From mboxrd@z Thu Jan 1 00:00:00 1970 From: johlstei@codeaurora.org (Jeff Ohlstein) Date: Wed, 6 Oct 2010 00:42:55 -0700 Subject: [PATCH 16/20 v2] msm: MSM8X60 simulator board support In-Reply-To: <1286350979-19328-1-git-send-email-johlstei@codeaurora.org> References: <1286350979-19328-1-git-send-email-johlstei@codeaurora.org> Message-ID: <1286350979-19328-17-git-send-email-johlstei@codeaurora.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Steve Muckle Board configuration for MSM8X60 simulation. Signed-off-by: Steve Muckle --- arch/arm/mach-msm/Kconfig | 8 +++++++- arch/arm/mach-msm/board-msm8x60.c | 10 +++++++++- 2 files changed, 16 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 910db2e..d5076eb 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -38,7 +38,7 @@ config ARCH_MSM8X60 select ARM_GIC select CPU_V7 select MSM_V2_TLMM - select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3) + select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3 && !MACH_MSM8X60_SIM) endchoice @@ -103,6 +103,12 @@ config MACH_MSM8X60_SURF help Support for the Qualcomm MSM8x60 SURF eval board. +config MACH_MSM8X60_SIM + depends on ARCH_MSM8X60 + bool "MSM8x60 Simulator" + help + Support for the Qualcomm MSM8x60 simulator. + endmenu config MSM_DEBUG_UART diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index a8a4d8d..95b0e36 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -54,7 +54,8 @@ static void __init msm8x60_init_irq(void) /* RUMI does not adhere to GIC spec by enabling STIs by default. * Enable/clear is supposed to be RO for STIs, but is RW on RUMI. */ - writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET); + if (!machine_is_msm8x60_sim()) + writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET); /* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet * as they are configured as level, which does not play nice with @@ -83,3 +84,10 @@ MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF") .init_machine = msm8x60_init, .timer = &msm_timer, MACHINE_END + +MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR") + .map_io = msm8x60_map_io, + .init_irq = msm8x60_init_irq, + .init_machine = msm8x60_init, + .timer = &msm_timer, +MACHINE_END -- 1.7.2.1 Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.