From: marek.vasut@gmail.com (Marek Vasut)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/11] ARM: pxa: Rename Colibri evalboard
Date: Thu, 16 Sep 2010 04:32:56 +0200 [thread overview]
Message-ID: <1284604382-23683-5-git-send-email-marek.vasut@gmail.com> (raw)
In-Reply-To: <1284604382-23683-1-git-send-email-marek.vasut@gmail.com>
Rename colibri-pxa270-evalboard to colibri-evalboard as this board is used with
all Colibri modules.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Daniel Mack <daniel@caiaq.de>
---
arch/arm/mach-pxa/Kconfig | 2 +-
arch/arm/mach-pxa/Makefile | 2 +-
arch/arm/mach-pxa/colibri-evalboard.c | 121 ++++++++++++++++++++++++++
arch/arm/mach-pxa/colibri-pxa270-evalboard.c | 121 --------------------------
arch/arm/mach-pxa/colibri-pxa270.c | 6 +-
arch/arm/mach-pxa/colibri-pxa300.c | 4 +-
arch/arm/mach-pxa/colibri-pxa320.c | 4 +-
arch/arm/mach-pxa/include/mach/colibri.h | 8 +-
8 files changed, 134 insertions(+), 134 deletions(-)
create mode 100644 arch/arm/mach-pxa/colibri-evalboard.c
delete mode 100644 arch/arm/mach-pxa/colibri-pxa270-evalboard.c
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index b44d613..e0ac5aa 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -249,7 +249,7 @@ config MACH_COLIBRI320
select PXA3xx
select CPU_PXA320
-config MACH_COLIBRI_PXA270_EVALBOARD
+config MACH_COLIBRI_EVALBOARD
bool "Toradex Colibri Evaluation Carrier Board support"
depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index e2f89c2..3197756 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -60,7 +60,7 @@ obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
obj-$(CONFIG_MACH_PCM027) += pcm027.o
obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o
-obj-$(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD) += colibri-pxa270-evalboard.o
+obj-$(CONFIG_MACH_COLIBRI_EVALBOARD) += colibri-evalboard.o
obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME) += colibri-pxa270-income.o
obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o
obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
new file mode 100644
index 0000000..6b2c800
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -0,0 +1,121 @@
+/*
+ * linux/arch/arm/mach-pxa/colibri-evalboard.c
+ *
+ * Support for Toradex Colibri Evaluation Carrier Board
+ * Daniel Mack <daniel@caiaq.de>
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/mach/arch.h>
+#include <linux/i2c.h>
+
+#include <mach/pxa27x.h>
+#include <mach/colibri.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x-udc.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data colibri_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_power = -1,
+ .gpio_card_ro = -1,
+ .detect_delay_ms = 200,
+};
+
+static void __init colibri_mmc_init(void)
+{
+ if (machine_is_colibri()) /* PXA270 Colibri */
+ colibri_mci_platform_data.gpio_card_detect =
+ GPIO0_COLIBRI_PXA270_SD_DETECT;
+ if (machine_is_colibri300()) /* PXA300 Colibri */
+ colibri_mci_platform_data.gpio_card_detect =
+ GPIO39_COLIBRI_PXA300_SD_DETECT;
+ else /* PXA320 Colibri */
+ colibri_mci_platform_data.gpio_card_detect =
+ GPIO28_COLIBRI_PXA320_SD_DETECT;
+
+ pxa_set_mci_info(&colibri_mci_platform_data);
+}
+#else
+static inline void colibri_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int colibri_ohci_init(struct device *dev)
+{
+ UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
+ return 0;
+}
+
+static struct pxaohci_platform_data colibri_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 |
+ POWER_CONTROL_LOW | POWER_SENSE_LOW,
+ .init = colibri_ohci_init,
+};
+
+static void __init colibri_uhc_init(void)
+{
+ /* Colibri PXA270 has two usb ports, TBA for 320 */
+ if (machine_is_colibri())
+ colibri_ohci_info.flags |= ENABLE_PORT2;
+
+ pxa_set_ohci_info(&colibri_ohci_info);
+}
+#else
