[PATCH 1/3] eukrea_mbimxsd: factorize motherboard support

[PATCH 1/3] eukrea_mbimxsd: factorize motherboard support

[Eric Bénard]

This motherboard is used for both an i.MX25 and an i.MX35 machines
so we can have only one file to support it in plat-mxc.

Signed-off-by: Eric B?nard <eric@eukrea.com>
---
v2 : rebased against last imx-for-2.6.36 branch

 arch/arm/mach-mx25/Kconfig                         |   14 -
 arch/arm/mach-mx25/Makefile                        |    1 -
 arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c      |  261 --------------------
 arch/arm/mach-mx25/mach-cpuimx25.c                 |    2 +-
 arch/arm/mach-mx3/Kconfig                          |   14 -
 arch/arm/mach-mx3/Makefile                         |    1 -
 arch/arm/mach-mx3/mach-cpuimx35.c                  |    2 +-
 arch/arm/plat-mxc/Kconfig                          |    8 +
 arch/arm/plat-mxc/Makefile                         |    1 +
 .../eukrea_mbimxsd-baseboard.c                     |  184 +++++++++++---
 .../plat-mxc/include/mach/board-eukrea_cpuimx35.h  |   40 ---
 ...d-eukrea_cpuimx25.h => board-eukrea_cpuimxsd.h} |   10 +-
 12 files changed, 163 insertions(+), 375 deletions(-)
 delete mode 100644 arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
 rename arch/arm/{mach-mx3 => plat-mxc}/eukrea_mbimxsd-baseboard.c (69%)
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx35.h
 rename arch/arm/plat-mxc/include/mach/{board-eukrea_cpuimx25.h => board-eukrea_cpuimxsd.h} (83%)

diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
index 67e0b54..5f72318 100644
--- a/arch/arm/mach-mx25/Kconfig
+++ b/arch/arm/mach-mx25/Kconfig
@@ -14,18 +14,4 @@ config MACH_EUKREA_CPUIMX25
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select MXC_ULPI if USB_ULPI
 
-choice
-	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX25
-	default MACH_EUKREA_MBIMXSD_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD_BASEBOARD
-	prompt "Eukrea MBIMXSD development board"
-	bool
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMXSD evaluation board.
-
-endchoice
-
 endif
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
index 87ffb9c..6ba07b6 100644
--- a/arch/arm/mach-mx25/Makefile
+++ b/arch/arm/mach-mx25/Makefile
@@ -2,4 +2,3 @@ obj-y				:= mm.o devices.o
 obj-$(CONFIG_ARCH_MX25)		+= clock.o
 obj-$(CONFIG_MACH_MX25_3DS)	+= mach-mx25_3ds.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX25)		+= mach-cpuimx25.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD)	+= eukrea_mbimxsd-baseboard.o
diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
deleted file mode 100644
index f07b1f9..0000000
--- a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- * Copyright (C) 2010 Eric Benard - eric at eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel at pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <video/platform_lcd.h>
-
-#include <mach/board-eukrea_cpuimx25.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx25.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/mx25.h>
-#include <mach/imx-uart.h>
-#include <mach/imxfb.h>
-#include <mach/ssi.h>
-#include <mach/audmux.h>
-
-#include "devices-imx25.h"
-#include "devices.h"
-
-static struct pad_desc eukrea_mbimxsd_pads[] = {
-	/* LCD */
-	MX25_PAD_LD0__LD0,
-	MX25_PAD_LD1__LD1,
-	MX25_PAD_LD2__LD2,
-	MX25_PAD_LD3__LD3,
-	MX25_PAD_LD4__LD4,
-	MX25_PAD_LD5__LD5,
-	MX25_PAD_LD6__LD6,
-	MX25_PAD_LD7__LD7,
-	MX25_PAD_LD8__LD8,
-	MX25_PAD_LD9__LD9,
-	MX25_PAD_LD10__LD10,
-	MX25_PAD_LD11__LD11,
-	MX25_PAD_LD12__LD12,
-	MX25_PAD_LD13__LD13,
-	MX25_PAD_LD14__LD14,
-	MX25_PAD_LD15__LD15,
-	MX25_PAD_GPIO_E__LD16,
-	MX25_PAD_GPIO_F__LD17,
-	MX25_PAD_HSYNC__HSYNC,
-	MX25_PAD_VSYNC__VSYNC,
-	MX25_PAD_LSCLK__LSCLK,
-	MX25_PAD_OE_ACD__OE_ACD,
-	MX25_PAD_CONTRAST__CONTRAST,
-	/* LCD_PWR */
-	MX25_PAD_PWM__GPIO_1_26,
-	/* LED */
-	MX25_PAD_POWER_FAIL__GPIO_3_19,
-	/* SWITCH */
-	MX25_PAD_VSTBY_ACK__GPIO_3_18,
-	/* UART2 */
-	MX25_PAD_UART2_RTS__UART2_RTS,
-	MX25_PAD_UART2_CTS__UART2_CTS,
-	MX25_PAD_UART2_TXD__UART2_TXD,
-	MX25_PAD_UART2_RXD__UART2_RXD,
-	/* SD1 */
-	MX25_PAD_SD1_CMD__SD1_CMD,
-	MX25_PAD_SD1_CLK__SD1_CLK,
-	MX25_PAD_SD1_DATA0__SD1_DATA0,
-	MX25_PAD_SD1_DATA1__SD1_DATA1,
-	MX25_PAD_SD1_DATA2__SD1_DATA2,
-	MX25_PAD_SD1_DATA3__SD1_DATA3,
-	/* SD1 CD */
-	MX25_PAD_DE_B__GPIO_2_20,
-	/* I2S */
-	MX25_PAD_KPP_COL3__AUD5_TXFS,
-	MX25_PAD_KPP_COL2__AUD5_TXC,
-	MX25_PAD_KPP_COL1__AUD5_RXD,
-	MX25_PAD_KPP_COL0__AUD5_TXD,
-};
-
-#define GPIO_LED1	83
-#define GPIO_SWITCH1	82
-#define GPIO_SD1CD	52
-#define GPIO_LCDPWR	26
-
-static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
-	{
-		.mode	= {
-			.name		= "CMO-QVGA",
-			.refresh	= 60,
-			.xres		= 320,
-			.yres		= 240,
-			.pixclock	= KHZ2PICOS(6500),
-			.left_margin	= 30,
-			.right_margin	= 38,
-			.upper_margin	= 20,
-			.lower_margin	= 3,
-			.hsync_len	= 15,
-			.vsync_len	= 4,
-		},
-		.bpp	= 16,
-		.pcr	= 0xCAD08B80,
-	},
-};
-
-static struct imx_fb_platform_data eukrea_mximxsd_fb_pdata = {
-	.mode		= eukrea_mximxsd_modes,
-	.num_modes	= ARRAY_SIZE(eukrea_mximxsd_modes),
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00040060,
-};
-
-static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power)
-		gpio_direction_output(GPIO_LCDPWR, 1);
-	else
-		gpio_direction_output(GPIO_LCDPWR, 0);
-}
-
-static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
-	.set_power		= eukrea_mbimxsd_lcd_power_set,
-};
-
-static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.platform_data	= &eukrea_mbimxsd_lcd_power_data,
-};
-
-static struct gpio_led eukrea_mbimxsd_leds[] = {
-	{
-		.name			= "led1",
-		.default_trigger	= "heartbeat",
-		.active_low		= 1,
-		.gpio			= GPIO_LED1,
-	},
-};
-
-static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
-	.leds		= eukrea_mbimxsd_leds,
-	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
-};
-
-static struct platform_device eukrea_mbimxsd_leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &eukrea_mbimxsd_led_info,
-	},
-};
-
-static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
-	{
-		.gpio		= GPIO_SWITCH1,
-		.code		= BTN_0,
-		.desc		= "BP1",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-};
-
-static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
-	.buttons	= eukrea_mbimxsd_gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
-};
-
-static struct platform_device eukrea_mbimxsd_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &eukrea_mbimxsd_button_data,
-	}
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&eukrea_mbimxsd_leds_gpio,
-	&eukrea_mbimxsd_button_device,
-	&eukrea_mbimxsd_lcd_powerdev,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-};
-
-struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
-	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
-};
-
-/*
- * system init for baseboard usage. Will be called by cpuimx25 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimxsd_baseboard_init(void)
-{
-	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
-			ARRAY_SIZE(eukrea_mbimxsd_pads)))
-		printk(KERN_ERR "error setting mbimxsd pads !\n");
-
-#if defined(CONFIG_SND_SOC_EUKREA_TLV320)
-	/* SSI unit master I2S codec connected to SSI_AUD5*/
-	mxc_audmux_v2_configure_port(0,
-			MXC_AUDMUX_V2_PTCR_SYN |
-			MXC_AUDMUX_V2_PTCR_TFSDIR |
-			MXC_AUDMUX_V2_PTCR_TFSEL(4) |
-			MXC_AUDMUX_V2_PTCR_TCLKDIR |
-			MXC_AUDMUX_V2_PTCR_TCSEL(4),
-			MXC_AUDMUX_V2_PDCR_RXDSEL(4)
-	);
-	mxc_audmux_v2_configure_port(4,
-			MXC_AUDMUX_V2_PTCR_SYN,
-			MXC_AUDMUX_V2_PDCR_RXDSEL(0)
-	);
-#endif
-
-	imx25_add_imx_uart1(&uart_pdata);
-	mxc_register_device(&mx25_fb_device, &eukrea_mximxsd_fb_pdata);
-	mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata);
-
-	gpio_request(GPIO_LED1, "LED1");
-	gpio_direction_output(GPIO_LED1, 1);
-	gpio_free(GPIO_LED1);
-
-	gpio_request(GPIO_SWITCH1, "SWITCH1");
-	gpio_direction_input(GPIO_SWITCH1);
-	gpio_free(GPIO_SWITCH1);
-
-	gpio_request(GPIO_LCDPWR, "LCDPWR");
-	gpio_direction_output(GPIO_LCDPWR, 1);
-	gpio_free(GPIO_SWITCH1);
-
-	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
-				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c
index d39f9cc..526928f 100644
--- a/arch/arm/mach-mx25/mach-cpuimx25.c
+++ b/arch/arm/mach-mx25/mach-cpuimx25.c
@@ -29,7 +29,7 @@
 #include <linux/usb/ulpi.h>
 #include <linux/fsl_devices.h>
 
-#include <mach/board-eukrea_cpuimx25.h>
+#include <mach/board-eukrea_cpuimxsd.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index e063657..68b841e 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -163,18 +163,4 @@ config MACH_EUKREA_CPUIMX35
 	  Include support for Eukrea CPUIMX35 platform. This includes
 	  specific configurations for the board and its peripherals.
 
