[PATCH 1/5] mach-pcm037_eet: fix compile errors

[PATCH 1/5] mach-pcm037_eet: fix compile errors

[Eric Bénard]

this patch fix the following errors :
arch/arm/mach-mx3/mach-pcm037_eet.c:62: error: implicit declaration of function 'MXC_SPI_CS'
arch/arm/mach-mx3/mach-pcm037_eet.c:185: error: implicit declaration of function 'imx35_add_spi_imx0'

from the Kconfig pcm037 is i.MX31 based and not i.MX35 so replace
imx35_add_spi_imx0 by imx31_add_spi_imx0

Signed-off-by: Eric B?nard <eric@eukrea.com>
---
 arch/arm/mach-mx3/mach-pcm037_eet.c |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index c8b9821..2ee5d09 100644
--- a/arch/arm/mach-mx3/mach-pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
@@ -14,11 +14,13 @@
 
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
+#include <mach/spi.h>
 
 #include <asm/mach-types.h>
 
 #include "pcm037.h"
 #include "devices.h"
+#include "devices-imx31.h"
 
 static unsigned int pcm037_eet_pins[] = {
 	/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
@@ -181,7 +183,7 @@ static int eet_init_devices(void)
 	/* SPI */
 	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
 #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-	imx35_add_spi_imx0(&pcm037_spi1_pdata);
+	imx31_add_spi_imx0(&pcm037_spi1_pdata);
 #endif
 
 	platform_device_register(&pcm037_gpio_keys_device);
-- 
1.7.0.4

[PATCH 2/5] mx25: add defconfig

[Eric Bénard]

Signed-off-by: Eric B?nard <eric@eukrea.com>
---
 arch/arm/configs/mx25_defconfig |  159 +++++++++++++++++++++++++++++++++++++++
 1 files changed, 159 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/configs/mx25_defconfig

diff --git a/arch/arm/configs/mx25_defconfig b/arch/arm/configs/mx25_defconfig
new file mode 100644
index 0000000..25aa600
--- /dev/null
+++ b/arch/arm/configs/mx25_defconfig
@@ -0,0 +1,159 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_ARCH_MXC=y
+CONFIG_ARCH_MX25=y
+CONFIG_MACH_MX25_3DS=y
+CONFIG_MACH_EUKREA_CPUIMX25=y
+CONFIG_MXC_IRQ_PRIOR=y
+CONFIG_MXC_PWM=y
+CONFIG_MXC_DEBUG_BOARD=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+CONFIG_CAN_VCAN=y
+CONFIG_CAN_DEV=y
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_FLEXCAN=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_MXC=y
+CONFIG_MTD_UBI=y
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_FEC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_TSC2007=y
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_IMX=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_VIDEO_IR_I2C is not set
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_PLATFORM=y
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_FB=y
+CONFIG_FB_IMX=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_SOC_EUKREA_TLV320=y
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PCF8563=y
+CONFIG_DMADEVICES=y
+CONFIG_EXT3_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_AUTOFS4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
-- 
1.7.0.4

[PATCH 3/5] mx27: update defconfig

[Eric Bénard]

Signed-off-by: Eric B?nard <eric@eukrea.com>
---
 arch/arm/configs/mx27_defconfig |   60 ++++++++++++++++++++++++++++++++++----
 1 files changed, 53 insertions(+), 7 deletions(-)

diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
index 813cfb3..9623f42 100644
--- a/arch/arm/configs/mx27_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -72,6 +72,10 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_MXC=y
 CONFIG_MTD_UBI=y
 CONFIG_EEPROM_AT24=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_FEC=y
@@ -79,12 +83,12 @@ CONFIG_FEC=y
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_KEYBOARD_IMX=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=m
+CONFIG_TOUCHSCREEN_ADS7846=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
@@ -94,21 +98,64 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_IMX=y
 CONFIG_SPI=y
 CONFIG_SPI_IMX=y
+CONFIG_GPIO_SYSFS=y
 CONFIG_W1=y
 CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_IMX2_WDT=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_MT9M001=y
+CONFIG_SOC_CAMERA_MT9M111=y
+CONFIG_SOC_CAMERA_MT9T031=y
+CONFIG_SOC_CAMERA_MT9T112=y
+CONFIG_SOC_CAMERA_MT9V022=y
+CONFIG_SOC_CAMERA_RJ54N1=y
+CONFIG_SOC_CAMERA_TW9910=y
+CONFIG_SOC_CAMERA_PLATFORM=y
+CONFIG_SOC_CAMERA_OV772X=y
+CONFIG_SOC_CAMERA_OV9640=y
+CONFIG_VIDEO_MX2=y
+# CONFIG_RADIO_ADAPTERS is not set
 CONFIG_FB=y
 CONFIG_FB_IMX=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=m
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_SOC_PHYCORE_AC97=y
+CONFIG_SND_SOC_EUKREA_TLV320=y
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
 # CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=y
 CONFIG_USB_ULPI=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
 CONFIG_MMC_MXC=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_DNOTIFY is not set
@@ -119,7 +166,6 @@ CONFIG_UBIFS_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-CONFIG_NLS=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_ISO8859_1=y
-- 
1.7.0.4

