From: simon@sequanux.org (Simon Guinot)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] [ARM] Kirkwood: add fan support for Network Space Max v2
Date: Sun, 17 Oct 2010 17:50:12 +0200 [thread overview]
Message-ID: <1287330612-11256-2-git-send-email-simon@sequanux.org> (raw)
In-Reply-To: <1287330612-11256-1-git-send-email-simon@sequanux.org>
From: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Simon Guinot <sguinot@lacie.com>
---
arch/arm/mach-kirkwood/netspace_v2-setup.c | 43 ++++++++++++++++++++++++++++
1 files changed, 43 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index fed264d..8e14147 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -30,6 +30,7 @@
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/leds.h>
+#include <linux/gpio-fan.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
@@ -137,6 +138,46 @@ static struct platform_device netspace_v2_leds = {
};
/*****************************************************************************
+ * GPIO fan
+ ****************************************************************************/
+
+/* Designed for fan 40x40x16: ADDA AD0412LB-D50 6000rpm at 12v */
+static struct gpio_fan_speed netspace_max_v2_fan_speed[] = {
+ { 0, 0 },
+ { 1500, 15 },
+ { 1700, 14 },
+ { 1800, 13 },
+ { 2100, 12 },
+ { 3100, 11 },
+ { 3300, 10 },
+ { 4300, 9 },
+ { 5500, 8 },
+};
+
+static unsigned netspace_max_v2_fan_ctrl[] = { 22, 7, 33, 23 };
+
+static struct gpio_fan_alarm netspace_max_v2_fan_alarm = {
+ .gpio = 25,
+ .active_low = 1,
+};
+
+static struct gpio_fan_platform_data netspace_max_v2_fan_data = {
+ .num_ctrl = ARRAY_SIZE(netspace_max_v2_fan_ctrl),
+ .ctrl = netspace_max_v2_fan_ctrl,
+ .alarm = &netspace_max_v2_fan_alarm,
+ .num_speed = ARRAY_SIZE(netspace_max_v2_fan_speed),
+ .speed = netspace_max_v2_fan_speed,
+};
+
+static struct platform_device netspace_max_v2_gpio_fan = {
+ .name = "gpio-fan",
+ .id = -1,
+ .dev = {
+ .platform_data = &netspace_max_v2_fan_data,
+ },
+};
+
+/*****************************************************************************
* General Setup
****************************************************************************/
@@ -205,6 +246,8 @@ static void __init netspace_v2_init(void)
platform_device_register(&netspace_v2_leds);
platform_device_register(&netspace_v2_gpio_leds);
platform_device_register(&netspace_v2_gpio_buttons);
+ if (machine_is_netspace_max_v2())
+ platform_device_register(&netspace_max_v2_gpio_fan);
if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 &&
gpio_direction_output(NETSPACE_V2_GPIO_POWER_OFF, 0) == 0)
--
1.6.3.1
next prev parent reply other threads:[~2010-10-17 15:50 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-22 10:54 [PATCH 4/5] hwmon: DNS323 rev C1 fan support Benjamin Herrenschmidt
2010-05-22 11:00 ` Benjamin Herrenschmidt
2010-10-13 11:59 ` Simon Guinot
2010-10-13 16:34 ` [lm-sensors] " Guenter Roeck
2010-10-17 15:40 ` Simon Guinot
2010-10-17 15:50 ` [PATCH 1/2] hwmon: add generic GPIO fan driver Simon Guinot
2010-10-17 15:50 ` Simon Guinot [this message]
2010-10-22 1:53 ` [PATCH 2/2] [ARM] Kirkwood: add fan support for Network Space Max v2 Guenter Roeck
2010-10-22 2:08 ` Nicolas Pitre
2010-10-22 4:30 ` Guenter Roeck
2010-10-22 9:29 ` [PATCH] " Simon Guinot
2010-10-22 9:59 ` Guenter Roeck
2010-10-22 8:27 ` [PATCH 2/2] " Simon Guinot
2010-10-22 9:58 ` Guenter Roeck
2010-10-22 18:39 ` Guenter Roeck
2010-10-22 18:50 ` Nicolas Pitre
2010-10-18 16:08 ` [PATCH 1/2] hwmon: add generic GPIO fan driver Guenter Roeck
2010-10-18 18:00 ` Chris Moore
2010-10-18 18:35 ` Guenter Roeck
2010-10-18 20:36 ` Simon Guinot
2010-10-18 20:50 ` Guenter Roeck
2010-10-19 11:46 ` Simon Guinot
2010-10-19 14:52 ` Guenter Roeck
2010-10-19 6:52 ` Guenter Roeck
2010-10-19 8:36 ` Simon Guinot
2010-10-19 15:15 ` Guenter Roeck
2010-10-19 19:30 ` Simon Guinot
2010-10-21 20:07 ` Simon Guinot
2010-10-21 20:26 ` Guenter Roeck
2010-10-19 22:03 ` Guenter Roeck
2010-10-20 0:19 ` Simon Guinot
2010-10-20 0:50 ` Guenter Roeck
2010-10-20 7:59 ` Simon Guinot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1287330612-11256-2-git-send-email-simon@sequanux.org \
--to=simon@sequanux.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).