-choice
-	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX35
-	default MACH_EUKREA_MBIMXSD_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD_BASEBOARD
-	prompt "Eukrea MBIMXSD development board"
-	bool
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMXSD evaluation board.
-
-endchoice
-
 endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 54bc935..28fa1f2 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -25,4 +25,3 @@ obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
 obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35_3ds.o
 obj-$(CONFIG_MACH_KZM_ARM11_01)	+= mach-kzm_arm11_01.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX35)	+= mach-cpuimx35.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD)	+= eukrea_mbimxsd-baseboard.o
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index 4f6146d..a7ecd7b 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -37,7 +37,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
 
-#include <mach/board-eukrea_cpuimx35.h>
+#include <mach/board-eukrea_cpuimxsd.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-mx35.h>
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 0527e65..26708b0 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -91,6 +91,14 @@ config MXC_DEBUG_BOARD
 	  data/address de-multiplexing and decode, signal level shift,
 	  interrupt control and various board functions.
 
+config MACH_EUKREA_MBIMXSD_BASEBOARD
+	prompt "Eukrea MBIMXSD development board"
+	depends on MACH_EUKREA_CPUIMX25 || MACH_EUKREA_CPUIMX35
+	bool
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
 config MXC_ULPI
 	bool
 
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 78d405e..2d31132 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_MXC_ULPI) += ulpi.o
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
 obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD)	+= eukrea_mbimxsd-baseboard.o
 ifdef CONFIG_SND_IMX_SOC
 obj-y += ssi-fiq.o
 obj-y += ssi-fiq-ksym.o
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/plat-mxc/eukrea_mbimxsd-baseboard.c
similarity index 69%
rename from arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
rename to arch/arm/plat-mxc/eukrea_mbimxsd-baseboard.c
index 368a603..57e8e7b 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/plat-mxc/eukrea_mbimxsd-baseboard.c
@@ -36,49 +36,119 @@
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
 
-#include <mach/board-eukrea_cpuimx35.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
+#include <mach/board-eukrea_cpuimxsd.h>
+
+#if defined(CONFIG_MACH_EUKREA_CPUIMX25)
+#include <mach/iomux-mx25.h>
+#include <mach/mx25.h>
+#include <mach/imxfb.h>
+#include "../mach-mx25/devices-imx25.h"
+#include "../mach-mx25/devices.h"
+#endif
+
+#if defined(CONFIG_MACH_EUKREA_CPUIMX35)
 #include <mach/iomux-mx35.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
-#include <mach/audmux.h>
+#include "../mach-mx3/devices-imx35.h"
+#include "../mach-mx3/devices.h"
+#endif
+
+#include <mach/imx-uart.h>
 #include <mach/ssi.h>
+#include <mach/audmux.h>
 
-#include "devices-imx35.h"
-#include "devices.h"
+#if defined(CONFIG_MACH_EUKREA_CPUIMX25)
+static struct pad_desc eukrea_mbimxsd_pads[] = {
+	/* LCD */
+	MX25_PAD_LD0__LD0,
+	MX25_PAD_LD1__LD1,
+	MX25_PAD_LD2__LD2,
+	MX25_PAD_LD3__LD3,
+	MX25_PAD_LD4__LD4,
+	MX25_PAD_LD5__LD5,
+	MX25_PAD_LD6__LD6,
+	MX25_PAD_LD7__LD7,
+	MX25_PAD_LD8__LD8,
+	MX25_PAD_LD9__LD9,
+	MX25_PAD_LD10__LD10,
+	MX25_PAD_LD11__LD11,
+	MX25_PAD_LD12__LD12,
+	MX25_PAD_LD13__LD13,
+	MX25_PAD_LD14__LD14,
+	MX25_PAD_LD15__LD15,
+	MX25_PAD_GPIO_E__LD16,
+	MX25_PAD_GPIO_F__LD17,
+	MX25_PAD_HSYNC__HSYNC,
+	MX25_PAD_VSYNC__VSYNC,
+	MX25_PAD_LSCLK__LSCLK,
+	MX25_PAD_OE_ACD__OE_ACD,
+	MX25_PAD_CONTRAST__CONTRAST,
+	/* LCD_PWR */
+	MX25_PAD_PWM__GPIO_1_26,
+	/* LED */
+	MX25_PAD_POWER_FAIL__GPIO_3_19,
+	/* SWITCH */
+	MX25_PAD_VSTBY_ACK__GPIO_3_18,
+	/* UART2 */
+	MX25_PAD_UART2_RTS__UART2_RTS,
+	MX25_PAD_UART2_CTS__UART2_CTS,
+	MX25_PAD_UART2_TXD__UART2_TXD,
+	MX25_PAD_UART2_RXD__UART2_RXD,
+	/* SD1 */
+	MX25_PAD_SD1_CMD__SD1_CMD,
+	MX25_PAD_SD1_CLK__SD1_CLK,
+	MX25_PAD_SD1_DATA0__SD1_DATA0,
+	MX25_PAD_SD1_DATA1__SD1_DATA1,
+	MX25_PAD_SD1_DATA2__SD1_DATA2,
+	MX25_PAD_SD1_DATA3__SD1_DATA3,
+	/* SD1 CD */
+	MX25_PAD_DE_B__GPIO_2_20,
+	/* I2S */
+	MX25_PAD_KPP_COL3__AUD5_TXFS,
+	MX25_PAD_KPP_COL2__AUD5_TXC,
+	MX25_PAD_KPP_COL1__AUD5_RXD,
+	MX25_PAD_KPP_COL0__AUD5_TXD,
+};
 
-static const struct fb_videomode fb_modedb[] = {
+#define GPIO_LED1	83
+#define GPIO_SWITCH1	82
+#define GPIO_SD1CD	52
+#define GPIO_LCDPWR	26
+#define SSI_PORT	4
+
+static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
 	{
-		.name		= "CMO_QVGA",
-		.refresh	= 60,
-		.xres		= 320,
-		.yres		= 240,
-		.pixclock	= KHZ2PICOS(6500),
-		.left_margin	= 68,
-		.right_margin	= 20,
-		.upper_margin	= 15,
-		.lower_margin	= 4,
-		.hsync_len	= 30,
-		.vsync_len	= 3,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
+		.mode	= {
+			.name		= "CMO-QVGA",
+			.refresh	= 60,
+			.xres		= 320,
+			.yres		= 240,
+			.pixclock	= KHZ2PICOS(6500),
+			.left_margin	= 30,
+			.right_margin	= 38,
+			.upper_margin	= 20,
+			.lower_margin	= 3,
+			.hsync_len	= 15,
+			.vsync_len	= 4,
+		},
+		.bpp	= 16,
+		.pcr	= 0xCAD08B80,
 	},
 };
 
-static struct ipu_platform_data mx3_ipu_data = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static struct mx3fb_platform_data mx3fb_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
-	.name		= "CMO_QVGA",
-	.mode		= fb_modedb,
-	.num_modes	= ARRAY_SIZE(fb_modedb),
+static struct imx_fb_platform_data eukrea_mximxsd_fb_pdata = {
+	.mode		= eukrea_mximxsd_modes,
+	.num_modes	= ARRAY_SIZE(eukrea_mximxsd_modes),
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00040060,
 };
+#endif
 
+#if defined(CONFIG_MACH_EUKREA_CPUIMX35)
 static struct pad_desc eukrea_mbimxsd_pads[] = {
 	/* LCD */
 	MX35_PAD_LD0__IPU_DISPB_DAT_0,
@@ -126,6 +196,38 @@ static struct pad_desc eukrea_mbimxsd_pads[] = {
 #define GPIO_LED1	(2 * 32 + 29)
 #define GPIO_SWITCH1	(2 * 32 + 25)
 #define GPIO_LCDPWR	(4)
+#define SSI_PORT	(3)
+
+static const struct fb_videomode fb_modedb[] = {
+	{
+		.name		= "CMO_QVGA",
+		.refresh	= 60,
+		.xres		= 320,
+		.yres		= 240,
+		.pixclock	= KHZ2PICOS(6500),
+		.left_margin	= 68,
+		.right_margin	= 20,
+		.upper_margin	= 15,
+		.lower_margin	= 4,
+		.hsync_len	= 30,
+		.vsync_len	= 3,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "CMO_QVGA",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+#endif
 
 static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
 				   unsigned int power)
@@ -207,12 +309,14 @@ static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
 	},
 };
 
+#if defined(CONFIG_SND_SOC_EUKREA_TLV320)
 struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
 	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
 };
+#endif
 
 /*
- * system init for baseboard usage. Will be called by cpuimx35 init.
+ * system init for baseboard usage. Will be called by cpuimxX5 init.
  *
  * Add platform devices present on this baseboard and init
  * them from CPU side as far as required to use them later on
@@ -224,26 +328,32 @@ void __init eukrea_mbimxsd_baseboard_init(void)
 		printk(KERN_ERR "error setting mbimxsd pads !\n");
 
 #if defined(CONFIG_SND_SOC_EUKREA_TLV320)
-	/* SSI unit master I2S codec connected to SSI_AUD4 */
+	/* SSI unit master I2S codec connected to SSI_AUD */
 	mxc_audmux_v2_configure_port(0,
 			MXC_AUDMUX_V2_PTCR_SYN |
 			MXC_AUDMUX_V2_PTCR_TFSDIR |
-			MXC_AUDMUX_V2_PTCR_TFSEL(3) |
+			MXC_AUDMUX_V2_PTCR_TFSEL(SSI_PORT) |
 			MXC_AUDMUX_V2_PTCR_TCLKDIR |
-			MXC_AUDMUX_V2_PTCR_TCSEL(3),
-			MXC_AUDMUX_V2_PDCR_RXDSEL(3)
+			MXC_AUDMUX_V2_PTCR_TCSEL(SSI_PORT),
+			MXC_AUDMUX_V2_PDCR_RXDSEL(SSI_PORT)
 	);
-	mxc_audmux_v2_configure_port(3,
+	mxc_audmux_v2_configure_port(SSI_PORT,
 			MXC_AUDMUX_V2_PTCR_SYN,
 			MXC_AUDMUX_V2_PDCR_RXDSEL(0)
 	);
+	mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata);
 #endif
 