[PATCH 4/5] mx3: update defconfig

[Eric Bénard]

Signed-off-by: Eric B?nard <eric@eukrea.com>
---
 arch/arm/configs/mx3_defconfig |   60 ++++++++++++++++++++++++++++++++++++++--
 1 files changed, 57 insertions(+), 3 deletions(-)

diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index f0c339f..5a3240e 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -27,6 +27,7 @@ CONFIG_MACH_KZM_ARM11_01=y
 CONFIG_MACH_EUKREA_CPUIMX35=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
+CONFIG_ARM_ERRATA_411920=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
@@ -49,6 +50,13 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+CONFIG_CAN_VCAN=y
+CONFIG_CAN_DEV=y
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_FLEXCAN=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_FW_LOADER=m
 CONFIG_MTD=y
@@ -63,6 +71,10 @@ CONFIG_MTD_NAND_MXC=y
 CONFIG_MTD_UBI=y
 # CONFIG_BLK_DEV is not set
 CONFIG_EEPROM_AT24=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_SMSC_PHY=y
 CONFIG_NET_ETHERNET=y
@@ -71,8 +83,12 @@ CONFIG_DNET=y
 CONFIG_FEC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_IMX=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_TSC2007=y
 # CONFIG_VT is not set
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_EXTENDED=y
@@ -84,6 +100,9 @@ CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_IMX=y
+CONFIG_GPIO_SYSFS=y
 CONFIG_W1=y
 CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y
@@ -104,9 +123,44 @@ CONFIG_SOC_CAMERA_OV772X=y
 CONFIG_VIDEO_MX3=y
 # CONFIG_RADIO_ADAPTERS is not set
 CONFIG_FB=y
-# CONFIG_USB_SUPPORT is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_MXC_SOC_WM1133_EV1=y
+CONFIG_SND_SOC_PHYCORE_AC97=y
+CONFIG_SND_SOC_EUKREA_TLV320=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=y
+CONFIG_USB_ULPI=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_MMC_MXC=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PCF8563=y
 CONFIG_DMADEVICES=y
 # CONFIG_DNOTIFY is not set
 CONFIG_TMPFS=y
-- 
1.7.0.4

[PATCH 5/5] mx51: update defconfig

[Eric Bénard]

Signed-off-by: Eric B?nard <eric@eukrea.com>
---
 arch/arm/configs/mx51_defconfig |   50 ++++++++++++++++++++++++++++++++------
 1 files changed, 42 insertions(+), 8 deletions(-)

diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
index 163cfee..de3e459 100644
--- a/arch/arm/configs/mx51_defconfig
+++ b/arch/arm/configs/mx51_defconfig
@@ -17,6 +17,12 @@ CONFIG_ARCH_MX5=y
 CONFIG_MACH_MX51_BABBAGE=y
 CONFIG_MACH_MX51_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX51=y
+CONFIG_MACH_EUKREA_CPUIMX51SD=y
+CONFIG_MACH_MX51_EFIKAMX=y
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_458693=y
+CONFIG_ARM_ERRATA_460075=y
+CONFIG_ARM_ERRATA_743622=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT_VOLUNTARY=y
@@ -41,9 +47,21 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+CONFIG_CAN_DEV=y
+CONFIG_CAN_MCP251X=y
 # CONFIG_WIRELESS is not set
 # CONFIG_STANDALONE is not set
 CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_MXC=y
+CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
@@ -83,8 +101,12 @@ CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=m
+CONFIG_KEYBOARD_MATRIX=y
+CONFIG_KEYBOARD_IMX=y
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_TSC2007=y
 CONFIG_SERIO_SERPORT=m
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_DEVKMEM is not set
@@ -94,24 +116,36 @@ CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_ALGOBIT=m
 CONFIG_I2C_ALGOPCF=m
 CONFIG_I2C_ALGOPCA=m
+CONFIG_I2C_GPIO=y
+CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_IMX=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=y
+CONFIG_USB_ULPI=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_PCF8563=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -136,6 +170,8 @@ CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_CONFIGFS_FS=m
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
@@ -158,8 +194,6 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_SECURITYFS=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 CONFIG_CRC_CCITT=m
-- 
1.7.0.4

[PATCH 1/5] mach-pcm037_eet: fix compile errors

[Uwe Kleine-König]

Hello,

On Fri, Oct 15, 2010 at 01:00:01AM +0200, Eric B?nard wrote:
> this patch fix the following errors :
> arch/arm/mach-mx3/mach-pcm037_eet.c:62: error: implicit declaration of function 'MXC_SPI_CS'
> arch/arm/mach-mx3/mach-pcm037_eet.c:185: error: implicit declaration of function 'imx35_add_spi_imx0'
> 
> from the Kconfig pcm037 is i.MX31 based and not i.MX35 so replace
> imx35_add_spi_imx0 by imx31_add_spi_imx0
Grrr, sorry.

