From: eric@eukrea.com (Eric Bénard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 4/5] mx3: update defconfig
Date: Fri, 15 Oct 2010 12:15:06 +0200 [thread overview]
Message-ID: <1287137707-9548-4-git-send-email-eric@eukrea.com> (raw)
In-Reply-To: <20101015070731.GF6747@pengutronix.de>
* add ARM errata 411920
* can : add flexcan support
* input : add imx keyuboard, gpio and tsc2007 support
* video : add lcd and backlight support
* sound : add soc audio support
* usb host : add ehci, mass storage support
* usb device : add eth gadget support
* leds : add gpio led support and heartbeat trigger
* rtc : add PCF8563 support
Signed-off-by: Eric B?nard <eric@eukrea.com>
---
v2 : add details change log
arch/arm/configs/mx3_defconfig | 60 ++++++++++++++++++++++++++++++++++++++--
1 files changed, 57 insertions(+), 3 deletions(-)
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index f0c339f..5a3240e 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -27,6 +27,7 @@ CONFIG_MACH_KZM_ARM11_01=y
CONFIG_MACH_EUKREA_CPUIMX35=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
+CONFIG_ARM_ERRATA_411920=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
@@ -49,6 +50,13 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+CONFIG_CAN_VCAN=y
+CONFIG_CAN_DEV=y
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_FLEXCAN=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_FW_LOADER=m
CONFIG_MTD=y
@@ -63,6 +71,10 @@ CONFIG_MTD_NAND_MXC=y
CONFIG_MTD_UBI=y
# CONFIG_BLK_DEV is not set
CONFIG_EEPROM_AT24=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_SMSC_PHY=y
CONFIG_NET_ETHERNET=y
@@ -71,8 +83,12 @@ CONFIG_DNET=y
CONFIG_FEC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_IMX=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_TSC2007=y
# CONFIG_VT is not set
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_EXTENDED=y
@@ -84,6 +100,9 @@ CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_IMX=y
+CONFIG_GPIO_SYSFS=y
CONFIG_W1=y
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_SLAVE_THERM=y
@@ -104,9 +123,44 @@ CONFIG_SOC_CAMERA_OV772X=y
CONFIG_VIDEO_MX3=y
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_FB=y
-# CONFIG_USB_SUPPORT is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_MXC_SOC_WM1133_EV1=y
+CONFIG_SND_SOC_PHYCORE_AC97=y
+CONFIG_SND_SOC_EUKREA_TLV320=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=y
+CONFIG_USB_ULPI=y
+CONFIG_NOP_USB_XCEIV=y
CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_MXC=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PCF8563=y
CONFIG_DMADEVICES=y
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
--
1.7.0.4
next prev parent reply other threads:[~2010-10-15 10:15 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-14 23:00 [PATCH 1/5] mach-pcm037_eet: fix compile errors Eric Bénard
2010-10-14 23:00 ` [PATCH 2/5] mx25: add defconfig Eric Bénard
2010-10-15 7:22 ` Uwe Kleine-König
2010-10-15 8:19 ` Eric Bénard
2010-10-14 23:00 ` [PATCH 3/5] mx27: update defconfig Eric Bénard
2010-10-15 7:27 ` Uwe Kleine-König
2010-10-14 23:00 ` [PATCH 4/5] mx3: " Eric Bénard
2010-10-14 23:00 ` [PATCH 5/5] mx51: " Eric Bénard
2010-10-15 7:07 ` [PATCH 1/5] mach-pcm037_eet: fix compile errors Uwe Kleine-König
2010-10-15 10:15 ` [PATCH v2 " Eric Bénard
2010-10-15 10:15 ` [PATCH v2 2/5] mx25: add defconfig Eric Bénard
2010-10-16 18:33 ` Baruch Siach
2010-10-15 10:15 ` [PATCH v2 3/5] mx27: update defconfig Eric Bénard
2010-10-15 10:15 ` Eric Bénard [this message]
2010-10-15 10:15 ` [PATCH v2 5/5] mx51: " Eric Bénard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1287137707-9548-4-git-send-email-eric@eukrea.com \
--to=eric@eukrea.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).