From: arun.murthy@stericsson.com (Arun Murthy)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 0/7] PWM core driver for pwm based led and backlight driver
Date: Tue, 5 Oct 2010 17:29:55 +0530 [thread overview]
Message-ID: <1286280002-1636-1-git-send-email-arun.murthy@stericsson.com> (raw)
PWM core driver for pwm based led and backlight driver.
The intention of the pwm core driver is not to break the build if two or more
pwm drivers are enabled.
Align the existing pwm drivers to make use of the pwm core driver
Arun Murthy (7):
pwm: Add pwm core driver
backlight:pwm: add an element 'name' to platform data
leds: pwm: add a new element 'name' to platform data
pwm: Align existing pwm drivers with pwm-core driver
platform: Update the pwm based led and backlight platform data
pwm: move existing pwm driver to drivers/pwm
pwm: Modify backlight and led Kconfig aligning to pwm core
arch/arm/mach-pxa/cm-x300.c | 1 +
arch/arm/mach-pxa/colibri-pxa270-income.c | 1 +
arch/arm/mach-pxa/ezx.c | 1 +
arch/arm/mach-pxa/hx4700.c | 1 +
arch/arm/mach-pxa/lpd270.c | 1 +
arch/arm/mach-pxa/magician.c | 1 +
arch/arm/mach-pxa/mainstone.c | 1 +
arch/arm/mach-pxa/mioa701.c | 1 +
arch/arm/mach-pxa/palm27x.c | 1 +
arch/arm/mach-pxa/palmtc.c | 1 +
arch/arm/mach-pxa/palmte2.c | 1 +
arch/arm/mach-pxa/pcm990-baseboard.c | 1 +
arch/arm/mach-pxa/raumfeld.c | 1 +
arch/arm/mach-pxa/tavorevb.c | 2 +
arch/arm/mach-pxa/viper.c | 1 +
arch/arm/mach-pxa/z2.c | 2 +
arch/arm/mach-pxa/zylonite.c | 1 +
arch/arm/mach-s3c2410/mach-h1940.c | 1 +
arch/arm/mach-s3c2440/mach-rx1950.c | 1 +
arch/arm/mach-s3c64xx/mach-hmt.c | 1 +
arch/arm/mach-s3c64xx/mach-smartq.c | 1 +
arch/arm/plat-mxc/pwm.c | 166 +++++++++------------
arch/arm/plat-pxa/pwm.c | 210 ++++++++++++--------------
arch/arm/plat-samsung/pwm.c | 235 +++++++++++++----------------
arch/mips/jz4740/pwm.c | 2 +-
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/leds/Kconfig | 2 +-
drivers/leds/leds-pwm.c | 4 +-
drivers/mfd/Kconfig | 9 -
drivers/mfd/Makefile | 1 -
drivers/mfd/twl-core.c | 13 ++
drivers/mfd/twl6030-pwm.c | 163 --------------------
drivers/misc/Kconfig | 9 -
drivers/misc/Makefile | 1 -
drivers/misc/ab8500-pwm.c | 168 --------------------
drivers/pwm/Kconfig | 35 +++++
drivers/pwm/Makefile | 4 +
drivers/pwm/pwm-ab8500.c | 157 +++++++++++++++++++
drivers/pwm/pwm-core.c | 130 ++++++++++++++++
drivers/pwm/pwm-twl6040.c | 196 ++++++++++++++++++++++++
drivers/video/backlight/Kconfig | 2 +-
drivers/video/backlight/pwm_bl.c | 4 +-
include/linux/leds_pwm.h | 3 +-
include/linux/pwm.h | 31 ++++-
include/linux/pwm_backlight.h | 1 +
46 files changed, 876 insertions(+), 696 deletions(-)
delete mode 100644 drivers/mfd/twl6030-pwm.c
delete mode 100644 drivers/misc/ab8500-pwm.c
create mode 100644 drivers/pwm/Kconfig
create mode 100644 drivers/pwm/Makefile
create mode 100644 drivers/pwm/pwm-ab8500.c
create mode 100644 drivers/pwm/pwm-core.c
create mode 100644 drivers/pwm/pwm-twl6040.c
--
1.7.2.dirty
next reply other threads:[~2010-10-05 11:59 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-05 11:59 Arun Murthy [this message]
2010-10-05 11:59 ` [PATCHv2 1/7] pwm: Add pwm core driver Arun Murthy
2010-10-05 19:22 ` Andrew Morton
2010-10-06 4:03 ` Arun MURTHY
2010-10-06 19:45 ` Kevin Hilman
2010-10-05 11:59 ` [PATCHv2 2/7] backlight:pwm: add an element 'name' to platform data Arun Murthy
2010-10-05 11:59 ` [PATCHv2 3/7] leds: pwm: add a new " Arun Murthy
2010-10-05 11:59 ` [PATCHv2 4/7] pwm: Align existing pwm drivers with pwm-core driver Arun Murthy
2010-10-05 12:00 ` [PATCHv2 5/7] platform: Update the pwm based led and backlight platform data Arun Murthy
2010-10-05 12:00 ` [PATCHv2 6/7] pwm: move existing pwm driver to drivers/pwm Arun Murthy
2010-10-05 12:00 ` [PATCHv2 7/7] pwm: Modify backlight and led Kconfig aligning to pwm core Arun Murthy
2010-10-05 15:05 ` [PATCHv2 0/7] PWM core driver for pwm based led and backlight driver Kevin Hilman
2010-10-06 3:46 ` Arun MURTHY
-- strict thread matches above, loose matches on Subject: below --
2010-09-28 7:40 Arun Murthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1286280002-1636-1-git-send-email-arun.murthy@stericsson.com \
--to=arun.murthy@stericsson.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).