Can you please add a reference to
a4dc013570e08ec4947b10fa78080da767b30527 in the commit log?

> 
> Signed-off-by: Eric B?nard <eric@eukrea.com>
> ---
>  arch/arm/mach-mx3/mach-pcm037_eet.c |    4 +++-
>  1 files changed, 3 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
> index c8b9821..2ee5d09 100644
> --- a/arch/arm/mach-mx3/mach-pcm037_eet.c
> +++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
> @@ -14,11 +14,13 @@
>  
>  #include <mach/common.h>
>  #include <mach/iomux-mx3.h>
> +#include <mach/spi.h>
This is not needed as devices-imx31.h includes devices-common.h which in
turn includes mach/spi.h.

>  
>  #include <asm/mach-types.h>
>  
>  #include "pcm037.h"
>  #include "devices.h"
> +#include "devices-imx31.h"
>  
>  static unsigned int pcm037_eet_pins[] = {
>  	/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
> @@ -181,7 +183,7 @@ static int eet_init_devices(void)
>  	/* SPI */
>  	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
>  #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
> -	imx35_add_spi_imx0(&pcm037_spi1_pdata);
> +	imx31_add_spi_imx0(&pcm037_spi1_pdata);
>  #endif
>  
>  	platform_device_register(&pcm037_gpio_keys_device);
Other than that the change is OK.

Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[PATCH 2/5] mx25: add defconfig

[Uwe Kleine-König]

On Fri, Oct 15, 2010 at 01:00:02AM +0200, Eric B?nard wrote:
> Signed-off-by: Eric B?nard <eric@eukrea.com>
I'd like to see mx25 in a defconfig, too.  In case RMK subjects
that adding a defconfig isn't sensible, I think the best bet we have is
merging mx3 and mx25 into mach-imx and working to allow compiling a
kernel that supports these two in a single kernel.  (mx3 and mx25 share
PHYS_OFFSET, so this is easier than the other merges.)

Best regards
Uwe

> ---
>  arch/arm/configs/mx25_defconfig |  159 +++++++++++++++++++++++++++++++++++++++
>  1 files changed, 159 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/configs/mx25_defconfig
> 
> diff --git a/arch/arm/configs/mx25_defconfig b/arch/arm/configs/mx25_defconfig
> new file mode 100644
> index 0000000..25aa600
> --- /dev/null
> +++ b/arch/arm/configs/mx25_defconfig
> @@ -0,0 +1,159 @@
> +CONFIG_EXPERIMENTAL=y
> +CONFIG_SYSVIPC=y
> +CONFIG_IKCONFIG=y
> +CONFIG_IKCONFIG_PROC=y
> +CONFIG_LOG_BUF_SHIFT=14
> +CONFIG_SYSFS_DEPRECATED_V2=y
> +CONFIG_EMBEDDED=y
> +CONFIG_SLAB=y
> +CONFIG_MODULES=y
> +CONFIG_MODULE_UNLOAD=y
> +CONFIG_MODULE_FORCE_UNLOAD=y
> +CONFIG_MODVERSIONS=y
> +# CONFIG_BLK_DEV_BSG is not set
> +CONFIG_DEFAULT_NOOP=y
> +CONFIG_ARCH_MXC=y
> +CONFIG_ARCH_MX25=y
> +CONFIG_MACH_MX25_3DS=y
> +CONFIG_MACH_EUKREA_CPUIMX25=y
> +CONFIG_MXC_IRQ_PRIOR=y
> +CONFIG_MXC_PWM=y
> +CONFIG_MXC_DEBUG_BOARD=y
> +CONFIG_NO_HZ=y
> +CONFIG_HIGH_RES_TIMERS=y
> +CONFIG_PREEMPT=y
> +CONFIG_AEABI=y
> +CONFIG_ZBOOT_ROM_TEXT=0x0
> +CONFIG_ZBOOT_ROM_BSS=0x0
> +CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
Do you really want this?

