From: vince@kyllikki.org (Vincent Sanders)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/9] Remove unused default configuration
Date: Mon, 13 Sep 2010 16:13:45 +0100 [thread overview]
Message-ID: <1284390832-7181-3-git-send-email-vince@kyllikki.org> (raw)
In-Reply-To: <1284390832-7181-1-git-send-email-vince@kyllikki.org>
From: Vincent Sanders <vince@simtec.co.uk>
The mx1 default configuration has not built throughout the 2.6.36
series (since 2.6.35-git1). The link has failed with
fs/built-in.o: In function `nfs_callback_authenticate':
compr_zlib.c:(.text+0x7c12c): undefined reference to `svc_gss_principal'
This configuration appers to be unused by the maintainer so remove it.
Signed-off-by: Vincent Sanders <vince@kyllikki.org>
---
arch/arm/configs/mx1_defconfig | 90 ----------------------------------------
1 files changed, 0 insertions(+), 90 deletions(-)
delete mode 100644 arch/arm/configs/mx1_defconfig
diff --git a/arch/arm/configs/mx1_defconfig b/arch/arm/configs/mx1_defconfig
deleted file mode 100644
index 2f38d97..0000000
--- a/arch/arm/configs/mx1_defconfig
+++ /dev/null
@@ -1,90 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX1=y
-CONFIG_ARCH_MX1ADS=y
-CONFIG_MACH_SCB9328=y
-CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_W1=y
-CONFIG_W1_MASTER_MXC=y
-CONFIG_W1_SLAVE_THERM=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_IMX=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_MXC=y
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
--
1.7.0.4
next prev parent reply other threads:[~2010-09-13 15:13 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-13 15:13 Remove unused default configurations Vincent Sanders
2010-09-13 15:13 ` [PATCH 1/9] Remove unused default configuration Vincent Sanders
2010-09-13 15:13 ` Vincent Sanders [this message]
2010-09-14 14:05 ` [PATCH 2/9] " Uwe Kleine-König
2010-09-13 15:13 ` [PATCH 3/9] " Vincent Sanders
2010-09-13 15:13 ` [PATCH 4/9] Remove unused n8x0 " Vincent Sanders
2010-09-13 15:13 ` [PATCH 5/9] Remove unused omap generic 2420 " Vincent Sanders
2010-09-13 15:13 ` [PATCH 6/9] Remove unused pxa3xx " Vincent Sanders
2010-09-14 6:15 ` Haojian Zhuang
2010-09-14 6:51 ` Eric Miao
2010-09-13 15:13 ` [PATCH 7/9] Remove unused qil-a9260 " Vincent Sanders
2010-09-13 15:13 ` [PATCH 8/9] Remove unused usb-a9260 " Vincent Sanders
2010-09-13 15:13 ` [PATCH 9/9] Remove unused usb-a9263 " Vincent Sanders
2010-09-13 15:27 ` Jean-Christophe PLAGNIOL-VILLARD
2010-09-13 15:56 ` Vincent Sanders
2010-09-13 15:43 ` Thomas Petazzoni
2010-09-13 16:00 ` Vincent Sanders
2010-09-13 18:08 ` avictor.za at gmail.com
2010-09-13 18:24 ` Russell King - ARM Linux
2010-09-13 17:24 ` Remove unused default configurations Daniel Walker
2010-09-14 7:20 ` Eric Miao
2010-10-06 7:46 ` Amit Kucheria
2010-10-06 13:03 ` Uwe Kleine-König
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1284390832-7181-3-git-send-email-vince@kyllikki.org \
--to=vince@kyllikki.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).