From: mark.brown314@gmail.com (Mark F. Brown)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/2] pxa168: added initial support for TPO TD043MTEA1 LCD display on Aspenite
Date: Wed, 25 Aug 2010 23:51:55 -0400 [thread overview]
Message-ID: <1282794715-28640-3-git-send-email-mark.brown314@gmail.com> (raw)
In-Reply-To: <1282794715-28640-1-git-send-email-mark.brown314@gmail.com>
Signed-off-by: Mark F. Brown <mark.brown314@gmail.com>
---
arch/arm/mach-mmp/aspenite.c | 60 ++++++++++++++++++++++++++++++++++++++++++
1 files changed, 60 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 0629394..9e1bd6b 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -23,6 +23,7 @@
#include <mach/mfp-pxa168.h>
#include <mach/pxa168.h>
#include <mach/gpio.h>
+#include <video/pxa168fb.h>
#include "common.h"
@@ -66,6 +67,36 @@ static unsigned long common_pin_config[] __initdata = {
GPIO115_I2S_BCLK,
GPIO116_I2S_RXD,
GPIO117_I2S_TXD,
+
+ /* LCD */
+ GPIO56_LCD_FCLK_RD,
+ GPIO57_LCD_LCLK_A0,
+ GPIO58_LCD_PCLK_WR,
+ GPIO59_LCD_DENA_BIAS,
+ GPIO60_LCD_DD0,
+ GPIO61_LCD_DD1,
+ GPIO62_LCD_DD2,
+ GPIO63_LCD_DD3,
+ GPIO64_LCD_DD4,
+ GPIO65_LCD_DD5,
+ GPIO66_LCD_DD6,
+ GPIO67_LCD_DD7,
+ GPIO68_LCD_DD8,
+ GPIO69_LCD_DD9,
+ GPIO70_LCD_DD10,
+ GPIO71_LCD_DD11,
+ GPIO72_LCD_DD12,
+ GPIO73_LCD_DD13,
+ GPIO74_LCD_DD14,
+ GPIO75_LCD_DD15,
+ GPIO76_LCD_DD16,
+ GPIO77_LCD_DD17,
+ GPIO78_LCD_DD18,
+ GPIO79_LCD_DD19,
+ GPIO80_LCD_DD20,
+ GPIO81_LCD_DD21,
+ GPIO82_LCD_DD22,
+ GPIO83_LCD_DD23,
};
static struct smc91x_platdata smc91x_info = {
@@ -134,6 +165,34 @@ static struct i2c_board_info aspenite_i2c_info[] __initdata = {
{ I2C_BOARD_INFO("wm8753", 0x1b), },
};
+static struct fb_videomode video_modes[] = {
+ [0] = {
+ .pixclock = 30120,
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .hsync_len = 1,
+ .left_margin = 215,
+ .right_margin = 40,
+ .vsync_len = 1,
+ .upper_margin = 34,
+ .lower_margin = 10,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
+ },
+};
+
+struct pxa168fb_mach_info aspenite_lcd_info = {
+ .id = "Graphic Frame",
+ .modes = video_modes,
+ .num_modes = ARRAY_SIZE(video_modes),
+ .pix_fmt = PIX_FMT_RGB565,
+ .io_pin_allocation_mode = PIN_MODE_DUMB_24,
+ .dumb_mode = DUMB_MODE_RGB888,
+ .active = 1,
+ .panel_rbswap = 0,
+ .invert_pixclock = 0,
+};
+
static void __init common_init(void)
{
mfp_config(ARRAY_AND_SIZE(common_pin_config));
@@ -143,6 +202,7 @@ static void __init common_init(void)
pxa168_add_twsi(1, NULL, ARRAY_AND_SIZE(aspenite_i2c_info));
pxa168_add_ssp(1);
pxa168_add_nand(&aspenite_nand_info);
+ pxa168_add_fb(&aspenite_lcd_info);
/* off-chip devices */
platform_device_register(&smc91x_device);
--
1.7.0.4
next prev parent reply other threads:[~2010-08-26 3:51 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-26 3:51 [PATCH v3 0/2] added initial support for TPO TD043MTEA1 LCD display on Aspenite Mark F. Brown
2010-08-26 3:51 ` [PATCH v3 1/2] pxa168: added framebuffer support code Mark F. Brown
2010-08-26 9:34 ` Eric Miao
2010-08-26 3:51 ` Mark F. Brown [this message]
2010-08-26 9:29 ` [PATCH v3 2/2] pxa168: added initial support for TPO TD043MTEA1 LCD display on Aspenite Eric Miao
2010-08-26 4:51 ` [PATCH v3 0/2] " Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1282794715-28640-3-git-send-email-mark.brown314@gmail.com \
--to=mark.brown314@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).