> +CONFIG_NET=y
> +CONFIG_PACKET=y
> +CONFIG_UNIX=y
> +CONFIG_INET=y
> +CONFIG_IP_PNP=y
> +CONFIG_IP_PNP_DHCP=y
> +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
> +# CONFIG_INET_XFRM_MODE_TUNNEL is not set
> +# CONFIG_INET_XFRM_MODE_BEET is not set
> +# CONFIG_INET_LRO is not set
> +# CONFIG_INET_DIAG is not set
> +# CONFIG_IPV6 is not set
> +CONFIG_CAN=y
> +CONFIG_CAN_RAW=y
> +CONFIG_CAN_BCM=y
> +CONFIG_CAN_VCAN=y
> +CONFIG_CAN_DEV=y
> +CONFIG_CAN_CALC_BITTIMING=y
> +CONFIG_CAN_FLEXCAN=y
> +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> +CONFIG_MTD=y
> +CONFIG_MTD_PARTITIONS=y
> +CONFIG_MTD_CMDLINE_PARTS=y
> +CONFIG_MTD_CHAR=y
> +CONFIG_MTD_BLOCK=y
> +CONFIG_MTD_CFI=y
> +CONFIG_MTD_PHYSMAP=y
> +CONFIG_MTD_NAND=y
> +CONFIG_MTD_NAND_MXC=y
> +CONFIG_MTD_UBI=y
> +# CONFIG_BLK_DEV is not set
> +# CONFIG_MISC_DEVICES is not set
> +CONFIG_SCSI=y
> +CONFIG_BLK_DEV_SD=y
> +CONFIG_CHR_DEV_SG=y
> +CONFIG_SCSI_MULTI_LUN=y
> +# CONFIG_SCSI_LOWLEVEL is not set
> +CONFIG_NETDEVICES=y
> +CONFIG_SMSC_PHY=y
> +CONFIG_NET_ETHERNET=y
> +CONFIG_MII=y
> +CONFIG_FEC=y
> +# CONFIG_NETDEV_1000 is not set
> +# CONFIG_NETDEV_10000 is not set
> +CONFIG_INPUT_EVDEV=y
> +# CONFIG_KEYBOARD_ATKBD is not set
> +CONFIG_KEYBOARD_GPIO=y
> +# CONFIG_INPUT_MOUSE is not set
> +CONFIG_INPUT_TOUCHSCREEN=y
> +CONFIG_TOUCHSCREEN_TSC2007=y
> +# CONFIG_SERIO is not set
> +# CONFIG_VT is not set
> +CONFIG_SERIAL_IMX=y
> +CONFIG_SERIAL_IMX_CONSOLE=y
> +# CONFIG_LEGACY_PTYS is not set
> +# CONFIG_HW_RANDOM is not set
> +CONFIG_I2C=y
> +CONFIG_I2C_CHARDEV=y
> +CONFIG_I2C_IMX=y
> +CONFIG_GPIO_SYSFS=y
> +# CONFIG_HWMON is not set
> +# CONFIG_MFD_SUPPORT is not set
> +CONFIG_MEDIA_SUPPORT=y
> +CONFIG_VIDEO_DEV=y
> +# CONFIG_VIDEO_ALLOW_V4L1 is not set
> +# CONFIG_VIDEO_IR_I2C is not set
> +CONFIG_SOC_CAMERA=y
> +CONFIG_SOC_CAMERA_PLATFORM=y
> +# CONFIG_RADIO_ADAPTERS is not set
> +CONFIG_FB=y
> +CONFIG_FB_IMX=y
> +CONFIG_BACKLIGHT_LCD_SUPPORT=y
> +CONFIG_LCD_CLASS_DEVICE=y
> +CONFIG_LCD_PLATFORM=m
> +CONFIG_BACKLIGHT_CLASS_DEVICE=y
> +CONFIG_LOGO=y
> +CONFIG_SOUND=y
> +CONFIG_SND=y
> +CONFIG_SND_SEQUENCER=y
> +CONFIG_SND_MIXER_OSS=y
> +CONFIG_SND_PCM_OSS=y
> +CONFIG_SND_SEQUENCER_OSS=y
> +CONFIG_SND_HRTIMER=y
> +# CONFIG_SND_DRIVERS is not set
> +# CONFIG_SND_ARM is not set
> +CONFIG_SND_SOC=y
> +CONFIG_SND_IMX_SOC=y
> +CONFIG_SND_SOC_EUKREA_TLV320=y
> +CONFIG_USB=y
> +CONFIG_USB_DEVICEFS=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_MXC=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_ETH=y
> +CONFIG_MMC=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_PLTFM=y
> +CONFIG_MMC_SDHCI_ESDHC_IMX=y
> +CONFIG_NEW_LEDS=y
> +CONFIG_LEDS_CLASS=y
> +CONFIG_LEDS_GPIO=y
> +CONFIG_LEDS_TRIGGERS=y
> +CONFIG_LEDS_TRIGGER_TIMER=y
> +CONFIG_LEDS_TRIGGER_HEARTBEAT=y
> +CONFIG_LEDS_TRIGGER_BACKLIGHT=y
> +CONFIG_LEDS_TRIGGER_GPIO=y
> +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
> +CONFIG_RTC_CLASS=y
> +CONFIG_RTC_DRV_PCF8563=y
> +CONFIG_DMADEVICES=y
> +CONFIG_EXT3_FS=y
> +# CONFIG_DNOTIFY is not set
> +CONFIG_AUTOFS4_FS=y
> +CONFIG_MSDOS_FS=y
> +CONFIG_VFAT_FS=y
> +CONFIG_TMPFS=y
> +CONFIG_JFFS2_FS=y
> +CONFIG_UBIFS_FS=y
> +CONFIG_NFS_FS=y
> +CONFIG_NFS_V3=y
> +CONFIG_NFS_V4=y
> +CONFIG_ROOT_NFS=y
> +CONFIG_PARTITION_ADVANCED=y
> +CONFIG_NLS_CODEPAGE_437=y
> +CONFIG_NLS_ISO8859_1=y
> +# CONFIG_ENABLE_WARN_DEPRECATED is not set
> +# CONFIG_ENABLE_MUST_CHECK is not set
> +# CONFIG_RCU_CPU_STALL_DETECTOR is not set
> +CONFIG_SYSCTL_SYSCALL_CHECK=y
> +# CONFIG_CRYPTO_ANSI_CPRNG is not set
> -- 

