From: leiwen@marvell.com (Lei Wen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V3 1/6] pxa3xx_nand: make scan procedure more clear
Date: Fri, 22 Oct 2010 18:14:39 +0800 [thread overview]
Message-ID: <1287742484-4276-2-git-send-email-leiwen@marvell.com> (raw)
In-Reply-To: <1287742484-4276-1-git-send-email-leiwen@marvell.com>
Signed-off-by: Lei Wen <leiwen@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
---
drivers/mtd/nand/pxa3xx_nand.c | 98 ++++++++++++++++++++++------------------
1 files changed, 54 insertions(+), 44 deletions(-)
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 17f8518..aff28dc 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -126,6 +126,7 @@ struct pxa3xx_nand_info {
unsigned int buf_start;
unsigned int buf_count;
+ struct mtd_info *mtd;
/* DMA information */
int drcmr_dat;
int drcmr_cmd;
@@ -1044,34 +1045,26 @@ static void pxa3xx_nand_init_mtd(struct mtd_info *mtd,
this->chip_delay = 25;
}
-static int pxa3xx_nand_probe(struct platform_device *pdev)
+static struct pxa3xx_nand_info *alloc_nand_resource(struct platform_device *pdev)
{
- struct pxa3xx_nand_platform_data *pdata;
+ struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
struct pxa3xx_nand_info *info;
- struct nand_chip *this;
struct mtd_info *mtd;
struct resource *r;
- int ret = 0, irq;
-
- pdata = pdev->dev.platform_data;
-
- if (!pdata) {
- dev_err(&pdev->dev, "no platform data defined\n");
- return -ENODEV;
- }
+ int ret, irq;
mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct pxa3xx_nand_info),
GFP_KERNEL);
if (!mtd) {
dev_err(&pdev->dev, "failed to allocate memory\n");
- return -ENOMEM;
+ return NULL;
}
info = (struct pxa3xx_nand_info *)(&mtd[1]);
info->pdev = pdev;
- this = &info->nand_chip;
mtd->priv = info;
+ info->mtd = mtd;
mtd->owner = THIS_MODULE;
info->clk = clk_get(&pdev->dev, NULL);
@@ -1149,31 +1142,9 @@ static int pxa3xx_nand_probe(struct platform_device *pdev)
}
pxa3xx_nand_init_mtd(mtd, info);
+ platform_set_drvdata(pdev, info);
- platform_set_drvdata(pdev, mtd);
-
- if (nand_scan(mtd, 1)) {
- dev_err(&pdev->dev, "failed to scan nand\n");
- ret = -ENXIO;
- goto fail_free_irq;
- }
-
-#ifdef CONFIG_MTD_PARTITIONS
- if (mtd_has_cmdlinepart()) {
- static const char *probes[] = { "cmdlinepart", NULL };
- struct mtd_partition *parts;
- int nr_parts;
-
- nr_parts = parse_mtd_partitions(mtd, probes, &parts, 0);
-
- if (nr_parts)
- return add_mtd_partitions(mtd, parts, nr_parts);
- }
-
- return add_mtd_partitions(mtd, pdata->parts, pdata->nr_parts);
-#else
- return 0;
-#endif
+ return info;
fail_free_irq:
free_irq(irq, info);
@@ -1193,13 +1164,13 @@ fail_put_clk:
clk_put(info->clk);
fail_free_mtd:
kfree(mtd);
- return ret;
+ return NULL;
}
static int pxa3xx_nand_remove(struct platform_device *pdev)
{
- struct mtd_info *mtd = platform_get_drvdata(pdev);
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
+ struct mtd_info *mtd = info->mtd;
struct resource *r;
int irq;
@@ -1230,11 +1201,50 @@ static int pxa3xx_nand_remove(struct platform_device *pdev)
return 0;
}
+static int pxa3xx_nand_probe(struct platform_device *pdev)
+{
+ struct pxa3xx_nand_platform_data *pdata;
+ struct pxa3xx_nand_info *info;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data defined\n");
+ return -ENODEV;
+ }
+
+ info = alloc_nand_resource(pdev);
+ if (info == NULL)
+ return -ENOMEM;
+
+ if (nand_scan(info->mtd, 1)) {
+ dev_err(&pdev->dev, "failed to scan nand\n");
+ pxa3xx_nand_remove(pdev);
+ return -ENODEV;
+ }
+
+#ifdef CONFIG_MTD_PARTITIONS
+ if (mtd_has_cmdlinepart()) {
+ static const char *probes[] = { "cmdlinepart", NULL };
+ struct mtd_partition *parts;
+ int nr_parts;
+
+ nr_parts = parse_mtd_partitions(info->mtd, probes, &parts, 0);
+
+ if (nr_parts)
+ return add_mtd_partitions(mtd, parts, nr_parts);
+ }
+
+ return add_mtd_partitions(mtd, pdata->parts, pdata->nr_parts);
+#else
+ return 0;
+#endif
+}
+
#ifdef CONFIG_PM
static int pxa3xx_nand_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct mtd_info *mtd = (struct mtd_info *)platform_get_drvdata(pdev);
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
+ struct mtd_info *mtd = info->mtd;
if (info->state != STATE_READY) {
dev_err(&pdev->dev, "driver busy, state = %d\n", info->state);
@@ -1246,8 +1256,8 @@ static int pxa3xx_nand_suspend(struct platform_device *pdev, pm_message_t state)
static int pxa3xx_nand_resume(struct platform_device *pdev)
{
- struct mtd_info *mtd = (struct mtd_info *)platform_get_drvdata(pdev);
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
+ struct mtd_info *mtd = info->mtd;
nand_writel(info, NDTR0CS0, info->ndtr0cs0);
nand_writel(info, NDTR1CS0, info->ndtr1cs0);
--
1.7.0.4
next prev parent reply other threads:[~2010-10-22 10:14 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-22 10:14 [PATCH V3 0/6] pxa3xx_nand update series set Lei Wen
2010-10-22 10:14 ` Lei Wen [this message]
2010-10-22 10:14 ` [PATCH V3 2/6] pxa3xx_nand: rework irq logic Lei Wen
2011-02-13 9:46 ` Eric Miao
2011-02-13 15:46 ` Lei Wen
2010-10-22 10:14 ` [PATCH V3 3/6] pxa3xx_nand: discard wait_for_event, write_cmd, __readid function Lei Wen
2011-02-13 9:47 ` Eric Miao
2010-10-22 10:14 ` [PATCH V3 4/6] pxa3xx_nand: unify prepare command Lei Wen
2010-10-22 10:14 ` [PATCH V3 5/6] pxa3xx_nand: mtd scan id process could be defined by driver itself Lei Wen
2010-10-22 10:14 ` [PATCH V3 6/6] pxa3xx_nand: clean the keep configure code Lei Wen
2010-10-22 10:15 ` [PATCH V3 0/6] pxa3xx_nand update series set Haojian Zhuang
2010-11-19 4:42 ` Lei Wen
2010-12-25 4:31 ` Lei Wen
2011-02-12 14:57 ` Eric Miao
2011-02-12 15:01 ` Lei Wen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1287742484-4276-2-git-send-email-leiwen@marvell.com \
--to=leiwen@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).