+#if defined(CONFIG_MACH_EUKREA_CPUIMX25)
+	imx25_add_imx_uart1(&uart_pdata);
+	mxc_register_device(&mx25_fb_device, &eukrea_mximxsd_fb_pdata);
+#endif
+
+#if defined(CONFIG_MACH_EUKREA_CPUIMX35)
 	imx35_add_imx_uart1(&uart_pdata);
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
-
-	mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata);
+#endif
 
 	gpio_request(GPIO_LED1, "LED1");
 	gpio_direction_output(GPIO_LED1, 1);
diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx35.h b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx35.h
deleted file mode 100644
index 116eee7..0000000
--- a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx35.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Copyright (C) 2010 Eric Benard - eric at eukrea.com
- *
- * Based on board-pcm038.h which is :
- * Copyright (C) 2008 Juergen Beisert (kernel at pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX35_H__
-#define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX35_H__
-
-#ifndef __ASSEMBLY__
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
- * TODO: Add your own baseboard init function and call it from
- * inside eukrea_cpuimx25_init().
- *
- * This example here is for the development board. Refer
- * eukrea_mbimx25-baseboard.c
- */
-
-extern void eukrea_mbimxsd_baseboard_init(void);
-
-#endif
-
-#endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX35_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx25.h b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimxsd.h
similarity index 83%
rename from arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx25.h
rename to arch/arm/plat-mxc/include/mach/board-eukrea_cpuimxsd.h
index 5c9901e..96789b1 100644
--- a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx25.h
+++ b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimxsd.h
@@ -19,22 +19,22 @@
  * MA 02110-1301, USA.
  */
 
-#ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX25_H__
-#define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX25_H__
+#ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMXSD_H__
+#define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMXSD_H__
 
 #ifndef __ASSEMBLY__
 /*
  * This CPU module needs a baseboard to work. After basic initializing
  * its own devices, it calls baseboard's init function.
  * TODO: Add your own baseboard init function and call it from
- * inside eukrea_cpuimx25_init().
+ * inside eukrea_cpuimx25_init() or eukrea_cpuimx35_init().
  *
  * This example here is for the development board. Refer
- * eukrea_mbimx25-baseboard.c
+ * eukrea_mbimxsd-baseboard.c
  */
 
 extern void eukrea_mbimxsd_baseboard_init(void);
 
 #endif
 
-#endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX25_H__ */
+#endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMXSD_H__ */
-- 
1.6.3.3

[PATCH 2/3] imx25: fix low level debug

[Eric Bénard]

DEBUG_LL is actually broken on i.MX25, this patch fix it.

Signed-off-by: Eric B?nard <eric@eukrea.com>
---
 arch/arm/mach-mx25/clock.c                   |    3 +++
 arch/arm/plat-mxc/include/mach/debug-macro.S |    4 ++--
 arch/arm/plat-mxc/include/mach/mx25.h        |    8 +++-----
 3 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
index 1a58cae..02f8247 100644
--- a/arch/arm/mach-mx25/clock.c
+++ b/arch/arm/mach-mx25/clock.c
@@ -292,6 +292,9 @@ int __init mx25_clocks_init(void)
 	__raw_writel((1 << 19), CRM_BASE + CCM_CGCR0);
 	__raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
 	__raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
+	clk_enable(&uart1_clk);
+#endif
 
 	/* Clock source for lcdc and csi is upll */
 	__raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0),
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 0b6e11e..2560640 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -23,8 +23,8 @@
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
 #include <mach/mx25.h>
-#define UART_PADDR	UART1_BASE_ADDR
-#define UART_VADDR	MX25_AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+#define UART_PADDR	MX25_UART1_BASE_ADDR
+#define UART_VADDR	MX25_AIPS1_IO_ADDRESS(MX25_UART1_BASE_ADDR)
 #endif
 
 #ifdef CONFIG_ARCH_MX2
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index 2f2aad1..11b044f 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -31,6 +31,9 @@
 	IMX_IO_ADDRESS(x, MX25_AIPS2) ?:			\
 	IMX_IO_ADDRESS(x, MX25_AVIC))
 
+#define MX25_AIPS1_IO_ADDRESS(x) \
+	(((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
+
 #define MX25_UART1_BASE_ADDR		0x43f90000
 #define MX25_UART2_BASE_ADDR		0x43f94000
 #define MX25_AUDMUX_BASE_ADDR		0x43fb0000
@@ -70,9 +73,4 @@
 #define MX25_INT_UART1		45
 #define MX25_INT_FEC		57
 
-#if defined(IMX_NEEDS_DEPRECATED_SYMBOLS)
-#define UART1_BASE_ADDR			MX25_UART1_BASE_ADDR
-#define UART2_BASE_ADDR			MX25_UART2_BASE_ADDR
-#endif
-
 #endif /* ifndef __MACH_MX25_H__ */
-- 
1.6.3.3

[PATCH 3/3] imxfb: add pwmr controlled backlight support

[Eric Bénard]

Signed-off-by: Eric B?nard <eric@eukrea.com>
---
v2 : updated to use backlight infrastructure

 drivers/video/imxfb.c |   72 ++++++++++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 71 insertions(+), 1 deletions(-)

diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index b4b6dec..43f0639 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -175,6 +175,7 @@ struct imxfb_info {
 
 	struct imx_fb_videomode *mode;
 	int			num_modes;
+	struct backlight_device *bl;
 
 	void (*lcd_power)(int);
 	void (*backlight_power)(int);
@@ -449,6 +450,73 @@ static int imxfb_set_par(struct fb_info *info)
 	return 0;
 }
 
+
+
+static int imxfb_bl_get_brightness(struct backlight_device *bl)
+{
+	struct imxfb_info *fbi = bl_get_data(bl);
+
+	return readl(fbi->regs + LCDC_PWMR) & 0xFF;
+}
+
+static int imxfb_bl_update_status(struct backlight_device *bl)
+{
+	struct imxfb_info *fbi = bl_get_data(bl);
+	int brightness = bl->props.brightness;
+
+	if (bl->props.power != FB_BLANK_UNBLANK)
+		brightness = 0;
+	if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+		brightness = 0;
+
+	fbi->pwmr = (fbi->pwmr & ~0xFF) | brightness;
+
+	if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+		clk_enable(fbi->clk);
+	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
+	if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+		clk_disable(fbi->clk);
+
+	return 0;
+}
+
+static const struct backlight_ops imxfb_lcdc_bl_ops = {
+	.update_status = imxfb_bl_update_status,
+	.get_brightness = imxfb_bl_get_brightness,
+};
+
+static void imxfb_init_backlight(struct imxfb_info *fbi)
+{
+	struct backlight_properties props;
+	struct backlight_device	*bl;
+
+	if (fbi->bl)
+		return;
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 0xff;
+	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
+
+	bl = backlight_device_register("imxfb-bl", &fbi->pdev->dev, fbi,
+				       &imxfb_lcdc_bl_ops, &props);
+	if (IS_ERR(bl)) {
+		dev_err(&fbi->pdev->dev, "error %ld on backlight register\n",
+				PTR_ERR(bl));
+		return;
+	}
+
+	fbi->bl = bl;
+	bl->props.power = FB_BLANK_UNBLANK;
+	bl->props.fb_blank = FB_BLANK_UNBLANK;
+	bl->props.brightness = imxfb_bl_get_brightness(bl);
+}
+
+static void imxfb_exit_backlight(struct imxfb_info *fbi)
+{
+	if (fbi->bl)
+		backlight_device_unregister(fbi->bl);
+}
+
 static void imxfb_enable_controller(struct imxfb_info *fbi)
 {
 	pr_debug("Enabling LCD controller\n");
@@ -579,7 +647,6 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
 			fbi->regs + LCDC_SIZE);
 
 	writel(fbi->pcr, fbi->regs + LCDC_PCR);
-	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
 	writel(fbi->lscr1, fbi->regs + LCDC_LSCR1);
 	writel(fbi->dmacr, fbi->regs + LCDC_DMACR);
 
@@ -779,6 +846,8 @@ static int __init imxfb_probe(struct platform_device *pdev)
 	}
 
 	imxfb_enable_controller(fbi);
+	fbi->pdev = pdev;
+	imxfb_init_backlight(fbi);
 
 	return 0;
 
@@ -816,6 +885,7 @@ static int __devexit imxfb_remove(struct platform_device *pdev)
 
 	imxfb_disable_controller(fbi);
 
+	imxfb_exit_backlight(fbi);
 	unregister_framebuffer(info);
 
 	pdata = pdev->dev.platform_data;
-- 
1.6.3.3

[PATCH 3/3] imxfb: add pwmr controlled backlight support

[Uwe Kleine-König]

Hello Eric,

> Signed-off-by: Eric B?nard <eric@eukrea.com>
> ---
> v2 : updated to use backlight infrastructure
this should have a dependency on CONFIG_BACKLIGHT_CLASS_DEVICE.  As
Sascha already took your patch you can just try to build mx27_defconfig
on his for-rmk branch :-|

Instead of a dependency I would prefer to have imxfb usable without
CONFIG_BACKLIGHT_CLASS_DEVICE.  From a quick look there are drivers that
have that.  (I checked drivers/video/sa1100fb.c +
drivers/video/backlight/locomolcd.c.)

