From: cyril@ti.com (Cyril Chemparathy)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 02/12] davinci: add tnetv107x ssp platform device
Date: Mon, 15 Nov 2010 14:12:04 -0500 [thread overview]
Message-ID: <1289848334-8695-3-git-send-email-cyril@ti.com> (raw)
In-Reply-To: <1289848334-8695-1-git-send-email-cyril@ti.com>
This patch adds an SSP platform device definition for the tnetv107x soc family.
The clock lookup entry has also been updated to match.
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
---
arch/arm/mach-davinci/devices-tnetv107x.c | 25 ++++++++++++++++++++++++
arch/arm/mach-davinci/include/mach/tnetv107x.h | 2 +
arch/arm/mach-davinci/tnetv107x.c | 2 +-
3 files changed, 28 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c
index 85503de..6162cae 100644
--- a/arch/arm/mach-davinci/devices-tnetv107x.c
+++ b/arch/arm/mach-davinci/devices-tnetv107x.c
@@ -35,6 +35,7 @@
#define TNETV107X_SDIO0_BASE 0x08088700
#define TNETV107X_SDIO1_BASE 0x08088800
#define TNETV107X_KEYPAD_BASE 0x08088a00
+#define TNETV107X_SSP_BASE 0x08088c00
#define TNETV107X_ASYNC_EMIF_CNTRL_BASE 0x08200000
#define TNETV107X_ASYNC_EMIF_DATA_CE0_BASE 0x30000000
#define TNETV107X_ASYNC_EMIF_DATA_CE1_BASE 0x40000000
@@ -342,6 +343,25 @@ static struct platform_device tsc_device = {
.resource = tsc_resources,
};
+static struct resource ssp_resources[] = {
+ {
+ .start = TNETV107X_SSP_BASE,
+ .end = TNETV107X_SSP_BASE + 0x1ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_TNETV107X_SSP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device ssp_device = {
+ .name = "ti-ssp",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ssp_resources),
+ .resource = ssp_resources,
+};
+
void __init tnetv107x_devices_init(struct tnetv107x_device_info *info)
{
int i, error;
@@ -380,4 +400,9 @@ void __init tnetv107x_devices_init(struct tnetv107x_device_info *info)
keypad_device.dev.platform_data = info->keypad_config;
platform_device_register(&keypad_device);
}
+
+ if (info->ssp_config) {
+ ssp_device.dev.platform_data = info->ssp_config;
+ platform_device_register(&ssp_device);
+ }
}
diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h
index 5a681d8..89c1fdc 100644
--- a/arch/arm/mach-davinci/include/mach/tnetv107x.h
+++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h
@@ -34,6 +34,7 @@
#include <linux/serial_8250.h>
#include <linux/input/matrix_keypad.h>
+#include <linux/mfd/ti_ssp.h>
#include <mach/mmc.h>
#include <mach/nand.h>
@@ -44,6 +45,7 @@ struct tnetv107x_device_info {
struct davinci_mmc_config *mmc_config[2]; /* 2 controllers */
struct davinci_nand_pdata *nand_config[4]; /* 4 chipsels */
struct matrix_keypad_platform_data *keypad_config;
+ struct ti_ssp_data *ssp_config;
};
extern struct platform_device tnetv107x_wdt_device;
diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c
index 6fcdece..1b28fdd 100644
--- a/arch/arm/mach-davinci/tnetv107x.c
+++ b/arch/arm/mach-davinci/tnetv107x.c
@@ -278,7 +278,7 @@ static struct clk_lookup clks[] = {
CLK(NULL, "timer1", &clk_timer1),
CLK("tnetv107x_wdt.0", NULL, &clk_wdt_arm),
CLK(NULL, "clk_wdt_dsp", &clk_wdt_dsp),
- CLK("ti-ssp.0", NULL, &clk_ssp),
+ CLK("ti-ssp", NULL, &clk_ssp),
CLK(NULL, "clk_tdm0", &clk_tdm0),
CLK(NULL, "clk_vlynq", &clk_vlynq),
CLK(NULL, "clk_mcdma", &clk_mcdma),
--
1.7.1
next prev parent reply other threads:[~2010-11-15 19:12 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-15 19:12 [PATCH v5 00/12] tnetv107x ssp drivers Cyril Chemparathy
2010-11-15 19:12 ` [PATCH v5 01/12] misc: add driver for sequencer serial port Cyril Chemparathy
2010-11-16 7:10 ` Grant Likely
2010-11-16 16:15 ` Cyril Chemparathy
2010-11-16 20:35 ` Grant Likely
2010-11-16 21:19 ` Cyril Chemparathy
2010-11-16 22:23 ` Russell King - ARM Linux
2010-11-16 23:57 ` Grant Likely
2010-11-15 19:12 ` Cyril Chemparathy [this message]
2010-11-15 19:12 ` [PATCH v5 03/12] davinci: add ssp config for tnetv107x evm board Cyril Chemparathy
2010-11-15 19:12 ` [PATCH v5 04/12] spi: add ti-ssp spi master driver Cyril Chemparathy
2010-11-15 21:59 ` Ryan Mallon
2010-11-16 7:22 ` Grant Likely
2010-11-16 7:47 ` Grant Likely
2010-11-16 11:34 ` Mark Brown
2010-11-16 20:45 ` Grant Likely
2010-11-16 22:48 ` Mark Brown
2010-11-17 0:17 ` Cyril Chemparathy
2010-11-17 13:31 ` Mark Brown
2010-11-17 15:25 ` David Brownell
2010-11-17 17:54 ` Cyril Chemparathy
2010-11-17 16:11 ` Grant Likely
2010-11-17 17:23 ` Mark Brown
2010-11-17 17:35 ` Cyril Chemparathy
2010-11-18 5:46 ` Greg KH
2010-11-25 23:32 ` Rafael J. Wysocki
2010-11-16 14:19 ` David Brownell
2010-11-15 19:12 ` [PATCH v5 05/12] davinci: add spi devices on tnetv107x evm Cyril Chemparathy
2010-11-15 19:12 ` [PATCH v5 06/12] regulator: add driver for tps6524x regulator Cyril Chemparathy
2010-11-15 19:12 ` [PATCH v5 07/12] davinci: add tnetv107x evm regulators Cyril Chemparathy
2010-11-15 19:12 ` [PATCH v5 08/12] gpio: add ti-ssp gpio driver Cyril Chemparathy
2010-11-15 22:38 ` Ryan Mallon
2010-11-16 19:38 ` Cyril Chemparathy
2010-11-15 19:12 ` [PATCH v5 09/12] davinci: add tnetv107x evm ti-ssp gpio device Cyril Chemparathy
2010-11-15 19:12 ` [PATCH v5 10/12] backlight: add support for tps6116x controller Cyril Chemparathy
2010-11-15 19:12 ` [PATCH v5 11/12] davinci: add tnetv107x evm backlight device Cyril Chemparathy
2010-11-15 19:12 ` [PATCH v5 12/12] davinci: add tnetv107x evm i2c eeprom device Cyril Chemparathy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1289848334-8695-3-git-send-email-cyril@ti.com \
--to=cyril@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).