-- 
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[PATCH 3/5] mx27: update defconfig

[Uwe Kleine-König]

On Fri, Oct 15, 2010 at 01:00:03AM +0200, Eric B?nard wrote:
> Signed-off-by: Eric B?nard <eric@eukrea.com>
> ---
OK in general, though I would prefer a more verbose commit log about
what you (or others) changed and why.

Best regards
Uwe

>  arch/arm/configs/mx27_defconfig |   60 ++++++++++++++++++++++++++++++++++----
>  1 files changed, 53 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
> index 813cfb3..9623f42 100644
> --- a/arch/arm/configs/mx27_defconfig
> +++ b/arch/arm/configs/mx27_defconfig
> @@ -72,6 +72,10 @@ CONFIG_MTD_NAND=y
>  CONFIG_MTD_NAND_MXC=y
>  CONFIG_MTD_UBI=y
>  CONFIG_EEPROM_AT24=y
> +CONFIG_SCSI=y
> +CONFIG_BLK_DEV_SD=y
> +CONFIG_SCSI_MULTI_LUN=y
> +# CONFIG_SCSI_LOWLEVEL is not set
>  CONFIG_NETDEVICES=y
>  CONFIG_NET_ETHERNET=y
>  CONFIG_FEC=y
> @@ -79,12 +83,12 @@ CONFIG_FEC=y
>  # CONFIG_NETDEV_10000 is not set
>  # CONFIG_INPUT_MOUSEDEV is not set
>  CONFIG_INPUT_EVDEV=y
> -# CONFIG_INPUT_KEYBOARD is not set
> +CONFIG_KEYBOARD_IMX=y
>  # CONFIG_INPUT_MOUSE is not set
>  CONFIG_INPUT_TOUCHSCREEN=y
> -CONFIG_TOUCHSCREEN_ADS7846=m
> -# CONFIG_SERIO is not set
> -CONFIG_SERIAL_8250=m
> +CONFIG_TOUCHSCREEN_ADS7846=y
> +CONFIG_SERIAL_8250=y
> +CONFIG_SERIAL_8250_CONSOLE=y
>  CONFIG_SERIAL_IMX=y
>  CONFIG_SERIAL_IMX_CONSOLE=y
>  # CONFIG_LEGACY_PTYS is not set
> @@ -94,21 +98,64 @@ CONFIG_I2C_CHARDEV=y
>  CONFIG_I2C_IMX=y
>  CONFIG_SPI=y
>  CONFIG_SPI_IMX=y
> +CONFIG_GPIO_SYSFS=y
>  CONFIG_W1=y
>  CONFIG_W1_MASTER_MXC=y
>  CONFIG_W1_SLAVE_THERM=y
>  # CONFIG_HWMON is not set
> +CONFIG_WATCHDOG=y
> +CONFIG_IMX2_WDT=y
> +CONFIG_MEDIA_SUPPORT=y
> +CONFIG_VIDEO_DEV=y
> +CONFIG_SOC_CAMERA=y
> +CONFIG_SOC_CAMERA_MT9M001=y
> +CONFIG_SOC_CAMERA_MT9M111=y
> +CONFIG_SOC_CAMERA_MT9T031=y
> +CONFIG_SOC_CAMERA_MT9T112=y
> +CONFIG_SOC_CAMERA_MT9V022=y
> +CONFIG_SOC_CAMERA_RJ54N1=y
> +CONFIG_SOC_CAMERA_TW9910=y
> +CONFIG_SOC_CAMERA_PLATFORM=y
> +CONFIG_SOC_CAMERA_OV772X=y
> +CONFIG_SOC_CAMERA_OV9640=y
> +CONFIG_VIDEO_MX2=y
> +# CONFIG_RADIO_ADAPTERS is not set
>  CONFIG_FB=y
>  CONFIG_FB_IMX=y
>  CONFIG_FRAMEBUFFER_CONSOLE=y
>  CONFIG_FONTS=y
>  CONFIG_FONT_8x8=y
> -# CONFIG_HID_SUPPORT is not set
> -CONFIG_USB=m
> +CONFIG_SOUND=y
> +CONFIG_SND=y
> +CONFIG_SND_SEQUENCER=y
> +CONFIG_SND_MIXER_OSS=y
> +CONFIG_SND_PCM_OSS=y
> +CONFIG_SND_SEQUENCER_OSS=y
> +# CONFIG_SND_DRIVERS is not set
> +# CONFIG_SND_ARM is not set
> +# CONFIG_SND_SPI is not set
> +# CONFIG_SND_USB is not set
> +CONFIG_SND_SOC=y
> +CONFIG_SND_IMX_SOC=y
> +CONFIG_SND_SOC_PHYCORE_AC97=y
> +CONFIG_SND_SOC_EUKREA_TLV320=y
> +# CONFIG_USB_HID is not set
> +CONFIG_USB=y
>  # CONFIG_USB_DEVICE_CLASS is not set
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_MXC=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_ETH=y
>  CONFIG_USB_ULPI=y
> +CONFIG_NOP_USB_XCEIV=y
>  CONFIG_MMC=y
>  CONFIG_MMC_MXC=y
> +CONFIG_NEW_LEDS=y
> +CONFIG_LEDS_CLASS=y
> +CONFIG_LEDS_GPIO=y
> +CONFIG_LEDS_TRIGGERS=y
> +CONFIG_LEDS_TRIGGER_HEARTBEAT=y
>  CONFIG_RTC_CLASS=y
>  CONFIG_RTC_DRV_PCF8563=y
>  # CONFIG_DNOTIFY is not set
> @@ -119,7 +166,6 @@ CONFIG_UBIFS_FS=y
>  CONFIG_NFS_FS=y
>  CONFIG_NFS_V3=y
>  CONFIG_ROOT_NFS=y
> -CONFIG_NLS=y
>  CONFIG_NLS_CODEPAGE_437=m
>  CONFIG_NLS_CODEPAGE_850=m
>  CONFIG_NLS_ISO8859_1=y
> -- 
> 1.7.0.4
> 
> 