-- 
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[PATCH] video/imxfb.c: allow usage without BACKLIGHT_CLASS_DEVICE

[Eric Bénard]

Signed-off-by: Eric B?nard <eric@eukrea.com>
---
 drivers/video/imxfb.c |   13 +++++++++++--
 1 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 43f0639..0c2fb4d 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -175,7 +175,9 @@ struct imxfb_info {
 
 	struct imx_fb_videomode *mode;
 	int			num_modes;
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
 	struct backlight_device *bl;
+#endif
 
 	void (*lcd_power)(int);
 	void (*backlight_power)(int);
@@ -450,8 +452,7 @@ static int imxfb_set_par(struct fb_info *info)
 	return 0;
 }
 
-
-
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
 static int imxfb_bl_get_brightness(struct backlight_device *bl)
 {
 	struct imxfb_info *fbi = bl_get_data(bl);
@@ -516,6 +517,7 @@ static void imxfb_exit_backlight(struct imxfb_info *fbi)
 	if (fbi->bl)
 		backlight_device_unregister(fbi->bl);
 }
+#endif
 
 static void imxfb_enable_controller(struct imxfb_info *fbi)
 {
@@ -647,6 +649,9 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
 			fbi->regs + LCDC_SIZE);
 
 	writel(fbi->pcr, fbi->regs + LCDC_PCR);
+#ifndef CONFIG_BACKLIGHT_CLASS_DEVICE
+	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
+#endif
 	writel(fbi->lscr1, fbi->regs + LCDC_LSCR1);
 	writel(fbi->dmacr, fbi->regs + LCDC_DMACR);
 
@@ -847,7 +852,9 @@ static int __init imxfb_probe(struct platform_device *pdev)
 
 	imxfb_enable_controller(fbi);
 	fbi->pdev = pdev;
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
 	imxfb_init_backlight(fbi);
+#endif
 
 	return 0;
 
@@ -885,7 +892,9 @@ static int __devexit imxfb_remove(struct platform_device *pdev)
 
 	imxfb_disable_controller(fbi);
 
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
 	imxfb_exit_backlight(fbi);
+#endif
 	unregister_framebuffer(info);
 
 	pdata = pdev->dev.platform_data;
-- 
1.6.3.3

[PATCH] video/imxfb.c: allow usage without BACKLIGHT_CLASS_DEVICE

[Uwe Kleine-König]

On Thu, Jul 29, 2010 at 10:42:58AM +0200, Eric B?nard wrote:
> Signed-off-by: Eric B?nard <eric@eukrea.com>
> ---
>  drivers/video/imxfb.c |   13 +++++++++++--
>  1 files changed, 11 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
> index 43f0639..0c2fb4d 100644
> --- a/drivers/video/imxfb.c
> +++ b/drivers/video/imxfb.c
> @@ -175,7 +175,9 @@ struct imxfb_info {
>  
>  	struct imx_fb_videomode *mode;
>  	int			num_modes;
> +#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
>  	struct backlight_device *bl;
> +#endif
I'm always unsure about these .._MODULE symbols.  If imxfb and backlight
support both are compiled modular, is backlight support picked up if
#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE is used to guard it?

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[PATCH v2] video/imxfb.c: allow usage without BACKLIGHT_CLASS_DEVICE

[Eric Bénard]

Signed-off-by: Eric B?nard <eric@eukrea.com>
---
v2:	handle CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE

 drivers/video/imxfb.c |   18 ++++++++++++++++--
 1 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 43f0639..a6f0d3f 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -175,7 +175,10 @@ struct imxfb_info {
 
 	struct imx_fb_videomode *mode;
 	int			num_modes;
+#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || \
+	defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE)
 	struct backlight_device *bl;
+#endif
 
 	void (*lcd_power)(int);
 	void (*backlight_power)(int);
@@ -450,8 +453,8 @@ static int imxfb_set_par(struct fb_info *info)
 	return 0;
 }
 
-
-
+#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || \
+	defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE)
 static int imxfb_bl_get_brightness(struct backlight_device *bl)
 {
 	struct imxfb_info *fbi = bl_get_data(bl);
@@ -516,6 +519,7 @@ static void imxfb_exit_backlight(struct imxfb_info *fbi)
 	if (fbi->bl)
 		backlight_device_unregister(fbi->bl);
 }
+#endif
 
 static void imxfb_enable_controller(struct imxfb_info *fbi)
 {
@@ -647,6 +651,10 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
 			fbi->regs + LCDC_SIZE);
 
 	writel(fbi->pcr, fbi->regs + LCDC_PCR);
+#if ! defined(CONFIG_BACKLIGHT_CLASS_DEVICE) && \
+	! defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE)
+	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
+#endif
 	writel(fbi->lscr1, fbi->regs + LCDC_LSCR1);
 	writel(fbi->dmacr, fbi->regs + LCDC_DMACR);
 
@@ -847,7 +855,10 @@ static int __init imxfb_probe(struct platform_device *pdev)
 
 	imxfb_enable_controller(fbi);
 	fbi->pdev = pdev;
+#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || \
+	defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE)
 	imxfb_init_backlight(fbi);
+#endif
 
 	return 0;
 
@@ -885,7 +896,10 @@ static int __devexit imxfb_remove(struct platform_device *pdev)
 
 	imxfb_disable_controller(fbi);
 
+#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || \
+	defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE)
 	imxfb_exit_backlight(fbi);
+#endif
 	unregister_framebuffer(info);
 
 	pdata = pdev->dev.platform_data;
-- 
1.6.3.3

[PATCH v2] video/imxfb.c: allow usage without BACKLIGHT_CLASS_DEVICE

[Uwe Kleine-König]

On Thu, Jul 29, 2010 at 11:47:36AM +0200, Eric B?nard wrote:
> Signed-off-by: Eric B?nard <eric@eukrea.com>
> ---
> v2:	handle CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE
> 
>  drivers/video/imxfb.c |   18 ++++++++++++++++--
>  1 files changed, 16 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
> index 43f0639..a6f0d3f 100644
> --- a/drivers/video/imxfb.c
> +++ b/drivers/video/imxfb.c
> @@ -175,7 +175,10 @@ struct imxfb_info {
>  
>  	struct imx_fb_videomode *mode;
>  	int			num_modes;
> +#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || \
> +	defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE)
>  	struct backlight_device *bl;
> +#endif
I suspect this fails to build with
	CONFIG_BACKLIGHT_CLASS_DEVICE=m 
	CONFIG_FB_IMX=y

Maybe do the following:

#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || \
	(defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) == defined(CONFIG_FB_IMX_MODULE))
#define BACKLIGHT_AVAILABLE
#endif

and use #ifdef BACKLIGHT_AVAILABLE to guard the backlight code?

I didn't test this though.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[PATCH v2] video/imxfb.c: allow usage without BACKLIGHT_CLASS_DEVICE

[Eric Bénard]

Le 29/07/2010 14:45, Uwe Kleine-K?nig a ?crit :
> On Thu, Jul 29, 2010 at 11:47:36AM +0200, Eric B?nard wrote:
>> Signed-off-by: Eric B?nard<eric@eukrea.com>
>> ---
>> v2:	handle CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE
>>
>>   drivers/video/imxfb.c |   18 ++++++++++++++++--
>>   1 files changed, 16 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
>> index 43f0639..a6f0d3f 100644
>> --- a/drivers/video/imxfb.c
>> +++ b/drivers/video/imxfb.c
>> @@ -175,7 +175,10 @@ struct imxfb_info {
>>
>>   	struct imx_fb_videomode *mode;
>>   	int			num_modes;
>> +#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || \
>> +	defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE)
>>   	struct backlight_device *bl;
>> +#endif
> I suspect this fails to build with
> 	CONFIG_BACKLIGHT_CLASS_DEVICE=m
> 	CONFIG_FB_IMX=y
>
you're right, I tested both =y and both =m but not one =y one =m :-(

> Maybe do the following:
>
> #if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || \
> 	(defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) == defined(CONFIG_FB_IMX_MODULE))
> #define BACKLIGHT_AVAILABLE
> #endif
>
> and use #ifdef BACKLIGHT_AVAILABLE to guard the backlight code?
>
> I didn't test this though.
>
patch follows (compile tested with all cases, including this new one ;-).

Eric

[PATCH v3] video/imxfb.c: allow usage without BACKLIGHT_CLASS_DEVICE

[Eric Bénard]

Signed-off-by: Eric B?nard <eric@eukrea.com>
---
v3:	handle CONFIG_BACKLIGHT_CLASS_DEVICE=m & CONFIG_FB_IMX=y case as per
	suggested by Uwe
v2:	handle CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE

 drivers/video/imxfb.c |   19 +++++++++++++++++--
 1 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 43f0639..2f9b7e3 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -40,6 +40,12 @@
  */
 #define DEBUG_VAR 1
 
+#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || \
+	(defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) && \
+		defined(CONFIG_FB_IMX__MODULE))
+#define PWMR_BACKLIGHT_AVAILABLE
+#endif
+
 #define DRIVER_NAME "imx-fb"
 
 #define LCDC_SSA	0x00
@@ -175,7 +181,9 @@ struct imxfb_info {
 
 	struct imx_fb_videomode *mode;
 	int			num_modes;
+#ifdef PWMR_BACKLIGHT_AVAILABLE
 	struct backlight_device *bl;
+#endif
 
 	void (*lcd_power)(int);
 	void (*backlight_power)(int);
@@ -450,8 +458,7 @@ static int imxfb_set_par(struct fb_info *info)
 	return 0;
 }
 
-
-
+#ifdef PWMR_BACKLIGHT_AVAILABLE
 static int imxfb_bl_get_brightness(struct backlight_device *bl)
 {
 	struct imxfb_info *fbi = bl_get_data(bl);
@@ -516,6 +523,7 @@ static void imxfb_exit_backlight(struct imxfb_info *fbi)
 	if (fbi->bl)
 		backlight_device_unregister(fbi->bl);
 }
+#endif
 
 static void imxfb_enable_controller(struct imxfb_info *fbi)
 {
@@ -647,6 +655,9 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
 			fbi->regs + LCDC_SIZE);
 
 	writel(fbi->pcr, fbi->regs + LCDC_PCR);
+#ifndef PWMR_BACKLIGHT_AVAILABLE
+	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
+#endif
 	writel(fbi->lscr1, fbi->regs + LCDC_LSCR1);
 	writel(fbi->dmacr, fbi->regs + LCDC_DMACR);
 
@@ -847,7 +858,9 @@ static int __init imxfb_probe(struct platform_device *pdev)
 
 	imxfb_enable_controller(fbi);
 	fbi->pdev = pdev;
+#ifdef PWMR_BACKLIGHT_AVAILABLE
 	imxfb_init_backlight(fbi);
+#endif
 
 	return 0;
 
@@ -885,7 +898,9 @@ static int __devexit imxfb_remove(struct platform_device *pdev)
 
 	imxfb_disable_controller(fbi);
 
+#ifdef PWMR_BACKLIGHT_AVAILABLE
 	imxfb_exit_backlight(fbi);
+#endif
 	unregister_framebuffer(info);
 
 	pdata = pdev->dev.platform_data;
-- 
1.6.3.3

[PATCH v3] video/imxfb.c: allow usage without BACKLIGHT_CLASS_DEVICE

[Sergei Shtylyov]

Hello.

Eric B?nard wrote:

> Signed-off-by: Eric B?nard <eric@eukrea.com>
[...]
> diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
> index 43f0639..2f9b7e3 100644
> --- a/drivers/video/imxfb.c
> +++ b/drivers/video/imxfb.c
> @@ -40,6 +40,12 @@
>   */
>  #define DEBUG_VAR 1
>  
> +#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || \
> +	(defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) && \
> +		defined(CONFIG_FB_IMX__MODULE))

    Are you sure there should be two underscores before MODULE?

