From: marek.vasut@gmail.com (Marek Vasut)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 04/13] UCB1400: Pass ucb1400-gpio data through ac97 bus
Date: Fri, 13 Aug 2010 06:32:35 +0200 [thread overview]
Message-ID: <1281673964-2119-4-git-send-email-marek.vasut@gmail.com> (raw)
In-Reply-To: <1281673964-2119-1-git-send-email-marek.vasut@gmail.com>
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
drivers/gpio/ucb1400_gpio.c | 19 ++++++-------------
drivers/mfd/ucb1400_core.c | 5 +++++
include/linux/ucb1400.h | 19 ++++++-------------
3 files changed, 17 insertions(+), 26 deletions(-)
diff --git a/drivers/gpio/ucb1400_gpio.c b/drivers/gpio/ucb1400_gpio.c
index 50e6bd1..fba45a5 100644
--- a/drivers/gpio/ucb1400_gpio.c
+++ b/drivers/gpio/ucb1400_gpio.c
@@ -12,8 +12,6 @@
#include <linux/module.h>
#include <linux/ucb1400.h>
-struct ucb1400_gpio_data *ucbdata;
-
static int ucb1400_gpio_dir_in(struct gpio_chip *gc, unsigned off)
{
struct ucb1400_gpio *gpio;
@@ -50,7 +48,7 @@ static int ucb1400_gpio_probe(struct platform_device *dev)
struct ucb1400_gpio *ucb = dev->dev.platform_data;
int err = 0;
- if (!(ucbdata && ucbdata->gpio_offset)) {
+ if (!(ucb && ucb->gpio_offset)) {
err = -EINVAL;
goto err;
}
@@ -58,7 +56,7 @@ static int ucb1400_gpio_probe(struct platform_device *dev)
platform_set_drvdata(dev, ucb);
ucb->gc.label = "ucb1400_gpio";
- ucb->gc.base = ucbdata->gpio_offset;
+ ucb->gc.base = ucb->gpio_offset;
ucb->gc.ngpio = 10;
ucb->gc.owner = THIS_MODULE;
@@ -72,8 +70,8 @@ static int ucb1400_gpio_probe(struct platform_device *dev)
if (err)
goto err;
- if (ucbdata && ucbdata->gpio_setup)
- err = ucbdata->gpio_setup(&dev->dev, ucb->gc.ngpio);
+ if (ucb && ucb->gpio_setup)
+ err = ucb->gpio_setup(&dev->dev, ucb->gc.ngpio);
err:
return err;
@@ -85,8 +83,8 @@ static int ucb1400_gpio_remove(struct platform_device *dev)
int err = 0;
struct ucb1400_gpio *ucb = platform_get_drvdata(dev);
- if (ucbdata && ucbdata->gpio_teardown) {
- err = ucbdata->gpio_teardown(&dev->dev, ucb->gc.ngpio);
+ if (ucb && ucb->gpio_teardown) {
+ err = ucb->gpio_teardown(&dev->dev, ucb->gc.ngpio);
if (err)
return err;
}
@@ -113,11 +111,6 @@ static void __exit ucb1400_gpio_exit(void)
platform_driver_unregister(&ucb1400_gpio_driver);
}
-void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data)
-{
- ucbdata = data;
-}
-
module_init(ucb1400_gpio_init);
module_exit(ucb1400_gpio_exit);
diff --git a/drivers/mfd/ucb1400_core.c b/drivers/mfd/ucb1400_core.c
index dbe2801..3e24632 100644
--- a/drivers/mfd/ucb1400_core.c
+++ b/drivers/mfd/ucb1400_core.c
@@ -75,6 +75,11 @@ static int ucb1400_core_probe(struct device *dev)
/* GPIO */
ucb_gpio.ac97 = ac97;
+ if (pdata) {
+ ucb_gpio.gpio_setup = pdata->gpio_setup;
+ ucb_gpio.gpio_teardown = pdata->gpio_teardown;
+ ucb_gpio.gpio_offset = pdata->gpio_offset;
+ }