-- 
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[PATCH 2/5] mx25: add defconfig

[Eric Bénard]

Hi Uwe,

Le 15/10/2010 09:22, Uwe Kleine-K?nig a ?crit :
> On Fri, Oct 15, 2010 at 01:00:02AM +0200, Eric B?nard wrote:
>> Signed-off-by: Eric B?nard<eric@eukrea.com>
> I'd like to see mx25 in a defconfig, too.  In case RMK subjects
> that adding a defconfig isn't sensible, I think the best bet we have is
> merging mx3 and mx25 into mach-imx and working to allow compiling a
> kernel that supports these two in a single kernel.  (mx3 and mx25 share
> PHYS_OFFSET, so this is easier than the other merges.)
>
I think we can go with this defconfig for the short time and have more time to 
merge imx/mx25 and mx3.

Eric

[PATCH v2 1/5] mach-pcm037_eet: fix compile errors

[Eric Bénard]

this patch fix the following errors :
arch/arm/mach-mx3/mach-pcm037_eet.c:62: error: implicit declaration of function 'MXC_SPI_CS'
arch/arm/mach-mx3/mach-pcm037_eet.c:185: error: implicit declaration of function 'imx35_add_spi_imx0'

from the Kconfig pcm037 is i.MX31 based and not i.MX35 so replace
imx35_add_spi_imx0 by imx31_add_spi_imx0
this was introduced in commit : a4dc013570e08ec4947b10fa78080da767b30527

Signed-off-by: Eric B?nard <eric@eukrea.com>
Acked-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
v2 : fix according Uwe's comments
 arch/arm/mach-mx3/mach-pcm037_eet.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index c8b9821..99e0894 100644
--- a/arch/arm/mach-mx3/mach-pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
@@ -19,6 +19,7 @@
 
 #include "pcm037.h"
 #include "devices.h"
+#include "devices-imx31.h"
 
 static unsigned int pcm037_eet_pins[] = {
 	/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
@@ -181,7 +182,7 @@ static int eet_init_devices(void)
 	/* SPI */
 	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
 #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-	imx35_add_spi_imx0(&pcm037_spi1_pdata);
+	imx31_add_spi_imx0(&pcm037_spi1_pdata);
 #endif
 
 	platform_device_register(&pcm037_gpio_keys_device);
-- 
1.7.0.4

[PATCH v2 2/5] mx25: add defconfig

[Eric Bénard]