WBR, Sergei

[PATCH v3] video/imxfb.c: allow usage without BACKLIGHT_CLASS_DEVICE

[Eric Bénard]

Hi,

Le 29/07/2010 15:23, Sergei Shtylyov a ?crit :
>> +#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || \
>> + (defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) && \
>> + defined(CONFIG_FB_IMX__MODULE))
>
> Are you sure there should be two underscores before MODULE?
>
no ... that was only compile tested as you can see :-(
Thanks and sorry for the noise for such a stupid patch !

Eric

[PATCH v4] video/imxfb.c: allow usage without BACKLIGHT_CLASS_DEVICE

[Eric Bénard]

Signed-off-by: Eric B?nard <eric@eukrea.com>
---
v4:	fix typo in CONFIG_FB_IMX_MODULE
v3:	handle CONFIG_BACKLIGHT_CLASS_DEVICE=m & CONFIG_FB_IMX=y case as per
	suggested by Uwe
v2:	handle CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE

 drivers/video/imxfb.c |   19 +++++++++++++++++--
 1 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 43f0639..5c363d0 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -40,6 +40,12 @@
  */
 #define DEBUG_VAR 1
 
+#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || \
+	(defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) && \
+		defined(CONFIG_FB_IMX_MODULE))
+#define PWMR_BACKLIGHT_AVAILABLE
+#endif
+
 #define DRIVER_NAME "imx-fb"
 
 #define LCDC_SSA	0x00
@@ -175,7 +181,9 @@ struct imxfb_info {
 
 	struct imx_fb_videomode *mode;
 	int			num_modes;
+#ifdef PWMR_BACKLIGHT_AVAILABLE
 	struct backlight_device *bl;
+#endif
 
 	void (*lcd_power)(int);
 	void (*backlight_power)(int);
@@ -450,8 +458,7 @@ static int imxfb_set_par(struct fb_info *info)
 	return 0;
 }
 
-
-
+#ifdef PWMR_BACKLIGHT_AVAILABLE
 static int imxfb_bl_get_brightness(struct backlight_device *bl)
 {
 	struct imxfb_info *fbi = bl_get_data(bl);
@@ -516,6 +523,7 @@ static void imxfb_exit_backlight(struct imxfb_info *fbi)
 	if (fbi->bl)
 		backlight_device_unregister(fbi->bl);
 }
+#endif
 
 static void imxfb_enable_controller(struct imxfb_info *fbi)
 {
@@ -647,6 +655,9 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
 			fbi->regs + LCDC_SIZE);
 
 	writel(fbi->pcr, fbi->regs + LCDC_PCR);
+#ifndef PWMR_BACKLIGHT_AVAILABLE
+	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
+#endif
 	writel(fbi->lscr1, fbi->regs + LCDC_LSCR1);
 	writel(fbi->dmacr, fbi->regs + LCDC_DMACR);
 
@@ -847,7 +858,9 @@ static int __init imxfb_probe(struct platform_device *pdev)
 
 	imxfb_enable_controller(fbi);
 	fbi->pdev = pdev;
+#ifdef PWMR_BACKLIGHT_AVAILABLE
 	imxfb_init_backlight(fbi);
+#endif
 
 	return 0;
 
@@ -885,7 +898,9 @@ static int __devexit imxfb_remove(struct platform_device *pdev)
 
 	imxfb_disable_controller(fbi);
 
+#ifdef PWMR_BACKLIGHT_AVAILABLE
 	imxfb_exit_backlight(fbi);
+#endif
 	unregister_framebuffer(info);
 
 	pdata = pdev->dev.platform_data;
-- 
1.6.3.3

[PATCH v4] video/imxfb.c: allow usage without BACKLIGHT_CLASS_DEVICE

[Uwe Kleine-König]

Hello,


On Thu, Jul 29, 2010 at 04:17:34PM +0200, Eric B?nard wrote:
> Signed-off-by: Eric B?nard <eric@eukrea.com>
> ---
> v4:	fix typo in CONFIG_FB_IMX_MODULE
> v3:	handle CONFIG_BACKLIGHT_CLASS_DEVICE=m & CONFIG_FB_IMX=y case as per
> 	suggested by Uwe
> v2:	handle CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE
looks ok to me now (though I didn't compile test).
(i.e. something like:
Reported-and-Acked-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
)

Sascha, can you please take this.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[PATCH] video/imxfb.c: allow usage without BACKLIGHT_CLASS_DEVICE

[Uwe Kleine-König]

From: Eric B?nard <eric@eukrea.com>

This fixes the following build failure:

	drivers/built-in.o: In function `imxfb_probe': mxcmmc.c:(.init.text+0xd04): undefined reference to `backlight_device_register'
	drivers/built-in.o: In function `imxfb_remove': mxcmmc.c:(.devexit.text+0x44): undefined reference to `backlight_device_unregister'

that was introduced by

	7a2bb23 (imxfb: add pwmr controlled backlight support)

Signed-off-by: Eric B?nard <eric@eukrea.com>
Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
KernelVersion: v2.6.35-rc1-118-g7a2bb23

 drivers/video/imxfb.c |   19 +++++++++++++++++--
 1 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 43f0639..5c363d0 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -40,6 +40,12 @@
  */
 #define DEBUG_VAR 1
 
+#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || \
+	(defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) && \
+		defined(CONFIG_FB_IMX_MODULE))
+#define PWMR_BACKLIGHT_AVAILABLE
+#endif
+
 #define DRIVER_NAME "imx-fb"
 
 #define LCDC_SSA	0x00
@@ -175,7 +181,9 @@ struct imxfb_info {
 
 	struct imx_fb_videomode *mode;
 	int			num_modes;
+#ifdef PWMR_BACKLIGHT_AVAILABLE
 	struct backlight_device *bl;
+#endif
 
 	void (*lcd_power)(int);
 	void (*backlight_power)(int);
@@ -450,8 +458,7 @@ static int imxfb_set_par(struct fb_info *info)
 	return 0;
 }
 
-
-
+#ifdef PWMR_BACKLIGHT_AVAILABLE
 static int imxfb_bl_get_brightness(struct backlight_device *bl)
 {
 	struct imxfb_info *fbi = bl_get_data(bl);
@@ -516,6 +523,7 @@ static void imxfb_exit_backlight(struct imxfb_info *fbi)
 	if (fbi->bl)
 		backlight_device_unregister(fbi->bl);
 }
+#endif
 
 static void imxfb_enable_controller(struct imxfb_info *fbi)
 {
@@ -647,6 +655,9 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
 			fbi->regs + LCDC_SIZE);
 
 	writel(fbi->pcr, fbi->regs + LCDC_PCR);
+#ifndef PWMR_BACKLIGHT_AVAILABLE
+	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
+#endif
 	writel(fbi->lscr1, fbi->regs + LCDC_LSCR1);
 	writel(fbi->dmacr, fbi->regs + LCDC_DMACR);
 
@@ -847,7 +858,9 @@ static int __init imxfb_probe(struct platform_device *pdev)
 
 	imxfb_enable_controller(fbi);
 	fbi->pdev = pdev;
+#ifdef PWMR_BACKLIGHT_AVAILABLE
 	imxfb_init_backlight(fbi);
+#endif
 
 	return 0;
 
@@ -885,7 +898,9 @@ static int __devexit imxfb_remove(struct platform_device *pdev)
 
 	imxfb_disable_controller(fbi);
 
+#ifdef PWMR_BACKLIGHT_AVAILABLE
 	imxfb_exit_backlight(fbi);
+#endif
 	unregister_framebuffer(info);
 
 	pdata = pdev->dev.platform_data;
-- 
1.7.1

[PATCH v3] video/imxfb.c: allow usage without BACKLIGHT_CLASS_DEVICE

[Lothar Waßmann]

Eric B?nard writes:
> Signed-off-by: Eric B?nard <eric@eukrea.com>
> ---
> v3:	handle CONFIG_BACKLIGHT_CLASS_DEVICE=m & CONFIG_FB_IMX=y case as per
> 	suggested by Uwe
> v2:	handle CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE
> 
>  drivers/video/imxfb.c |   19 +++++++++++++++++--
>  1 files changed, 17 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
> index 43f0639..2f9b7e3 100644
> --- a/drivers/video/imxfb.c
> +++ b/drivers/video/imxfb.c
> @@ -40,6 +40,12 @@
>   */
>  #define DEBUG_VAR 1
>  
> +#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || \
> +	(defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) && \
> +		defined(CONFIG_FB_IMX__MODULE))
                                     ^^
should be just one '_'.


Lothar Wa?mann
-- 
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstra?e 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Gesch?ftsf?hrer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info at karo-electronics.de
___________________________________________________________

[PATCH 3/3] imxfb: add pwmr controlled backlight support

[Eric Bénard]

Hi Uwe,

Le 29/07/2010 07:16, Uwe Kleine-K?nig a ?crit :
>> Signed-off-by: Eric B?nard<eric@eukrea.com>
>> ---
>> v2 : updated to use backlight infrastructure
> this should have a dependency on CONFIG_BACKLIGHT_CLASS_DEVICE.  As
> Sascha already took your patch you can just try to build mx27_defconfig
> on his for-rmk branch :-|
>
> Instead of a dependency I would prefer to have imxfb usable without
> CONFIG_BACKLIGHT_CLASS_DEVICE.  From a quick look there are drivers that
> have that.  (I checked drivers/video/sa1100fb.c +
> drivers/video/backlight/locomolcd.c.)
>
I've just sent a patch which fixes this build failure with mx27_defconfig.
When CONFIG_BACKLIGHT_CLASS_DEVICE is not selected, the driver is now as 
it was before my patch.

I'll try to put the backligh things in a driver into backlight directory 
when I find time, which will remove the #ifdef

Also, I confirm the patch you sent for 
arch/arm/plat-mxc/include/mach/gpio.h is necessary to compile a kernel 
using mx27_defconfig .

Thanks,
Eric

[PATCH 1/3] eukrea_mbimxsd: factorize motherboard support

[Uwe Kleine-König]

Hiho,

On Fri, Jul 16, 2010 at 03:09:05PM +0200, Eric B?nard wrote:
> This motherboard is used for both an i.MX25 and an i.MX35 machines
> so we can have only one file to support it in plat-mxc.