ucb->ucb1400_gpio = platform_device_alloc("ucb1400_gpio", -1);
if (!ucb->ucb1400_gpio) {
err = -ENOMEM;
diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h
index 1b47909..1a6bfdd 100644
--- a/include/linux/ucb1400.h
+++ b/include/linux/ucb1400.h
@@ -83,15 +83,12 @@
#define UCB_ID 0x7e
#define UCB_ID_1400 0x4304
-struct ucb1400_gpio_data {
- int gpio_offset;
- int (*gpio_setup)(struct device *dev, int ngpio);
- int (*gpio_teardown)(struct device *dev, int ngpio);
-};
-
struct ucb1400_gpio {
struct gpio_chip gc;
struct snd_ac97 *ac97;
+ int gpio_offset;
+ int (*gpio_setup)(struct device *dev, int ngpio);
+ int (*gpio_teardown)(struct device *dev, int ngpio);
};
struct ucb1400_ts {
@@ -112,6 +109,9 @@ struct ucb1400 {
struct ucb1400_pdata {
int irq;
+ int gpio_offset;
+ int (*gpio_setup)(struct device *dev, int ngpio);
+ int (*gpio_teardown)(struct device *dev, int ngpio);
};
static inline u16 ucb1400_reg_read(struct snd_ac97 *ac97, u16 reg)
@@ -163,11 +163,4 @@ static inline void ucb1400_adc_disable(struct snd_ac97 *ac97)
unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel,
int adcsync);
-
-#ifdef CONFIG_GPIO_UCB1400
-void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data);
-#else
-static inline void ucb1400_gpio_set_data(struct ucb1400_gpio_data *data) {}
-#endif
-
#endif
--
1.7.1
next prev parent reply other threads:[~2010-08-13 4:32 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-13 4:32 [PATCH 01/13] Balloon3: Disperse MFP config Marek Vasut
2010-08-13 4:32 ` [PATCH 02/13] PXA: Vpac270: Fix gpio_power for MMC Marek Vasut
2010-08-13 4:32 ` [PATCH 03/13] PXA: PalmTC: Modularize Palm Tungsten|C Marek Vasut
2010-08-13 4:32 ` Marek Vasut [this message]
2010-08-13 4:32 ` [PATCH 05/13] PXA: Vpac270: Correct touch IRQ passing to UCB1400 Marek Vasut
2010-08-13 4:32 ` [PATCH 06/13] PXA: PalmTC: Pass GPIO offset to ucb1400-gpio Marek Vasut
2010-08-13 4:32 ` [PATCH 07/13] PXA: PalmTC: Add gpio-leds and vibrator support Marek Vasut
2010-08-13 4:32 ` [PATCH 08/13] PXA: Colibri: Toradex Colibri PXA270 CF support Marek Vasut
2010-08-18 11:43 ` Daniel Mack
2010-08-21 6:22 ` Marek Vasut
2010-08-21 9:33 ` Daniel Mack
2010-09-01 7:23 ` Russell King - ARM Linux
2010-09-01 12:39 ` Marek Vasut
2010-08-13 4:32 ` [PATCH 09/13] PXA: Colibri: Push evalboard MFP into module files Marek Vasut
2010-08-13 4:32 ` [PATCH 10/13] PXA: Colibri: Add M41T00 RTC support Marek Vasut
2010-08-13 4:32 ` [PATCH 11/13] PXA: Colibri: Rename Colibri-evalboard Marek Vasut
2010-08-13 4:32 ` [PATCH 12/13] pxa2xx/pcmcia: Prepare for pxa320 Marek Vasut
2010-08-13 4:32 ` [PATCH 13/13] PXA: Colibri PXA320 PCMCIA driver Marek Vasut
2010-08-18 4:11 ` [PATCH 01/13] Balloon3: Disperse MFP config Eric Miao
2010-08-18 5:05 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1281673964-2119-4-git-send-email-marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).