From mboxrd@z Thu Jan 1 00:00:00 1970 From: m.szyprowski@samsung.com (Marek Szyprowski) Date: Wed, 11 Aug 2010 14:03:51 +0200 Subject: [PATCH 2/9] ARM: S5PV210: add initial device-table In-Reply-To: <1281528238-7298-1-git-send-email-m.szyprowski@samsung.com> References: <1281528238-7298-1-git-send-email-m.szyprowski@samsung.com> Message-ID: <1281528238-7298-3-git-send-email-m.szyprowski@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Define the initial device-table for S5PV210 SoCs. Contains only definitions for UART devices. Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park --- arch/arm/mach-s5pv210/Makefile | 1 + arch/arm/mach-s5pv210/cpu.c | 1 + arch/arm/mach-s5pv210/dev-table.c | 71 ++++++++++++++++++++++++++++++ arch/arm/plat-s5p/include/plat/s5pv210.h | 1 + 4 files changed, 74 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-s5pv210/dev-table.c diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 05048c5..6f7c13b 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -14,6 +14,7 @@ obj- := obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o gpiolib.o obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o +obj-$(CONFIG_CPU_S5PV210) += dev-table.o # machine support diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index c7e0b8a..785f011 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -87,6 +87,7 @@ static void s5pv210_sw_reset(void) void __init s5pv210_map_io(void) { iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc)); + s5pv210_register_devtable(); /* initialise device information early */ s5pv210_default_sdhci0(); diff --git a/arch/arm/mach-s5pv210/dev-table.c b/arch/arm/mach-s5pv210/dev-table.c new file mode 100644 index 0000000..396c4a7 --- /dev/null +++ b/arch/arm/mach-s5pv210/dev-table.c @@ -0,0 +1,71 @@ +/* linux/arch/arm/mach-s5pv210/dev-table.c + * + * Copyright 2010 Ben Dooks + * + * S5PV210 series device creation code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +/* note, table is not ordered */ + +struct s3c_pdev_table s5pv210_dev_table[] __initdata = { + { + .type = SAMSUNG_DEVICE_UART, + .name = "s5pv210-uart", + .index = 0, + .res = { + S5P_PA_UART0, + IRQ_S5P_UART_RX0, IRQ_S5P_UART_TX0, IRQ_S5P_UART_ERR0, + }, + }, { + .type = SAMSUNG_DEVICE_UART, + .name = "s5pv210-uart", + .index = 1, + .res = { + S5P_PA_UART1, + IRQ_S5P_UART_RX1, IRQ_S5P_UART_TX1, IRQ_S5P_UART_ERR1, + }, + }, { + .type = SAMSUNG_DEVICE_UART, + .name = "s5pv210-uart", + .index = 2, + .res = { + S5P_PA_UART2, + IRQ_S5P_UART_RX2, IRQ_S5P_UART_TX2, IRQ_S5P_UART_ERR2, + }, + }, { + .type = SAMSUNG_DEVICE_UART, + .name = "s5pv210-uart", + .index = 3, + .res = { + S5P_PA_UART3, + IRQ_S5P_UART_RX3, IRQ_S5P_UART_TX3, IRQ_S5P_UART_ERR3, + }, + }, +}; + +void __init s5pv210_register_devtable(void) +{ + s3c_device_register_table(s5pv210_dev_table, + ARRAY_SIZE(s5pv210_dev_table)); +} diff --git a/arch/arm/plat-s5p/include/plat/s5pv210.h b/arch/arm/plat-s5p/include/plat/s5pv210.h index 6c93a0c..49dac0b 100644 --- a/arch/arm/plat-s5p/include/plat/s5pv210.h +++ b/arch/arm/plat-s5p/include/plat/s5pv210.h @@ -15,6 +15,7 @@ extern void s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s5pv210_register_clocks(void); extern void s5pv210_setup_clocks(void); +extern void s5pv210_register_devtable(void); #ifdef CONFIG_CPU_S5PV210 -- 1.7.1.569.g6f426