"This fixes the warning ..." please

> Signed-off-by: Eric B?nard <eric@eukrea.com>
> ---
> v2 : rebased against last imx-for-2.6.36 branch
> 
>  arch/arm/mach-mx25/Kconfig                         |   14 -
>  arch/arm/mach-mx25/Makefile                        |    1 -
>  arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c      |  261 --------------------
>  arch/arm/mach-mx25/mach-cpuimx25.c                 |    2 +-
>  arch/arm/mach-mx3/Kconfig                          |   14 -
>  arch/arm/mach-mx3/Makefile                         |    1 -
>  arch/arm/mach-mx3/mach-cpuimx35.c                  |    2 +-
>  arch/arm/plat-mxc/Kconfig                          |    8 +
>  arch/arm/plat-mxc/Makefile                         |    1 +
>  .../eukrea_mbimxsd-baseboard.c                     |  184 +++++++++++---
>  .../plat-mxc/include/mach/board-eukrea_cpuimx35.h  |   40 ---
>  ...d-eukrea_cpuimx25.h => board-eukrea_cpuimxsd.h} |   10 +-
>  12 files changed, 163 insertions(+), 375 deletions(-)
>  delete mode 100644 arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
>  rename arch/arm/{mach-mx3 => plat-mxc}/eukrea_mbimxsd-baseboard.c (69%)
>  delete mode 100644 arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx35.h
>  rename arch/arm/plat-mxc/include/mach/{board-eukrea_cpuimx25.h => board-eukrea_cpuimxsd.h} (83%)
> 
> diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
> index 67e0b54..5f72318 100644
> --- a/arch/arm/mach-mx25/Kconfig
> +++ b/arch/arm/mach-mx25/Kconfig
> @@ -14,18 +14,4 @@ config MACH_EUKREA_CPUIMX25
>  	select IMX_HAVE_PLATFORM_MXC_NAND
>  	select MXC_ULPI if USB_ULPI
>  
> -choice
> -	prompt "Baseboard"
> -	depends on MACH_EUKREA_CPUIMX25
> -	default MACH_EUKREA_MBIMXSD_BASEBOARD
> -
> -config MACH_EUKREA_MBIMXSD_BASEBOARD
> -	prompt "Eukrea MBIMXSD development board"
> -	bool
> -	help
> -	  This adds board specific devices that can be found on Eukrea's
> -	  MBIMXSD evaluation board.
> -
> -endchoice
> -
>  endif
> diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
> index 87ffb9c..6ba07b6 100644
> --- a/arch/arm/mach-mx25/Makefile
> +++ b/arch/arm/mach-mx25/Makefile
> @@ -2,4 +2,3 @@ obj-y				:= mm.o devices.o
>  obj-$(CONFIG_ARCH_MX25)		+= clock.o
>  obj-$(CONFIG_MACH_MX25_3DS)	+= mach-mx25_3ds.o
>  obj-$(CONFIG_MACH_EUKREA_CPUIMX25)		+= mach-cpuimx25.o
> -obj-$(CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD)	+= eukrea_mbimxsd-baseboard.o
> diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
> deleted file mode 100644
> index f07b1f9..0000000
> --- a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
> +++ /dev/null
> @@ -1,261 +0,0 @@
> -/*
> - * Copyright (C) 2010 Eric Benard - eric at eukrea.com
> - *
> - * Based on pcm970-baseboard.c which is :
> - * Copyright (C) 2008 Juergen Beisert (kernel at pengutronix.de)
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License
> - * as published by the Free Software Foundation; either version 2
> - * of the License, or (at your option) any later version.
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> - * MA 02110-1301, USA.
> - */
> -
> -#include <linux/gpio.h>
> -#include <linux/leds.h>
> -#include <linux/platform_device.h>
> -#include <linux/gpio_keys.h>
> -#include <linux/input.h>
> -#include <video/platform_lcd.h>
> -
> -#include <mach/board-eukrea_cpuimx25.h>
> -#include <mach/hardware.h>
> -#include <mach/iomux-mx25.h>
> -#include <mach/common.h>
> -#include <asm/mach-types.h>
> -#include <asm/mach/arch.h>
> -#include <mach/mx25.h>
> -#include <mach/imx-uart.h>
> -#include <mach/imxfb.h>
> -#include <mach/ssi.h>
> -#include <mach/audmux.h>
> -
> -#include "devices-imx25.h"
> -#include "devices.h"
> -
> -static struct pad_desc eukrea_mbimxsd_pads[] = {
> -	/* LCD */
> -	MX25_PAD_LD0__LD0,
> -	MX25_PAD_LD1__LD1,
> -	MX25_PAD_LD2__LD2,
> -	MX25_PAD_LD3__LD3,
> -	MX25_PAD_LD4__LD4,
> -	MX25_PAD_LD5__LD5,
> -	MX25_PAD_LD6__LD6,
> -	MX25_PAD_LD7__LD7,
> -	MX25_PAD_LD8__LD8,
> -	MX25_PAD_LD9__LD9,
> -	MX25_PAD_LD10__LD10,
> -	MX25_PAD_LD11__LD11,
> -	MX25_PAD_LD12__LD12,
> -	MX25_PAD_LD13__LD13,
> -	MX25_PAD_LD14__LD14,
> -	MX25_PAD_LD15__LD15,
> -	MX25_PAD_GPIO_E__LD16,
> -	MX25_PAD_GPIO_F__LD17,
> -	MX25_PAD_HSYNC__HSYNC,
> -	MX25_PAD_VSYNC__VSYNC,
> -	MX25_PAD_LSCLK__LSCLK,
> -	MX25_PAD_OE_ACD__OE_ACD,
> -	MX25_PAD_CONTRAST__CONTRAST,
> -	/* LCD_PWR */
> -	MX25_PAD_PWM__GPIO_1_26,
> -	/* LED */
> -	MX25_PAD_POWER_FAIL__GPIO_3_19,
> -	/* SWITCH */
> -	MX25_PAD_VSTBY_ACK__GPIO_3_18,
> -	/* UART2 */
> -	MX25_PAD_UART2_RTS__UART2_RTS,
> -	MX25_PAD_UART2_CTS__UART2_CTS,
> -	MX25_PAD_UART2_TXD__UART2_TXD,
> -	MX25_PAD_UART2_RXD__UART2_RXD,
> -	/* SD1 */
> -	MX25_PAD_SD1_CMD__SD1_CMD,
> -	MX25_PAD_SD1_CLK__SD1_CLK,
> -	MX25_PAD_SD1_DATA0__SD1_DATA0,
> -	MX25_PAD_SD1_DATA1__SD1_DATA1,
> -	MX25_PAD_SD1_DATA2__SD1_DATA2,
> -	MX25_PAD_SD1_DATA3__SD1_DATA3,
> -	/* SD1 CD */
> -	MX25_PAD_DE_B__GPIO_2_20,
> -	/* I2S */
> -	MX25_PAD_KPP_COL3__AUD5_TXFS,
> -	MX25_PAD_KPP_COL2__AUD5_TXC,
> -	MX25_PAD_KPP_COL1__AUD5_RXD,
> -	MX25_PAD_KPP_COL0__AUD5_TXD,
> -};
> -
> -#define GPIO_LED1	83
> -#define GPIO_SWITCH1	82
> -#define GPIO_SD1CD	52
> -#define GPIO_LCDPWR	26
> -
> -static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
> -	{
> -		.mode	= {
> -			.name		= "CMO-QVGA",
> -			.refresh	= 60,
> -			.xres		= 320,
> -			.yres		= 240,
> -			.pixclock	= KHZ2PICOS(6500),
> -			.left_margin	= 30,
> -			.right_margin	= 38,
> -			.upper_margin	= 20,
> -			.lower_margin	= 3,
> -			.hsync_len	= 15,
> -			.vsync_len	= 4,
> -		},
> -		.bpp	= 16,
> -		.pcr	= 0xCAD08B80,
> -	},
> -};
> -
> -static struct imx_fb_platform_data eukrea_mximxsd_fb_pdata = {
> -	.mode		= eukrea_mximxsd_modes,
> -	.num_modes	= ARRAY_SIZE(eukrea_mximxsd_modes),
> -	.pwmr		= 0x00A903FF,
> -	.lscr1		= 0x00120300,
> -	.dmacr		= 0x00040060,
> -};
> -
> -static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
> -				   unsigned int power)
> -{
> -	if (power)
> -		gpio_direction_output(GPIO_LCDPWR, 1);
> -	else
> -		gpio_direction_output(GPIO_LCDPWR, 0);
> -}
> -
> -static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
> -	.set_power		= eukrea_mbimxsd_lcd_power_set,
> -};
> -
> -static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
> -	.name			= "platform-lcd",
> -	.dev.platform_data	= &eukrea_mbimxsd_lcd_power_data,
> -};
> -
> -static struct gpio_led eukrea_mbimxsd_leds[] = {
> -	{
> -		.name			= "led1",
> -		.default_trigger	= "heartbeat",
> -		.active_low		= 1,
> -		.gpio			= GPIO_LED1,
> -	},
> -};
> -
> -static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
> -	.leds		= eukrea_mbimxsd_leds,
> -	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
> -};
> -
> -static struct platform_device eukrea_mbimxsd_leds_gpio = {
> -	.name	= "leds-gpio",
> -	.id	= -1,
> -	.dev	= {
> -		.platform_data	= &eukrea_mbimxsd_led_info,
> -	},
> -};
> -
> -static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
> -	{
> -		.gpio		= GPIO_SWITCH1,
> -		.code		= BTN_0,
> -		.desc		= "BP1",
> -		.active_low	= 1,
> -		.wakeup		= 1,
> -	},
> -};
> -
> -static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
> -	.buttons	= eukrea_mbimxsd_gpio_buttons,
> -	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
> -};
> -
> -static struct platform_device eukrea_mbimxsd_button_device = {
> -	.name		= "gpio-keys",
> -	.id		= -1,
> -	.num_resources	= 0,
> -	.dev		= {
> -		.platform_data	= &eukrea_mbimxsd_button_data,
> -	}
> -};
> -
> -static struct platform_device *platform_devices[] __initdata = {
> -	&eukrea_mbimxsd_leds_gpio,
> -	&eukrea_mbimxsd_button_device,
> -	&eukrea_mbimxsd_lcd_powerdev,
> -};
> -
> -static const struct imxuart_platform_data uart_pdata __initconst = {
> -	.flags = IMXUART_HAVE_RTSCTS,
> -};
> -
> -static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
> -	{
> -		I2C_BOARD_INFO("tlv320aic23", 0x1a),
> -	},
> -};
> -
> -struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
> -	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
> -};
> -
> -/*
> - * system init for baseboard usage. Will be called by cpuimx25 init.
> - *
> - * Add platform devices present on this baseboard and init
> - * them from CPU side as far as required to use them later on
> - */
> -void __init eukrea_mbimxsd_baseboard_init(void)
> -{
> -	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
> -			ARRAY_SIZE(eukrea_mbimxsd_pads)))
> -		printk(KERN_ERR "error setting mbimxsd pads !\n");
> -
> -#if defined(CONFIG_SND_SOC_EUKREA_TLV320)
> -	/* SSI unit master I2S codec connected to SSI_AUD5*/
> -	mxc_audmux_v2_configure_port(0,
> -			MXC_AUDMUX_V2_PTCR_SYN |
> -			MXC_AUDMUX_V2_PTCR_TFSDIR |
> -			MXC_AUDMUX_V2_PTCR_TFSEL(4) |
> -			MXC_AUDMUX_V2_PTCR_TCLKDIR |
> -			MXC_AUDMUX_V2_PTCR_TCSEL(4),
> -			MXC_AUDMUX_V2_PDCR_RXDSEL(4)
> -	);
> -	mxc_audmux_v2_configure_port(4,
> -			MXC_AUDMUX_V2_PTCR_SYN,
> -			MXC_AUDMUX_V2_PDCR_RXDSEL(0)
> -	);
> -#endif
> -
> -	imx25_add_imx_uart1(&uart_pdata);
> -	mxc_register_device(&mx25_fb_device, &eukrea_mximxsd_fb_pdata);
> -	mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata);
> -
> -	gpio_request(GPIO_LED1, "LED1");
> -	gpio_direction_output(GPIO_LED1, 1);
> -	gpio_free(GPIO_LED1);
> -
> -	gpio_request(GPIO_SWITCH1, "SWITCH1");
> -	gpio_direction_input(GPIO_SWITCH1);
> -	gpio_free(GPIO_SWITCH1);
> -
> -	gpio_request(GPIO_LCDPWR, "LCDPWR");
> -	gpio_direction_output(GPIO_LCDPWR, 1);
> -	gpio_free(GPIO_SWITCH1);
> -
> -	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
> -				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
> -
> -	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
> -}
> diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c
> index d39f9cc..526928f 100644
> --- a/arch/arm/mach-mx25/mach-cpuimx25.c
> +++ b/arch/arm/mach-mx25/mach-cpuimx25.c
> @@ -29,7 +29,7 @@
>  #include <linux/usb/ulpi.h>
>  #include <linux/fsl_devices.h>
>  
> -#include <mach/board-eukrea_cpuimx25.h>
> +#include <mach/board-eukrea_cpuimxsd.h>
>  #include <mach/hardware.h>
>  #include <asm/mach-types.h>
>  #include <asm/mach/arch.h>
> diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
> index e063657..68b841e 100644
> --- a/arch/arm/mach-mx3/Kconfig
> +++ b/arch/arm/mach-mx3/Kconfig
> @@ -163,18 +163,4 @@ config MACH_EUKREA_CPUIMX35
>  	  Include support for Eukrea CPUIMX35 platform. This includes
>  	  specific configurations for the board and its peripherals.
>  
> -choice
> -	prompt "Baseboard"
> -	depends on MACH_EUKREA_CPUIMX35
> -	default MACH_EUKREA_MBIMXSD_BASEBOARD
> -
> -config MACH_EUKREA_MBIMXSD_BASEBOARD
> -	prompt "Eukrea MBIMXSD development board"
> -	bool
> -	help
> -	  This adds board specific devices that can be found on Eukrea's
> -	  MBIMXSD evaluation board.
> -
> -endchoice
> -
>  endif
> diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
> index 54bc935..28fa1f2 100644
> --- a/arch/arm/mach-mx3/Makefile
> +++ b/arch/arm/mach-mx3/Makefile
> @@ -25,4 +25,3 @@ obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
>  obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35_3ds.o
>  obj-$(CONFIG_MACH_KZM_ARM11_01)	+= mach-kzm_arm11_01.o
>  obj-$(CONFIG_MACH_EUKREA_CPUIMX35)	+= mach-cpuimx35.o
