From: w.sang@pengutronix.de (Wolfram Sang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/6] mmc: sdhci-of-esdhc: factor out common stuff
Date: Wed, 29 Sep 2010 22:08:03 +0200 [thread overview]
Message-ID: <1285790884-3516-6-git-send-email-w.sang@pengutronix.de> (raw)
In-Reply-To: <1285790884-3516-1-git-send-email-w.sang@pengutronix.de>
Put everything which can be shared between the OF and platform version
of this driver into a local .h-file.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
---
Changes since last version:
* use inline for set_clock()
drivers/mmc/host/sdhci-esdhc.h | 81 +++++++++++++++++++++++++++++++++++++
drivers/mmc/host/sdhci-of-esdhc.c | 70 ++++----------------------------
2 files changed, 89 insertions(+), 62 deletions(-)
create mode 100644 drivers/mmc/host/sdhci-esdhc.h
diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h
new file mode 100644
index 0000000..7ccc8cb
--- /dev/null
+++ b/drivers/mmc/host/sdhci-esdhc.h
@@ -0,0 +1,81 @@
+/*
+ * Freescale eSDHC controller driver generics for OF and pltfm.
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2009 MontaVista Software, Inc.
+ * Copyright (c) 2010 Pengutronix e.K.
+ * Author: Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#ifndef _DRIVERS_MMC_SDHCI_ESDHC_H
+#define _DRIVERS_MMC_SDHCI_ESDHC_H
+
+/*
+ * Ops and quirks for the Freescale eSDHC controller.
+ */
+
+#define ESDHC_DEFAULT_QUIRKS (SDHCI_QUIRK_FORCE_BLK_SZ_2048 | \
+ SDHCI_QUIRK_BROKEN_CARD_DETECTION | \
+ SDHCI_QUIRK_NO_BUSY_IRQ | \
+ SDHCI_QUIRK_NONSTANDARD_CLOCK | \
+ SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | \
+ SDHCI_QUIRK_PIO_NEEDS_DELAY | \
+ SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET | \
+ SDHCI_QUIRK_NO_CARD_NO_RESET)
+
+#define ESDHC_SYSTEM_CONTROL 0x2c
+#define ESDHC_CLOCK_MASK 0x0000fff0
+#define ESDHC_PREDIV_SHIFT 8
+#define ESDHC_DIVIDER_SHIFT 4
+#define ESDHC_CLOCK_PEREN 0x00000004
+#define ESDHC_CLOCK_HCKEN 0x00000002
+#define ESDHC_CLOCK_IPGEN 0x00000001
+
+/* pltfm-specific */
+#define ESDHC_HOST_CONTROL_LE 0x20
+
+/* OF-specific */
+#define ESDHC_DMA_SYSCTL 0x40c
+#define ESDHC_DMA_SNOOP 0x00000040
+
+#define ESDHC_HOST_CONTROL_RES 0x05
+
+static inline void esdhc_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ int pre_div = 2;
+ int div = 1;
+ u32 temp;
+
+ temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
+ temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK);
+ sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+
+ if (clock == 0)
+ goto out;
+
+ while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
+ pre_div *= 2;
+
+ while (host->max_clk / pre_div / div > clock && div < 16)
+ div++;
+
+ dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
+ clock, host->max_clk / pre_div / div);
+
+ pre_div >>= 1;
+ div--;
+
+ temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
+ temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN |
+ (div << ESDHC_DIVIDER_SHIFT) | (pre_div << ESDHC_PREDIV_SHIFT));
+ sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+ mdelay(100);
+out:
+ host->clock = clock;
+}
+
+#endif /* _DRIVERS_MMC_SDHCI_ESDHC_H */
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index c8623de..277fcb9 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -18,23 +18,7 @@
#include <linux/mmc/host.h>
#include "sdhci-of.h"
#include "sdhci.h"
-
-/*
- * Ops and quirks for the Freescale eSDHC controller.