Signed-off-by: Eric B?nard <eric@eukrea.com>
---
 arch/arm/configs/mx25_defconfig |  159 +++++++++++++++++++++++++++++++++++++++
 1 files changed, 159 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/configs/mx25_defconfig

diff --git a/arch/arm/configs/mx25_defconfig b/arch/arm/configs/mx25_defconfig
new file mode 100644
index 0000000..25aa600
--- /dev/null
+++ b/arch/arm/configs/mx25_defconfig
@@ -0,0 +1,159 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_ARCH_MXC=y
+CONFIG_ARCH_MX25=y
+CONFIG_MACH_MX25_3DS=y
+CONFIG_MACH_EUKREA_CPUIMX25=y
+CONFIG_MXC_IRQ_PRIOR=y
+CONFIG_MXC_PWM=y
+CONFIG_MXC_DEBUG_BOARD=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+CONFIG_CAN_VCAN=y
+CONFIG_CAN_DEV=y
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_FLEXCAN=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_MXC=y
+CONFIG_MTD_UBI=y
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_FEC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_TSC2007=y
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_IMX=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_VIDEO_IR_I2C is not set
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_PLATFORM=y
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_FB=y
+CONFIG_FB_IMX=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_SOC_EUKREA_TLV320=y
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PCF8563=y
+CONFIG_DMADEVICES=y
+CONFIG_EXT3_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_AUTOFS4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
-- 
1.7.0.4

[PATCH v2 3/5] mx27: update defconfig

[Eric Bénard]

* input : add keyboard and compile ads7846 in kernel
* serial : compile 8250 in kernel
* gpio : add sysfs support
* media : add soc camera support
* sound : add soc audio support
* usb host : add ehci, mass storage support
* usb device : add eth gadget support
* leds : add gpio led support and heartbeat trigger

Signed-off-by: Eric B?nard <eric@eukrea.com>
---
v2 : add details change log
 arch/arm/configs/mx27_defconfig |   60 ++++++++++++++++++++++++++++++++++----
 1 files changed, 53 insertions(+), 7 deletions(-)

diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
index 813cfb3..9623f42 100644
--- a/arch/arm/configs/mx27_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -72,6 +72,10 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_MXC=y
 CONFIG_MTD_UBI=y
 CONFIG_EEPROM_AT24=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_FEC=y
@@ -79,12 +83,12 @@ CONFIG_FEC=y
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_KEYBOARD_IMX=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=m
+CONFIG_TOUCHSCREEN_ADS7846=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
@@ -94,21 +98,64 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_IMX=y
 CONFIG_SPI=y
 CONFIG_SPI_IMX=y
+CONFIG_GPIO_SYSFS=y
 CONFIG_W1=y
 CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_IMX2_WDT=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_MT9M001=y
+CONFIG_SOC_CAMERA_MT9M111=y
+CONFIG_SOC_CAMERA_MT9T031=y
+CONFIG_SOC_CAMERA_MT9T112=y
+CONFIG_SOC_CAMERA_MT9V022=y
+CONFIG_SOC_CAMERA_RJ54N1=y
+CONFIG_SOC_CAMERA_TW9910=y
+CONFIG_SOC_CAMERA_PLATFORM=y
+CONFIG_SOC_CAMERA_OV772X=y
+CONFIG_SOC_CAMERA_OV9640=y
+CONFIG_VIDEO_MX2=y
+# CONFIG_RADIO_ADAPTERS is not set
 CONFIG_FB=y
 CONFIG_FB_IMX=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=m
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_SOC_PHYCORE_AC97=y
+CONFIG_SND_SOC_EUKREA_TLV320=y
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
 # CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=y
 CONFIG_USB_ULPI=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
 CONFIG_MMC_MXC=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_DNOTIFY is not set
@@ -119,7 +166,6 @@ CONFIG_UBIFS_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-CONFIG_NLS=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_ISO8859_1=y
-- 
1.7.0.4

[PATCH v2 4/5] mx3: update defconfig

[Eric Bénard]

* add ARM errata 411920
* can : add flexcan support
* input : add imx keyuboard, gpio and tsc2007 support
* video : add lcd and backlight support
* sound : add soc audio support
* usb host : add ehci, mass storage support
* usb device : add eth gadget support
* leds : add gpio led support and heartbeat trigger
* rtc : add PCF8563 support