> -obj-$(CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD)	+= eukrea_mbimxsd-baseboard.o
> diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
> index 4f6146d..a7ecd7b 100644
> --- a/arch/arm/mach-mx3/mach-cpuimx35.c
> +++ b/arch/arm/mach-mx3/mach-cpuimx35.c
> @@ -37,7 +37,7 @@
>  #include <asm/mach/time.h>
>  #include <asm/mach/map.h>
>  
> -#include <mach/board-eukrea_cpuimx35.h>
> +#include <mach/board-eukrea_cpuimxsd.h>
>  #include <mach/hardware.h>
>  #include <mach/common.h>
>  #include <mach/iomux-mx35.h>
> diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
> index 0527e65..26708b0 100644
> --- a/arch/arm/plat-mxc/Kconfig
> +++ b/arch/arm/plat-mxc/Kconfig
> @@ -91,6 +91,14 @@ config MXC_DEBUG_BOARD
>  	  data/address de-multiplexing and decode, signal level shift,
>  	  interrupt control and various board functions.
>  
> +config MACH_EUKREA_MBIMXSD_BASEBOARD
> +	prompt "Eukrea MBIMXSD development board"
> +	depends on MACH_EUKREA_CPUIMX25 || MACH_EUKREA_CPUIMX35
> +	bool
> +	help
> +	  This adds board specific devices that can be found on Eukrea's
> +	  MBIMXSD evaluation board.
> +
>  config MXC_ULPI
>  	bool
>  
> diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
> index 78d405e..2d31132 100644
> --- a/arch/arm/plat-mxc/Makefile
> +++ b/arch/arm/plat-mxc/Makefile
> @@ -16,6 +16,7 @@ obj-$(CONFIG_MXC_ULPI) += ulpi.o
>  obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
>  obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
>  obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
> +obj-$(CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD)	+= eukrea_mbimxsd-baseboard.o
>  ifdef CONFIG_SND_IMX_SOC
>  obj-y += ssi-fiq.o
>  obj-y += ssi-fiq-ksym.o
> diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/plat-mxc/eukrea_mbimxsd-baseboard.c
> similarity index 69%
> rename from arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
> rename to arch/arm/plat-mxc/eukrea_mbimxsd-baseboard.c
> index 368a603..57e8e7b 100644
> --- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
> +++ b/arch/arm/plat-mxc/eukrea_mbimxsd-baseboard.c
> @@ -36,49 +36,119 @@
>  #include <asm/mach/time.h>
>  #include <asm/mach/map.h>
>  
> -#include <mach/board-eukrea_cpuimx35.h>
>  #include <mach/hardware.h>
>  #include <mach/common.h>
> -#include <mach/imx-uart.h>
> +#include <mach/board-eukrea_cpuimxsd.h>
> +
> +#if defined(CONFIG_MACH_EUKREA_CPUIMX25)
> +#include <mach/iomux-mx25.h>
> +#include <mach/mx25.h>
> +#include <mach/imxfb.h>
> +#include "../mach-mx25/devices-imx25.h"
> +#include "../mach-mx25/devices.h"
> +#endif
> +
> +#if defined(CONFIG_MACH_EUKREA_CPUIMX35)
>  #include <mach/iomux-mx35.h>
>  #include <mach/ipu.h>
>  #include <mach/mx3fb.h>
> -#include <mach/audmux.h>
> +#include "../mach-mx3/devices-imx35.h"
> +#include "../mach-mx3/devices.h"
> +#endif
> +
> +#include <mach/imx-uart.h>
>  #include <mach/ssi.h>
> +#include <mach/audmux.h>
>  
> -#include "devices-imx35.h"
> -#include "devices.h"
> +#if defined(CONFIG_MACH_EUKREA_CPUIMX25)
> +static struct pad_desc eukrea_mbimxsd_pads[] = {
> +	/* LCD */
> +	MX25_PAD_LD0__LD0,
> +	MX25_PAD_LD1__LD1,
> +	MX25_PAD_LD2__LD2,
> +	MX25_PAD_LD3__LD3,
> +	MX25_PAD_LD4__LD4,
> +	MX25_PAD_LD5__LD5,
> +	MX25_PAD_LD6__LD6,
> +	MX25_PAD_LD7__LD7,
> +	MX25_PAD_LD8__LD8,
> +	MX25_PAD_LD9__LD9,
> +	MX25_PAD_LD10__LD10,
> +	MX25_PAD_LD11__LD11,
> +	MX25_PAD_LD12__LD12,
> +	MX25_PAD_LD13__LD13,
> +	MX25_PAD_LD14__LD14,
> +	MX25_PAD_LD15__LD15,
> +	MX25_PAD_GPIO_E__LD16,
> +	MX25_PAD_GPIO_F__LD17,
> +	MX25_PAD_HSYNC__HSYNC,
> +	MX25_PAD_VSYNC__VSYNC,
> +	MX25_PAD_LSCLK__LSCLK,
> +	MX25_PAD_OE_ACD__OE_ACD,
> +	MX25_PAD_CONTRAST__CONTRAST,
> +	/* LCD_PWR */
> +	MX25_PAD_PWM__GPIO_1_26,
> +	/* LED */
> +	MX25_PAD_POWER_FAIL__GPIO_3_19,
> +	/* SWITCH */
> +	MX25_PAD_VSTBY_ACK__GPIO_3_18,
> +	/* UART2 */
> +	MX25_PAD_UART2_RTS__UART2_RTS,
> +	MX25_PAD_UART2_CTS__UART2_CTS,
> +	MX25_PAD_UART2_TXD__UART2_TXD,
> +	MX25_PAD_UART2_RXD__UART2_RXD,
> +	/* SD1 */
> +	MX25_PAD_SD1_CMD__SD1_CMD,
> +	MX25_PAD_SD1_CLK__SD1_CLK,
> +	MX25_PAD_SD1_DATA0__SD1_DATA0,
> +	MX25_PAD_SD1_DATA1__SD1_DATA1,
> +	MX25_PAD_SD1_DATA2__SD1_DATA2,
> +	MX25_PAD_SD1_DATA3__SD1_DATA3,
> +	/* SD1 CD */
> +	MX25_PAD_DE_B__GPIO_2_20,
> +	/* I2S */
> +	MX25_PAD_KPP_COL3__AUD5_TXFS,
> +	MX25_PAD_KPP_COL2__AUD5_TXC,
> +	MX25_PAD_KPP_COL1__AUD5_RXD,
> +	MX25_PAD_KPP_COL0__AUD5_TXD,
> +};
>  
> -static const struct fb_videomode fb_modedb[] = {
> +#define GPIO_LED1	83
> +#define GPIO_SWITCH1	82
> +#define GPIO_SD1CD	52
> +#define GPIO_LCDPWR	26
> +#define SSI_PORT	4
> +
> +static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
>  	{
> -		.name		= "CMO_QVGA",
> -		.refresh	= 60,
> -		.xres		= 320,
> -		.yres		= 240,
> -		.pixclock	= KHZ2PICOS(6500),
> -		.left_margin	= 68,
> -		.right_margin	= 20,
> -		.upper_margin	= 15,
> -		.lower_margin	= 4,
> -		.hsync_len	= 30,
> -		.vsync_len	= 3,
> -		.sync		= 0,
> -		.vmode		= FB_VMODE_NONINTERLACED,
> -		.flag		= 0,
> +		.mode	= {
> +			.name		= "CMO-QVGA",
> +			.refresh	= 60,
> +			.xres		= 320,
> +			.yres		= 240,
> +			.pixclock	= KHZ2PICOS(6500),
> +			.left_margin	= 30,
> +			.right_margin	= 38,
> +			.upper_margin	= 20,
> +			.lower_margin	= 3,
> +			.hsync_len	= 15,
> +			.vsync_len	= 4,
> +		},
> +		.bpp	= 16,
> +		.pcr	= 0xCAD08B80,
>  	},
>  };
>  
> -static struct ipu_platform_data mx3_ipu_data = {
> -	.irq_base = MXC_IPU_IRQ_START,
> -};
> -
> -static struct mx3fb_platform_data mx3fb_pdata = {
> -	.dma_dev	= &mx3_ipu.dev,
> -	.name		= "CMO_QVGA",
> -	.mode		= fb_modedb,
> -	.num_modes	= ARRAY_SIZE(fb_modedb),
> +static struct imx_fb_platform_data eukrea_mximxsd_fb_pdata = {
> +	.mode		= eukrea_mximxsd_modes,
> +	.num_modes	= ARRAY_SIZE(eukrea_mximxsd_modes),
> +	.pwmr		= 0x00A903FF,
> +	.lscr1		= 0x00120300,
> +	.dmacr		= 0x00040060,
>  };
> +#endif
>  
> +#if defined(CONFIG_MACH_EUKREA_CPUIMX35)
>  static struct pad_desc eukrea_mbimxsd_pads[] = {
>  	/* LCD */
>  	MX35_PAD_LD0__IPU_DISPB_DAT_0,
> @@ -126,6 +196,38 @@ static struct pad_desc eukrea_mbimxsd_pads[] = {
>  #define GPIO_LED1	(2 * 32 + 29)
>  #define GPIO_SWITCH1	(2 * 32 + 25)
>  #define GPIO_LCDPWR	(4)
> +#define SSI_PORT	(3)
> +
> +static const struct fb_videomode fb_modedb[] = {
> +	{
> +		.name		= "CMO_QVGA",
> +		.refresh	= 60,
> +		.xres		= 320,
> +		.yres		= 240,
> +		.pixclock	= KHZ2PICOS(6500),
> +		.left_margin	= 68,
> +		.right_margin	= 20,
> +		.upper_margin	= 15,
> +		.lower_margin	= 4,
> +		.hsync_len	= 30,
> +		.vsync_len	= 3,
> +		.sync		= 0,
> +		.vmode		= FB_VMODE_NONINTERLACED,
> +		.flag		= 0,
> +	},
> +};
> +
> +static struct ipu_platform_data mx3_ipu_data = {
> +	.irq_base = MXC_IPU_IRQ_START,
> +};
> +
> +static struct mx3fb_platform_data mx3fb_pdata = {
> +	.dma_dev	= &mx3_ipu.dev,
> +	.name		= "CMO_QVGA",
> +	.mode		= fb_modedb,
> +	.num_modes	= ARRAY_SIZE(fb_modedb),
> +};
> +#endif
>  
>  static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
>  				   unsigned int power)
> @@ -207,12 +309,14 @@ static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
>  	},
>  };
>  
> +#if defined(CONFIG_SND_SOC_EUKREA_TLV320)
>  struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
>  	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
>  };
> +#endif
>  
>  /*
> - * system init for baseboard usage. Will be called by cpuimx35 init.
> + * system init for baseboard usage. Will be called by cpuimxX5 init.
>   *
>   * Add platform devices present on this baseboard and init
>   * them from CPU side as far as required to use them later on
> @@ -224,26 +328,32 @@ void __init eukrea_mbimxsd_baseboard_init(void)
>  		printk(KERN_ERR "error setting mbimxsd pads !\n");
>  
>  #if defined(CONFIG_SND_SOC_EUKREA_TLV320)
> -	/* SSI unit master I2S codec connected to SSI_AUD4 */
> +	/* SSI unit master I2S codec connected to SSI_AUD */
>  	mxc_audmux_v2_configure_port(0,
>  			MXC_AUDMUX_V2_PTCR_SYN |
>  			MXC_AUDMUX_V2_PTCR_TFSDIR |
> -			MXC_AUDMUX_V2_PTCR_TFSEL(3) |
> +			MXC_AUDMUX_V2_PTCR_TFSEL(SSI_PORT) |
>  			MXC_AUDMUX_V2_PTCR_TCLKDIR |
> -			MXC_AUDMUX_V2_PTCR_TCSEL(3),
> -			MXC_AUDMUX_V2_PDCR_RXDSEL(3)
> +			MXC_AUDMUX_V2_PTCR_TCSEL(SSI_PORT),
> +			MXC_AUDMUX_V2_PDCR_RXDSEL(SSI_PORT)
>  	);
> -	mxc_audmux_v2_configure_port(3,
> +	mxc_audmux_v2_configure_port(SSI_PORT,
>  			MXC_AUDMUX_V2_PTCR_SYN,
>  			MXC_AUDMUX_V2_PDCR_RXDSEL(0)
>  	);
> +	mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata);
>  #endif
>  
> +#if defined(CONFIG_MACH_EUKREA_CPUIMX25)
> +	imx25_add_imx_uart1(&uart_pdata);
> +	mxc_register_device(&mx25_fb_device, &eukrea_mximxsd_fb_pdata);
> +#endif
> +
> +#if defined(CONFIG_MACH_EUKREA_CPUIMX35)
>  	imx35_add_imx_uart1(&uart_pdata);
>  	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
>  	mxc_register_device(&mx3_fb, &mx3fb_pdata);
> -
> -	mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata);
> +#endif
>  
>  	gpio_request(GPIO_LED1, "LED1");
>  	gpio_direction_output(GPIO_LED1, 1);
> diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx35.h b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx35.h
> deleted file mode 100644
> index 116eee7..0000000
> --- a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx35.h
> +++ /dev/null
> @@ -1,40 +0,0 @@
> -/*
> - * Copyright (C) 2010 Eric Benard - eric at eukrea.com
> - *
> - * Based on board-pcm038.h which is :
> - * Copyright (C) 2008 Juergen Beisert (kernel at pengutronix.de)
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License
> - * as published by the Free Software Foundation; either version 2
> - * of the License, or (at your option) any later version.
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> - * MA 02110-1301, USA.
> - */
> -
> -#ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX35_H__
> -#define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX35_H__
> -
> -#ifndef __ASSEMBLY__
> -/*
> - * This CPU module needs a baseboard to work. After basic initializing
> - * its own devices, it calls baseboard's init function.
> - * TODO: Add your own baseboard init function and call it from
> - * inside eukrea_cpuimx25_init().
> - *
> - * This example here is for the development board. Refer
> - * eukrea_mbimx25-baseboard.c
> - */
> -
> -extern void eukrea_mbimxsd_baseboard_init(void);
> -
> -#endif
> -
> -#endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX35_H__ */
> diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx25.h b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimxsd.h
> similarity index 83%
> rename from arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx25.h
> rename to arch/arm/plat-mxc/include/mach/board-eukrea_cpuimxsd.h
> index 5c9901e..96789b1 100644
> --- a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx25.h
> +++ b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimxsd.h
> @@ -19,22 +19,22 @@
>   * MA 02110-1301, USA.
>   */
>  
> -#ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX25_H__
> -#define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX25_H__
> +#ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMXSD_H__
#ifndef __MACH_BOARD_EUKREA_CPUIMXSD_H__ please