+static inline void colibri_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * I2C RTC
+ ******************************************************************************/
+#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
+static struct i2c_board_info __initdata colibri_i2c_devs[] = {
+ {
+ I2C_BOARD_INFO("m41t00", 0x68),
+ },
+};
+
+static void __init colibri_rtc_init(void)
+{
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(colibri_i2c_devs));
+}
+#else
+static inline void colibri_rtc_init(void) {}
+#endif
+
+void __init colibri_evalboard_init(void)
+{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ colibri_mmc_init();
+ colibri_uhc_init();
+ colibri_rtc_init();
+}
diff --git a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
deleted file mode 100644
index 7f27aec..0000000
--- a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
- *
- * Support for Toradex PXA270 based Colibri Evaluation Carrier Board
- * Daniel Mack <daniel@caiaq.de>
- * Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/mach/arch.h>
-#include <linux/i2c.h>
-
-#include <mach/pxa27x.h>
-#include <mach/colibri.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <mach/pxa27x-udc.h>
-
-#include <plat/i2c.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data colibri_pxa270_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_power = -1,
- .gpio_card_ro = -1,
- .detect_delay_ms = 200,
-};
-
-static void __init colibri_pxa270_mmc_init(void)
-{
- if (machine_is_colibri()) /* PXA270 Colibri */
- colibri_pxa270_mci_platform_data.gpio_card_detect =
- GPIO0_COLIBRI_PXA270_SD_DETECT;
- if (machine_is_colibri300()) /* PXA300 Colibri */
- colibri_pxa270_mci_platform_data.gpio_card_detect =
- GPIO39_COLIBRI_PXA300_SD_DETECT;
- else /* PXA320 Colibri */
- colibri_pxa270_mci_platform_data.gpio_card_detect =
- GPIO28_COLIBRI_PXA320_SD_DETECT;
-
- pxa_set_mci_info(&colibri_pxa270_mci_platform_data);
-}
-#else
-static inline void colibri_pxa270_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int colibri_pxa270_ohci_init(struct device *dev)
-{
- UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
- return 0;
-}
-
-static struct pxaohci_platform_data colibri_pxa270_ohci_info = {
- .port_mode = PMM_PERPORT_MODE,
- .flags = ENABLE_PORT1 |
- POWER_CONTROL_LOW | POWER_SENSE_LOW,
- .init = colibri_pxa270_ohci_init,
-};
-
-static void __init colibri_pxa270_uhc_init(void)
-{
- /* Colibri PXA270 has two usb ports, TBA for 320 */
- if (machine_is_colibri())
- colibri_pxa270_ohci_info.flags |= ENABLE_PORT2;
-
- pxa_set_ohci_info(&colibri_pxa270_ohci_info);
-}
-#else
-static inline void colibri_pxa270_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * I2C RTC
- ******************************************************************************/
-#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
-static struct i2c_board_info __initdata colibri_pxa270_i2c_devs[] = {
- {
- I2C_BOARD_INFO("m41t00", 0x68),
- },
-};
-
-static void __init colibri_pxa270_rtc_init(void)
-{
- pxa_set_i2c_info(NULL);
- i2c_register_board_info(0, ARRAY_AND_SIZE(colibri_pxa270_i2c_devs));
-}
-#else
-static inline void colibri_pxa270_rtc_init(void) {}
-#endif
-
-void __init colibri_pxa270_evalboard_init(void)
-{
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
-
- colibri_pxa270_mmc_init();
- colibri_pxa270_uhc_init();
- colibri_pxa270_rtc_init();
-}
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 1024da5..dc05af4 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -35,7 +35,7 @@
/******************************************************************************
* Evaluation board MFP
******************************************************************************/
-#ifdef CONFIG_MACH_COLIBRI_PXA270_EVALBOARD
+#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
/* MMC */
GPIO32_MMC_CLK,