Signed-off-by: Eric B?nard <eric@eukrea.com>
---
v2 : add details change log
 arch/arm/configs/mx3_defconfig |   60 ++++++++++++++++++++++++++++++++++++++--
 1 files changed, 57 insertions(+), 3 deletions(-)

diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index f0c339f..5a3240e 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -27,6 +27,7 @@ CONFIG_MACH_KZM_ARM11_01=y
 CONFIG_MACH_EUKREA_CPUIMX35=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
+CONFIG_ARM_ERRATA_411920=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
@@ -49,6 +50,13 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+CONFIG_CAN_VCAN=y
+CONFIG_CAN_DEV=y
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_FLEXCAN=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_FW_LOADER=m
 CONFIG_MTD=y
@@ -63,6 +71,10 @@ CONFIG_MTD_NAND_MXC=y
 CONFIG_MTD_UBI=y
 # CONFIG_BLK_DEV is not set
 CONFIG_EEPROM_AT24=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_SMSC_PHY=y
 CONFIG_NET_ETHERNET=y
@@ -71,8 +83,12 @@ CONFIG_DNET=y
 CONFIG_FEC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_IMX=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_TSC2007=y
 # CONFIG_VT is not set
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_EXTENDED=y
@@ -84,6 +100,9 @@ CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_IMX=y
+CONFIG_GPIO_SYSFS=y
 CONFIG_W1=y
 CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y
@@ -104,9 +123,44 @@ CONFIG_SOC_CAMERA_OV772X=y
 CONFIG_VIDEO_MX3=y
 # CONFIG_RADIO_ADAPTERS is not set
 CONFIG_FB=y
-# CONFIG_USB_SUPPORT is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_MXC_SOC_WM1133_EV1=y
+CONFIG_SND_SOC_PHYCORE_AC97=y
+CONFIG_SND_SOC_EUKREA_TLV320=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=y
+CONFIG_USB_ULPI=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_MMC_MXC=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PCF8563=y
 CONFIG_DMADEVICES=y
 # CONFIG_DNOTIFY is not set
 CONFIG_TMPFS=y
-- 
1.7.0.4

[PATCH v2 5/5] mx51: update defconfig

[Eric Bénard]

* add CPUIMX51SD board support
* add ARM Erratas
* can : add MCP2515 support (for cpuimx51sd)
* mtd : add NAND support (for cpuimx51*)
* input : add keyboard, gpio and tsc2007 support
* i2c : add gpio i2c (for cpuimx51sd) and imx i2c
* spi : add imx spi
* USB host : add mass storage support
* USB device : add eth gadget support
* MMC : add sdhci support
* leds : add gpio led and heartbeat trigger
* fs : add ubifs

Signed-off-by: Eric B?nard <eric@eukrea.com>
---
v2 : add details change log
 arch/arm/configs/mx51_defconfig |   50 ++++++++++++++++++++++++++++++++------
 1 files changed, 42 insertions(+), 8 deletions(-)

diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
index 163cfee..93aaf8b 100644
--- a/arch/arm/configs/mx51_defconfig
+++ b/arch/arm/configs/mx51_defconfig
@@ -17,6 +17,11 @@ CONFIG_ARCH_MX5=y
 CONFIG_MACH_MX51_BABBAGE=y
 CONFIG_MACH_MX51_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX51=y
+CONFIG_MACH_EUKREA_CPUIMX51SD=y
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_458693=y
+CONFIG_ARM_ERRATA_460075=y
+CONFIG_ARM_ERRATA_743622=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT_VOLUNTARY=y
@@ -41,9 +46,21 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+CONFIG_CAN_DEV=y
+CONFIG_CAN_MCP251X=y
 # CONFIG_WIRELESS is not set
 # CONFIG_STANDALONE is not set
 CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_MXC=y
+CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
@@ -83,8 +100,13 @@ CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=m
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_MATRIX=y
+CONFIG_KEYBOARD_IMX=y
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_TSC2007=y
 CONFIG_SERIO_SERPORT=m
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_DEVKMEM is not set
@@ -94,24 +116,36 @@ CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_ALGOBIT=m
 CONFIG_I2C_ALGOPCF=m
 CONFIG_I2C_ALGOPCA=m
+CONFIG_I2C_GPIO=y
+CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_IMX=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=y
+CONFIG_USB_ULPI=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_PCF8563=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -136,6 +170,8 @@ CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_CONFIGFS_FS=m
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
@@ -158,8 +194,6 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_SECURITYFS=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 CONFIG_CRC_CCITT=m
-- 
1.7.0.4

[PATCH v2 2/5] mx25: add defconfig

[Baruch Siach]

Hi Eric,

On Fri, Oct 15, 2010 at 12:15:04PM +0200, Eric B?nard wrote:
> Signed-off-by: Eric B?nard <eric@eukrea.com>
> ---
>  arch/arm/configs/mx25_defconfig |  159 +++++++++++++++++++++++++++++++++++++++
>  1 files changed, 159 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/configs/mx25_defconfig
> 
> diff --git a/arch/arm/configs/mx25_defconfig b/arch/arm/configs/mx25_defconfig
> new file mode 100644
> index 0000000..25aa600
> --- /dev/null
> +++ b/arch/arm/configs/mx25_defconfig
> @@ -0,0 +1,159 @@

[snip]

> +CONFIG_RTC_CLASS=y
> +CONFIG_RTC_DRV_PCF8563=y

Shouldn't we enable CONFIG_RTC_DRV_IMXDI as well? This is the on-chip DryIce 
RTC.

baruch

-- 
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -