From: eric@eukrea.com (Eric Bénard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] iomux-mx51: fix GPIO_1_xx 's IOMUX configuration
Date: Tue, 12 Oct 2010 14:23:57 +0200 [thread overview]
Message-ID: <1286886237-29014-3-git-send-email-eric@eukrea.com> (raw)
In-Reply-To: <1286886237-29014-1-git-send-email-eric@eukrea.com>
this patch really configure the GPIO in GPIO mode.
Signed-off-by: Eric B?nard <eric@eukrea.com>
---
arch/arm/plat-mxc/include/mach/iomux-mx51.h | 20 ++++++++++----------
1 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
index 93141d1..e46b1c2 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -366,20 +366,20 @@ typedef enum iomux_config {
MX51_SDHCI_PAD_CTRL)
#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7D0, 0x3C8, IOMUX_CONFIG_SION, 0x0, 0, \
MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_GPIO_1_0__GPIO_1_0 IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_1__GPIO_1_1 IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_2__GPIO_1_2 IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_0__GPIO_1_0 IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_1__GPIO_1_1 IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_2__GPIO_1_2 IOMUX_PAD(0x7D4, 0x3CC, 1, 0x0, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_GPIO_1_2__I2C2_SCL IOMUX_PAD(0x7D4, 0x3CC, (2 | IOMUX_CONFIG_SION), \
0x9b8, 3, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_GPIO_1_3__GPIO_1_3 IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_3__GPIO_1_3 IOMUX_PAD(0x7D8, 0x3D0, 1, 0x0, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_GPIO_1_3__I2C2_SDA IOMUX_PAD(0x7D8, 0x3D0, (2 | IOMUX_CONFIG_SION), \
0x9bc, 3, MX51_I2C_PAD_CTRL)
#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_4__GPIO_1_4 IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_5__GPIO_1_5 IOMUX_PAD(0x808, 0x3DC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_6__GPIO_1_6 IOMUX_PAD(0x80C, 0x3E0, 0, 0x0, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_7__GPIO_1_7 IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_8__GPIO_1_8 IOMUX_PAD(0x814, 0x3E8, 0, 0x0, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_9__GPIO_1_9 IOMUX_PAD(0x818, 0x3EC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_4__GPIO_1_4 IOMUX_PAD(0x804, 0x3D8, 1, 0x0, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_5__GPIO_1_5 IOMUX_PAD(0x808, 0x3DC, 1, 0x0, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_6__GPIO_1_6 IOMUX_PAD(0x80C, 0x3E0, 1, 0x0, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_7__GPIO_1_7 IOMUX_PAD(0x810, 0x3E4, 1, 0x0, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_8__GPIO_1_8 IOMUX_PAD(0x814, 0x3E8, 1, 0x0, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_9__GPIO_1_9 IOMUX_PAD(0x818, 0x3EC, 1, 0x0, 0, MX51_GPIO_PAD_CTRL)
#endif /* __MACH_IOMUX_MX51_H__ */
--
1.7.0.4
next prev parent reply other threads:[~2010-10-12 12:23 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-12 12:23 [PATCH 1/3] imx-esdhc: update devices registration Eric Bénard
2010-10-12 12:23 ` [PATCH 2/3] mx25: fix compile error in platform-imx-dma.c Eric Bénard
2010-10-12 12:35 ` Uwe Kleine-König
2010-10-12 12:23 ` Eric Bénard [this message]
2010-10-12 12:31 ` [PATCH v2 1/3] imx-esdhc: update devices registration Eric Bénard
2010-10-12 12:33 ` [PATCH " Uwe Kleine-König
2010-10-12 12:57 ` Eric Bénard
2010-10-12 13:04 ` Uwe Kleine-König
2010-10-12 14:58 ` [PATCH v3] " Eric Bénard
2010-10-12 15:08 ` Uwe Kleine-König
2010-10-12 15:16 ` Eric Bénard
2010-10-12 15:31 ` Wolfram Sang
2010-10-12 17:33 ` [PATCH v4] " Eric Bénard
2010-10-15 9:01 ` Uwe Kleine-König
2010-10-15 9:16 ` Eric Bénard
2010-10-20 14:55 ` Uwe Kleine-König
2010-10-20 15:05 ` Eric Bénard
2010-10-20 15:44 ` Uwe Kleine-König
2010-10-21 19:47 ` Eric Bénard
2010-10-22 7:20 ` [PATCH v2] ARM: mx3: fix build failure concerning MXC_INT_MMC_SDHC2 Uwe Kleine-König
2010-10-22 9:56 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1286886237-29014-3-git-send-email-eric@eukrea.com \
--to=eric@eukrea.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).