- */
-
-#define ESDHC_DMA_SYSCTL 0x40c
-#define ESDHC_DMA_SNOOP 0x00000040
-
-#define ESDHC_SYSTEM_CONTROL 0x2c
-#define ESDHC_CLOCK_MASK 0x0000fff0
-#define ESDHC_PREDIV_SHIFT 8
-#define ESDHC_DIVIDER_SHIFT 4
-#define ESDHC_CLOCK_PEREN 0x00000004
-#define ESDHC_CLOCK_HCKEN 0x00000002
-#define ESDHC_CLOCK_IPGEN 0x00000001
-
-#define ESDHC_HOST_CONTROL_RES 0x05
+#include "sdhci-esdhc.c"
static u16 esdhc_readw(struct sdhci_host *host, int reg)
{
@@ -68,51 +52,20 @@ static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg)
sdhci_be32bs_writeb(host, val, reg);
}
-static void esdhc_set_clock(struct sdhci_host *host, unsigned int clock)
-{
- int pre_div = 2;
- int div = 1;
-
- clrbits32(host->ioaddr + ESDHC_SYSTEM_CONTROL, ESDHC_CLOCK_IPGEN |
- ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK);
-
- if (clock == 0)
- goto out;
-
- while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
- pre_div *= 2;
-
- while (host->max_clk / pre_div / div > clock && div < 16)
- div++;
-
- dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
- clock, host->max_clk / pre_div / div);
-
- pre_div >>= 1;
- div--;
-
- setbits32(host->ioaddr + ESDHC_SYSTEM_CONTROL, ESDHC_CLOCK_IPGEN |
- ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN |
- div << ESDHC_DIVIDER_SHIFT | pre_div << ESDHC_PREDIV_SHIFT);
- mdelay(100);
-out:
- host->clock = clock;
-}
-
-static int esdhc_enable_dma(struct sdhci_host *host)
+static int esdhc_of_enable_dma(struct sdhci_host *host)
{
setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP);
return 0;
}
-static unsigned int esdhc_get_max_clock(struct sdhci_host *host)
+static unsigned int esdhc_of_get_max_clock(struct sdhci_host *host)
{
struct sdhci_of_host *of_host = sdhci_priv(host);
return of_host->clock;
}
-static unsigned int esdhc_get_min_clock(struct sdhci_host *host)
+static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host)
{
struct sdhci_of_host *of_host = sdhci_priv(host);
@@ -120,14 +73,7 @@ static unsigned int esdhc_get_min_clock(struct sdhci_host *host)
}
struct sdhci_of_data sdhci_esdhc = {
- .quirks = SDHCI_QUIRK_FORCE_BLK_SZ_2048 |
- SDHCI_QUIRK_BROKEN_CARD_DETECTION |
- SDHCI_QUIRK_NO_BUSY_IRQ |
- SDHCI_QUIRK_NONSTANDARD_CLOCK |
- SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
- SDHCI_QUIRK_PIO_NEEDS_DELAY |
- SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET |
- SDHCI_QUIRK_NO_CARD_NO_RESET,
+ .quirks = ESDHC_DEFAULT_QUIRKS,
.ops = {
.read_l = sdhci_be32bs_readl,
.read_w = esdhc_readw,
@@ -136,8 +82,8 @@ struct sdhci_of_data sdhci_esdhc = {
.write_w = esdhc_writew,
.write_b = esdhc_writeb,
.set_clock = esdhc_set_clock,
- .enable_dma = esdhc_enable_dma,
- .get_max_clock = esdhc_get_max_clock,
- .get_min_clock = esdhc_get_min_clock,
+ .enable_dma = esdhc_of_enable_dma,
+ .get_max_clock = esdhc_of_get_max_clock,
+ .get_min_clock = esdhc_of_get_min_clock,
},
};
--
1.7.1
next prev parent reply other threads:[~2010-09-29 20:08 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-29 20:07 [PATCH V3 0/6] SD/MMC-driver for MX35/51 (and improvements to SDHCI) Wolfram Sang
2010-09-29 20:07 ` [PATCH 1/6] mmc: sdhci-pltfm: Add structure for host-specific data Wolfram Sang
2010-09-29 21:24 ` Richard Röjfors
2010-09-30 8:16 ` Wolfram Sang
2010-09-30 9:54 ` Richard Röjfors
2010-09-30 10:19 ` Wolfram Sang
2010-09-30 11:09 ` Anton Vorontsov
2010-09-29 20:08 ` [PATCH 2/6] mmc: sdhci-pltfm: move .h-file into apropriate subdir Wolfram Sang
2010-09-29 20:08 ` [PATCH 3/6] mmc: sdhci: introduce private get_ro Wolfram Sang
2010-09-29 20:08 ` [PATCH 4/6] mmc: sdhci_pltfm: pass more data on custom init-call Wolfram Sang
2010-09-30 8:31 ` Lothar Waßmann
2010-09-30 9:42 ` Anton Vorontsov
2010-10-11 11:07 ` Wolfram Sang
2010-09-29 20:08 ` Wolfram Sang [this message]
2010-09-29 20:08 ` [PATCH 6/6] mmc: sdhci-pltfm: add pltfm-driver for imx35/51 Wolfram Sang
2010-09-29 20:14 ` Chris Ball
2010-10-02 15:15 ` [PATCH 1/4] mach-cpuimx35: remove unecessary tsc2007 functions + style cleanup Eric Bénard
2010-10-02 15:15 ` [PATCH 2/4] eukrea_mbimxsd for cpuimx35: add CAN & SDCard support Eric Bénard
2010-10-08 13:43 ` imx-for-2.6.37 broken [Was: [PATCH 2/4] eukrea_mbimxsd for cpuimx35: add CAN & SDCard support] Uwe Kleine-König
2010-10-02 15:15 ` [PATCH 3/4] i.mx25: add esdhc support Eric Bénard
2010-10-02 15:15 ` [PATCH 4/4] eukrea_mbimxsd for cpuimx25: add CAN & SDCard support Eric Bénard
2010-10-02 15:17 ` [PATCH V3 0/6] SD/MMC-driver for MX35/51 (and improvements to SDHCI) Eric Bénard
-- strict thread matches above, loose matches on Subject: below --
2010-10-11 14:21 [PATCH 0/6] SD/MMC driver for MX25/35/51 Wolfram Sang
2010-10-11 14:21 ` [PATCH 5/6] mmc: sdhci-of-esdhc: factor out common stuff Wolfram Sang
2010-10-15 10:20 [PATCH V5 0/6] SD/MMC driver for MX25/35/51 Wolfram Sang
2010-10-15 10:21 ` [PATCH 5/6] mmc: sdhci-of-esdhc: factor out common stuff Wolfram Sang
2010-10-18 16:13 ` Chris Ball
2010-10-19 2:29 ` Wolfram Sang
2010-10-19 2:36 ` Chris Ball
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1285790884-3516-6-git-send-email-w.sang@pengutronix.de \
--to=w.sang@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).