From: johlstei@codeaurora.org (Jeff Ohlstein)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 20/24] msm: MSM8X60 simulator board support
Date: Tue, 24 Aug 2010 21:57:49 -0700 [thread overview]
Message-ID: <1282712273-344-21-git-send-email-johlstei@codeaurora.org> (raw)
In-Reply-To: <1282712273-344-1-git-send-email-johlstei@codeaurora.org>
From: Steve Muckle <smuckle@codeaurora.org>
Board configuration for MSM8X60 simulation.
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
---
arch/arm/mach-msm/Kconfig | 7 +++++++
arch/arm/mach-msm/Makefile | 1 +
arch/arm/mach-msm/board-msm8x60.c | 10 +++++++++-
3 files changed, 17 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 3017e12..d2610a3 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -105,6 +105,13 @@ config MACH_MSM8X60_SURF
help
Support for the Qualcomm MSM8x60 SURF eval board.
+config MACH_MSM8X60_SIM
+ depends on ARCH_MSM8X60
+ default n
+ bool "MSM8x60 Simulator"
+ help
+ Support for the Qualcomm MSM8x60 simulator.
+
endmenu
config MSM_DEBUG_UART
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 1d62025..9fb73ab 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -29,3 +29,4 @@ obj-$(CONFIG_ARCH_MSM8X60) += gpiomux-8x60.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_MACH_MSM8X60_RUMI3) += board-msm8x60.o
obj-$(CONFIG_MACH_MSM8X60_SURF) += board-msm8x60.o
+obj-$(CONFIG_MACH_MSM8X60_SIM) += board-msm8x60.o
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index fd953c2..7a2ed7f 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -56,7 +56,8 @@ static void __init msm8x60_init_irq(void)
/* RUMI does not adhere to GIC spec by enabling STIs by default.
* Enable/clear is supposed to be RO for STIs, but is RW on RUMI.
*/
- writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
+ if (!machine_is_msm8x60_sim())
+ writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
/* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet
* as they are configured as level, which does not play nice with
@@ -85,3 +86,10 @@ MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
.init_machine = msm8x60_init,
.timer = &msm_timer,
MACHINE_END
+
+MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
+ .map_io = msm8x60_map_io,
+ .init_irq = msm8x60_init_irq,
+ .init_machine = msm8x60_init,
+ .timer = &msm_timer,
+MACHINE_END
--
1.7.2.1
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
next prev parent reply other threads:[~2010-08-25 4:57 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-25 4:57 [PATCH 00/24] Support for Qualcomm msm8660 target Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 01/24] msm: create config option for proc-comm Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 02/24] arm: Kconfig option for ARCH_MSM_SCORPIONMP Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 03/24] arm: mm: add proc info for ScorpionMP Jeff Ohlstein
2010-08-27 13:54 ` Catalin Marinas
2010-08-27 15:29 ` Daniel Walker
2010-08-27 16:04 ` Catalin Marinas
2010-08-27 16:33 ` Daniel Walker
2010-08-27 16:49 ` Catalin Marinas
2010-08-27 19:53 ` Daniel Walker
2010-08-31 12:18 ` Catalin Marinas
2010-08-31 16:44 ` Daniel Walker
2010-09-01 5:56 ` Shilimkar, Santosh
2010-09-04 14:32 ` Russell King - ARM Linux
2010-09-06 22:22 ` Daniel Walker
2010-09-04 14:31 ` Russell King - ARM Linux
2010-08-25 4:57 ` [PATCH 04/24] GIC: Dont disable INT in ack callback Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 05/24] msm: io: MSM8X60 io support Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 06/24] msm: initial irq definitions for MSM8X60 Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 07/24] msm: irqs-8x60: interrupt map Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 08/24] msm: timer: support 8x60 timers Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 09/24] msm: MSM8X60 RUMI3 board support Jeff Ohlstein
2010-09-02 11:08 ` Russell King - ARM Linux
2010-09-09 3:15 ` Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 10/24] msm: irq: rename existing entry-macro to entry-macro-vic Jeff Ohlstein
2010-09-02 11:10 ` Russell King - ARM Linux
2010-08-25 4:57 ` [PATCH 11/24] msm: 8x60: gic initialization fixup for RUMI Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 12/24] msm: clock: add dummy clock driver Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 13/24] dma: add stub functions for dma features not yet present on 8x60 Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 14/24] msm: add hotplug stub functions Jeff Ohlstein
2010-09-02 11:11 ` Russell King - ARM Linux
2010-09-02 16:49 ` Daniel Walker
2010-09-02 17:12 ` Russell King - ARM Linux
2010-09-02 22:25 ` Daniel Walker
2010-09-02 22:36 ` Daniel Walker
2010-09-03 7:31 ` Russell King - ARM Linux
2010-09-03 16:23 ` Daniel Walker
2010-08-25 4:57 ` [PATCH 15/24] msm: allow uart to be conditionally disabled Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 16/24] msm: add build support for msm8x60 target Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 17/24] msm: 8x60: setup correct handlers for private interrupts Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 18/24] msm: physical offset for MSM8X60 Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 19/24] msm: add msm8x60_surf machine Jeff Ohlstein
2010-08-25 4:57 ` Jeff Ohlstein [this message]
2010-09-02 11:13 ` [PATCH 20/24] msm: MSM8X60 simulator board support Russell King - ARM Linux
2010-09-02 18:19 ` David Brown
2010-09-02 18:52 ` Russell King - ARM Linux
2010-08-25 4:57 ` [PATCH 21/24] msm: add MSM8x60 FFA support Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 22/24] msm: Add MSM IOMMU support Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 23/24] msm: Platform initialization for the IOMMU driver Jeff Ohlstein
2010-08-25 4:57 ` [PATCH 24/24] msm: Platform data for msm8x60 IOMMUs Jeff Ohlstein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1282712273-344-21-git-send-email-johlstei@codeaurora.org \
--to=johlstei@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).