-Cohen
2010-08-02 16:19 ` Vitaly Wool
2010-08-02 16:40 ` Ohad Ben-Cohen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1279733634-21974-11-git-send-email-ohad@wizery.com \
--to=ohad@wizery.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).