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[PATCH] video/imxfb.c: allow usage without BACKLIGHT_CLASS_DEVICE

[Eric Bénard]

Signed-off-by: Eric B?nard <eric@eukrea.com>
---
 drivers/video/imxfb.c |   13 +++++++++++--
 1 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 43f0639..0c2fb4d 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -175,7 +175,9 @@ struct imxfb_info {
 
 	struct imx_fb_videomode *mode;
 	int			num_modes;
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
 	struct backlight_device *bl;
+#endif
 
 	void (*lcd_power)(int);
 	void (*backlight_power)(int);
@@ -450,8 +452,7 @@ static int imxfb_set_par(struct fb_info *info)
 	return 0;
 }
 
-
-
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
 static int imxfb_bl_get_brightness(struct backlight_device *bl)
 {
 	struct imxfb_info *fbi = bl_get_data(bl);
@@ -516,6 +517,7 @@ static void imxfb_exit_backlight(struct imxfb_info *fbi)
 	if (fbi->bl)
 		backlight_device_unregister(fbi->bl);
 }
+#endif
 
 static void imxfb_enable_controller(struct imxfb_info *fbi)
 {
@@ -647,6 +649,9 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
 			fbi->regs + LCDC_SIZE);
 
 	writel(fbi->pcr, fbi->regs + LCDC_PCR);
+#ifndef CONFIG_BACKLIGHT_CLASS_DEVICE
+	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
+#endif
 	writel(fbi->lscr1, fbi->regs + LCDC_LSCR1);
 	writel(fbi->dmacr, fbi->regs + LCDC_DMACR);
 
@@ -847,7 +852,9 @@ static int __init imxfb_probe(struct platform_device *pdev)
 
 	imxfb_enable_controller(fbi);
 	fbi->pdev = pdev;
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
 	imxfb_init_backlight(fbi);
+#endif
 
 	return 0;
 
@@ -885,7 +892,9 @@ static int __devexit imxfb_remove(struct platform_device *pdev)
 
 	imxfb_disable_controller(fbi);
 
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
 	imxfb_exit_backlight(fbi);
+#endif
 	unregister_framebuffer(info);
 
 	pdata = pdev->dev.platform_data;
-- 
1.6.3.3