@@ -281,10 +281,10 @@ static void __init colibri_pxa270_init(void)
colibri_pxa270_tsc_init();
switch (colibri_pxa270_baseboard) {
- case COLIBRI_PXA270_EVALBOARD:
+ case COLIBRI_EVALBOARD:
pxa2xx_mfp_config(ARRAY_AND_SIZE(
colibri_pxa270_evalboard_pin_config));
- colibri_pxa270_evalboard_init();
+ colibri_evalboard_init();
break;
case COLIBRI_PXA270_INCOME:
pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 5bf8055..77e760f 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -32,7 +32,7 @@
#include "devices.h"
-#ifdef CONFIG_MACH_COLIBRI_PXA270_EVALBOARD
+#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {
/* MMC */
GPIO7_MMC1_CLK,
@@ -173,7 +173,7 @@ void __init colibri_pxa300_init(void)
/* Evalboard init */
pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_evalboard_pin_config));
- colibri_pxa270_evalboard_init();
+ colibri_evalboard_init();
}
MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 4257382..7c003cd 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -35,7 +35,7 @@
#include "generic.h"
#include "devices.h"
-#ifdef CONFIG_MACH_COLIBRI_PXA270_EVALBOARD
+#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {
/* MMC */
GPIO22_MMC1_CLK,
@@ -229,7 +229,7 @@ void __init colibri_pxa320_init(void)
/* Evalboard init */
pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_evalboard_pin_config));
- colibri_pxa270_evalboard_init();
+ colibri_evalboard_init();
}
MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 63a948a..388a96f 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -9,14 +9,14 @@
*/
enum {
- COLIBRI_PXA270_EVALBOARD = 0,
+ COLIBRI_EVALBOARD = 0,
COLIBRI_PXA270_INCOME,
};
-#if defined(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)
-extern void colibri_pxa270_evalboard_init(void);
+#if defined(CONFIG_MACH_COLIBRI_EVALBOARD)
+extern void colibri_evalboard_init(void);
#else
-static inline void colibri_pxa270_evalboard_init(void) {}
+static inline void colibri_evalboard_init(void) {}
#endif
#if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME)
--
1.7.1
next prev parent reply other threads:[~2010-09-16 2:32 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-16 2:32 [PATCH 01/11] ARM: pxa: Prepare pxa2xx pcmcia for pxa320 Marek Vasut
2010-09-16 2:32 ` [PATCH 02/11] ARM: pxa: Toradex Colibri PXA270 CF support Marek Vasut
2010-09-20 14:16 ` Eric Miao
2010-09-20 14:21 ` Eric Miao
2010-09-21 21:56 ` Marek Vasut
2010-09-16 2:32 ` [PATCH 03/11] ARM: pxa: Push Colibri evalboard MFP into module files Marek Vasut
2010-09-20 14:29 ` Eric Miao
2010-09-21 21:55 ` Marek Vasut
2010-09-16 2:32 ` [PATCH 04/11] ARM: pxa: Add M41T00 RTC support into Colibri evalboard Marek Vasut
2010-09-20 14:40 ` Eric Miao
2010-09-16 2:32 ` Marek Vasut [this message]
2010-09-20 14:41 ` [PATCH 05/11] ARM: pxa: Rename " Eric Miao
2010-09-21 21:53 ` Marek Vasut
2010-09-16 2:32 ` [PATCH 06/11] ARM: pxa: Colibri PXA320 PCMCIA driver Marek Vasut
2010-09-20 14:43 ` Eric Miao
2010-09-21 21:52 ` Marek Vasut
2010-09-16 2:32 ` [PATCH 07/11] ARM: pxa: Modularize Palm Tungsten|C Marek Vasut
2010-09-20 14:44 ` Eric Miao
2010-09-16 2:32 ` [PATCH 08/11] UCB1400: Pass ucb1400-gpio data through ac97 bus Marek Vasut
2010-09-20 14:45 ` Eric Miao
2010-10-01 0:15 ` Marek Vasut
2010-09-16 2:33 ` [PATCH 09/11] ARM: pxa: Correct touch IRQ passing to UCB1400 on vpac270 Marek Vasut
2010-09-20 14:46 ` Eric Miao
2010-09-16 2:33 ` [PATCH 10/11] ARM: pxa: Pass GPIO offset to ucb1400-gpio on PalmTC Marek Vasut
2010-09-20 14:47 ` Eric Miao
2010-09-16 2:33 ` [PATCH 11/11] ARM: pxa: Add gpio-leds and vibrator support to PalmTC Marek Vasut
2010-09-20 14:47 ` Eric Miao
2010-09-20 14:14 ` [PATCH 01/11] ARM: pxa: Prepare pxa2xx pcmcia for pxa320 Eric Miao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1284604382-23683-5-git-send-email-marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).