From: johlstei@codeaurora.org (Jeff Ohlstein)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 01/24] msm: create config option for proc-comm
Date: Tue, 24 Aug 2010 21:57:30 -0700 [thread overview]
Message-ID: <1282712273-344-2-git-send-email-johlstei@codeaurora.org> (raw)
In-Reply-To: <1282712273-344-1-git-send-email-johlstei@codeaurora.org>
From: Steve Muckle <smuckle@codeaurora.org>
Some builds may not support the proc-comm interface with
the baseband processor.
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
---
arch/arm/mach-msm/Kconfig | 7 +++++++
arch/arm/mach-msm/Makefile | 6 ++----
2 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 4e79580..08ed76c 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -10,6 +10,7 @@ config ARCH_MSM7X00A
select MSM_SMD
select MSM_SMD_PKG3
select CPU_V6
+ select MSM_PROC_COMM
config ARCH_MSM7X30
bool "MSM7x30"
@@ -18,6 +19,7 @@ config ARCH_MSM7X30
select MSM_VIC
select CPU_V7
select MSM_REMOTE_SPINLOCK_DEKKERS
+ select MSM_PROC_COMM
config ARCH_QSD8X50
bool "QSD8X50"
@@ -26,6 +28,8 @@ config ARCH_QSD8X50
select MSM_VIC
select CPU_V7
select MSM_REMOTE_SPINLOCK_LDREX
+ select MSM_PROC_COMM
+
endchoice
config MSM_SOC_REV_A
@@ -103,6 +107,9 @@ endchoice
config MSM_SMD_PKG3
bool
+config MSM_PROC_COMM
+ bool
+
config MSM_SMD
bool
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index faeb1f9..78fb536 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -1,8 +1,5 @@
-obj-y += proc_comm.o
obj-y += io.o idle.o timer.o dma.o
-obj-y += vreg.o
obj-y += acpuclock-arm11.o
-obj-y += clock.o clock-pcom.o
ifdef CONFIG_MSM_VIC
obj-y += irq-vic.o
@@ -10,10 +7,11 @@ else
obj-y += irq.o
endif
+obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o
+obj-$(CONFIG_MSM_PROC_COMM) += clock.o gpio.o
obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
obj-$(CONFIG_MSM_SMD) += last_radio_log.o
-
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
--
1.7.2.1
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
next prev parent reply other threads:[~2010-08-25 4:57 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-25 4:57 [PATCH 00/24] Support for Qualcomm msm8660 target Jeff Ohlstein
2010-08-25 4:57 ` Jeff Ohlstein [this message]
2010-08-25 4:57 ` [PATCH 02/24] arm: Kconfig option for ARCH_MSM_SCORPIONMP Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 03/24] arm: mm: add proc info for ScorpionMP Jeff Ohlstein
2010-08-27 13:54 ` Catalin Marinas
2010-08-27 15:29 ` Daniel Walker
2010-08-27 16:04 ` Catalin Marinas
2010-08-27 16:33 ` Daniel Walker
2010-08-27 16:49 ` Catalin Marinas
2010-08-27 19:53 ` Daniel Walker
2010-08-31 12:18 ` Catalin Marinas
2010-08-31 16:44 ` Daniel Walker
2010-09-01 5:56 ` Shilimkar, Santosh
2010-09-04 14:32 ` Russell King - ARM Linux
2010-09-06 22:22 ` Daniel Walker
2010-09-04 14:31 ` Russell King - ARM Linux
2010-08-25 4:57 ` [PATCH 04/24] GIC: Dont disable INT in ack callback Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 05/24] msm: io: MSM8X60 io support Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 06/24] msm: initial irq definitions for MSM8X60 Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 07/24] msm: irqs-8x60: interrupt map Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 08/24] msm: timer: support 8x60 timers Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 09/24] msm: MSM8X60 RUMI3 board support Jeff Ohlstein
2010-09-02 11:08 ` Russell King - ARM Linux
2010-09-09 3:15 ` Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 10/24] msm: irq: rename existing entry-macro to entry-macro-vic Jeff Ohlstein
2010-09-02 11:10 ` Russell King - ARM Linux
2010-08-25 4:57 ` [PATCH 11/24] msm: 8x60: gic initialization fixup for RUMI Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 12/24] msm: clock: add dummy clock driver Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 13/24] dma: add stub functions for dma features not yet present on 8x60 Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 14/24] msm: add hotplug stub functions Jeff Ohlstein
2010-09-02 11:11 ` Russell King - ARM Linux
2010-09-02 16:49 ` Daniel Walker
2010-09-02 17:12 ` Russell King - ARM Linux
2010-09-02 22:25 ` Daniel Walker
2010-09-02 22:36 ` Daniel Walker
2010-09-03 7:31 ` Russell King - ARM Linux
2010-09-03 16:23 ` Daniel Walker
2010-08-25 4:57 ` [PATCH 15/24] msm: allow uart to be conditionally disabled Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 16/24] msm: add build support for msm8x60 target Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 17/24] msm: 8x60: setup correct handlers for private interrupts Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 18/24] msm: physical offset for MSM8X60 Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 19/24] msm: add msm8x60_surf machine Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 20/24] msm: MSM8X60 simulator board support Jeff Ohlstein
2010-09-02 11:13 ` Russell King - ARM Linux
2010-09-02 18:19 ` David Brown
2010-09-02 18:52 ` Russell King - ARM Linux
2010-08-25 4:57 ` [PATCH 21/24] msm: add MSM8x60 FFA support Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 22/24] msm: Add MSM IOMMU support Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 23/24] msm: Platform initialization for the IOMMU driver Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 24/24] msm: Platform data for msm8x60 IOMMUs Jeff Ohlstein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1282712273-344-2-git-send-email-johlstei@codeaurora.org \
--to=johlstei@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).