[PATCH 0/3] omap4: pandaboard: machine cleanups

[PATCH 0/3] omap4: pandaboard: machine cleanups

[David Anders]

PandaBoard machine file related cleanups.

David Anders (3):
  omap4: pandaboard: remove unused hsmmc definition
  omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set
  omap4: pandaboard: enable the ehci port on pandaboard

 arch/arm/mach-omap2/board-omap4panda.c |   69 +++++++++++++++++++++++++++++---
 1 files changed, 63 insertions(+), 6 deletions(-)

[PATCH 1/3] omap4: pandaboard: remove unused hsmmc definition

[David Anders]

remove the second hsmmc definition as it is only used on the
expansion header of the PandaBoard and can be mux for other
functions.

Signed-off-by: David Anders <x0132446@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
---
 arch/arm/mach-omap2/board-omap4panda.c |    6 +-----
 1 files changed, 1 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 992a03e..dc16884 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -98,10 +98,6 @@ static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = {
 		.supply = "vmmc",
 		.dev_name = "mmci-omap-hs.0",
 	},
-	{
-		.supply = "vmmc",
-		.dev_name = "mmci-omap-hs.1",
-	},
 };
 
 static int omap4_twl6030_hsmmc_late_init(struct device *dev)
@@ -187,7 +183,7 @@ static struct regulator_init_data omap4_panda_vmmc = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 2,
+	.num_consumer_supplies  = 1,
 	.consumer_supplies      = omap4_panda_vmmc_supply,
 };
 
-- 
1.7.0.4

[PATCH 2/3] omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set

[David Anders]

Avoid possible crash if CONFIG_MMC_OMAP_HS is not set.

Signed-off-by: David Anders <x0132446@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
---
 arch/arm/mach-omap2/board-omap4panda.c |    9 ++++++++-
 1 files changed, 8 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index dc16884..9327ad4 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -116,7 +116,14 @@ static int omap4_twl6030_hsmmc_late_init(struct device *dev)
 
 static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
 {
-	struct omap_mmc_platform_data *pdata = dev->platform_data;
+	struct omap_mmc_platform_data *pdata;
+
+	/* dev can be null if CONFIG_MMC_OMAP_HS is not set */
+	if (!dev) {
+		pr_err("Failed omap4_twl6030_hsmmc_set_late_init\n");
+		return;
+	}
+	pdata = dev->platform_data;
 
 	pdata->init =	omap4_twl6030_hsmmc_late_init;
 }
-- 
1.7.0.4

[PATCH 3/3] omap4: pandaboard: enable the ehci port on pandaboard

[David Anders]

The OMAP4 PandaBoard has EHCI port1 hooked up to an external
SMSC3320 transciever. GPIO 1 is used to power on the transceiver
and GPIO 62 for reset on the transceiver.

Signed-off-by: David Anders <x0132446@ti.com>
---
 arch/arm/mach-omap2/board-omap4panda.c |   54 ++++++++++++++++++++++++++++++++
 1 files changed, 54 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 9327ad4..a9d8a19 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -41,6 +41,9 @@
 #include "hsmmc.h"
 #include "control.h"
 
+#define GPIO_HUB_POWER		1
+#define GPIO_HUB_NRESET		62
+
 static struct gpio_led gpio_leds[] = {
 	{
 		.name			= "pandaboard::status1",
@@ -78,6 +81,56 @@ static void __init omap4_panda_init_irq(void)
 	omap_gpio_init();
 }
 
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.phy_reset  = false,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+static void __init omap4_ehci_init(void)
+{
+	int ret;
+
+
+	/* disable the power to the usb hub prior to init */
+	ret = gpio_request(GPIO_HUB_POWER, "hub_power");
+	if (ret) {
+		pr_err("Cannot request GPIO %d\n", GPIO_HUB_POWER);
+		goto error1;
+	}
+	gpio_export(GPIO_HUB_POWER, 0);
+	gpio_direction_output(GPIO_HUB_POWER, 0);
+	gpio_set_value(GPIO_HUB_POWER, 0);
+
+	/* reset phy+hub */
+	ret = gpio_request(GPIO_HUB_NRESET, "hub_nreset");
+	if (ret) {
+		pr_err("Cannot request GPIO %d\n", GPIO_HUB_NRESET);
+		goto error2;
+	}
+	gpio_export(GPIO_HUB_NRESET, 0);
+	gpio_direction_output(GPIO_HUB_NRESET, 0);
+	gpio_set_value(GPIO_HUB_NRESET, 0);
+	gpio_set_value(GPIO_HUB_NRESET, 1);
+
+	usb_ehci_init(&ehci_pdata);
+
+	/* enable power to hub */
+	gpio_set_value(GPIO_HUB_POWER, 1);
+	return;
+
+error2:
+	gpio_free(GPIO_HUB_POWER);
+error1:
+	pr_err("Unable to initialize EHCI power/reset\n");
+	return;
+
+}
+
 static struct omap_musb_board_data musb_board_data = {
 	.interface_type		= MUSB_INTERFACE_UTMI,
 	.mode			= MUSB_PERIPHERAL,
@@ -314,6 +367,7 @@ static void __init omap4_panda_init(void)
 	omap4_twl6030_hsmmc_init(mmc);
 	/* OMAP4 Panda uses internal transceiver so register nop transceiver */
 	usb_nop_xceiv_register();
+	omap4_ehci_init();
 	/* FIXME: allow multi-omap to boot until musb is updated for omap4 */
 	if (!cpu_is_omap44xx())
 		usb_musb_init(&musb_board_data);
-- 
1.7.0.4

[PATCH 0/3] omap4: pandaboard: machine cleanups

[Tony Lindgren]

* David Anders <x0132446@ti.com> [101007 12:28]:
> PandaBoard machine file related cleanups.
> 
> David Anders (3):
>   omap4: pandaboard: remove unused hsmmc definition
>   omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set
>   omap4: pandaboard: enable the ehci port on pandaboard

Thanks, adding these into omap-for-linus.

Regards,

Tony