From: eric@eukrea.com (Eric Bénard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] eukrea-baseboards: fix the merge in one file
Date: Fri, 30 Jul 2010 22:58:40 +0200 [thread overview]
Message-ID: <1280523520-17236-1-git-send-email-eric@eukrea.com> (raw)
Last change I did made a big mess in function names and CONFIG names,
this patch fixes this so that the baseboard support is really built
when selected.
Signed-off-by: Eric B?nard <eric@eukrea.com>
---
arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c | 2 +-
arch/arm/mach-mx25/mach-cpuimx25.c | 4 ++--
arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c | 2 +-
arch/arm/mach-mx3/mach-cpuimx35.c | 4 ++--
arch/arm/plat-mxc/include/mach/eukrea-baseboards.h | 4 ++--
5 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
index 91931dc..4aaadc7 100644
--- a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
@@ -215,7 +215,7 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
* Add platform devices present on this baseboard and init
* them from CPU side as far as required to use them later on
*/
-void __init eukrea_mbimxsd_baseboard_init(void)
+void __init eukrea_mbimxsd25_baseboard_init(void)
{
if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
ARRAY_SIZE(eukrea_mbimxsd_pads)))
diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c
index 56b2e26..b5efee2 100644
--- a/arch/arm/mach-mx25/mach-cpuimx25.c
+++ b/arch/arm/mach-mx25/mach-cpuimx25.c
@@ -147,8 +147,8 @@ static void __init eukrea_cpuimx25_init(void)
if (!otg_mode_host)
mxc_register_device(&otg_udc_device, &otg_device_pdata);
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD
- eukrea_mbimxsd_baseboard_init();
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
+ eukrea_mbimxsd25_baseboard_init();
#endif
}
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index 1dc5004..f8f15e3 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -216,7 +216,7 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
* Add platform devices present on this baseboard and init
* them from CPU side as far as required to use them later on
*/
-void __init eukrea_mbimxsd_baseboard_init(void)
+void __init eukrea_mbimxsd35_baseboard_init(void)
{
if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
ARRAY_SIZE(eukrea_mbimxsd_pads)))
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index 63f970f..e4268bb 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -201,8 +201,8 @@ static void __init mxc_board_init(void)
if (!otg_mode_host)
mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD
- eukrea_mbimxsd_baseboard_init();
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD
+ eukrea_mbimxsd35_baseboard_init();
#endif
}
diff --git a/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
index 634e3f4..656acb4 100644
--- a/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
+++ b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
@@ -37,9 +37,9 @@
* mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51
*/
-extern void eukrea_mbimx25_baseboard_init(void);
+extern void eukrea_mbimxsd25_baseboard_init(void);
extern void eukrea_mbimx27_baseboard_init(void);
-extern void eukrea_mbimx35_baseboard_init(void);
+extern void eukrea_mbimxsd35_baseboard_init(void);
extern void eukrea_mbimx51_baseboard_init(void);
#endif
--
1.6.3.3
reply other threads:[~2010-07-30 20:58 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1280523520-17236-1-git-send-email-eric@eukrea.com \
--to=eric@eukrea.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).